hi there,
i have noticed that my hw sensors ouput is changing
in a disturbing way (notice temp0):
day 1:
hw.sensors.it0.temp0=255.00 degC
hw.sensors.it0.temp1=26.00 degC
hw.sensors.it0.temp2=36.00 degC
hw.sensors.it0.fan0=5625 RPM
hw.sensors.it0.fan1=0 RPM
hw.sensors.it0.fan2=0 RPM
hw.sensors.it0.volt0=1.76 VDC (VCORE_A)
hw.sensors.it0.volt1=2.46 VDC (VCORE_B)
hw.sensors.it0.volt2=3.31 VDC (+3.3V)
hw.sensors.it0.volt3=4.92 VDC (+5V)
hw.sensors.it0.volt4=12.10 VDC (+12V)
hw.sensors.it0.volt5=0.88 VDC (-12V)
hw.sensors.it0.volt6=-5.13 VDC (-5V)
hw.sensors.it0.volt7=5.11 VDC (+5VSB)
hw.sensors.it0.volt8=2.03 VDC (VBAT)
day 2:
hw.sensors.it0.temp0=0.00 degC
hw.sensors.it0.temp1=26.00 degC
hw.sensors.it0.temp2=36.00 degC
hw.sensors.it0.fan0=5625 RPM
hw.sensors.it0.fan1=0 RPM
hw.sensors.it0.fan2=0 RPM
hw.sensors.it0.volt0=1.76 VDC (VCORE_A)
hw.sensors.it0.volt1=2.46 VDC (VCORE_B)
hw.sensors.it0.volt2=3.33 VDC (+3.3V)
hw.sensors.it0.volt3=4.89 VDC (+5V)
hw.sensors.it0.volt4=12.10 VDC (+12V)
hw.sensors.it0.volt5=0.88 VDC (-12V)
hw.sensors.it0.volt6=-5.13 VDC (-5V)
hw.sensors.it0.volt7=5.11 VDC (+5VSB)
hw.sensors.it0.volt8=2.03 VDC (VBAT)
day 3:
hw.sensors.it0.temp0=255.00 degC
hw.sensors.it0.temp1=25.00 degC
hw.sensors.it0.temp2=35.00 degC
hw.sensors.it0.fan0=5443 RPM
hw.sensors.it0.fan1=0 RPM
hw.sensors.it0.fan2=0 RPM
hw.sensors.it0.volt0=1.76 VDC (VCORE_A)
hw.sensors.it0.volt1=2.46 VDC (VCORE_B)
hw.sensors.it0.volt2=3.33 VDC (+3.3V)
hw.sensors.it0.volt3=4.89 VDC (+5V)
hw.sensors.it0.volt4=12.10 VDC (+12V)
hw.sensors.it0.volt5=0.88 VDC (-12V)
hw.sensors.it0.volt6=-5.13 VDC (-5V)
hw.sensors.it0.volt7=5.11 VDC (+5VSB)
hw.sensors.it0.volt8=2.03 VDC (VBAT)
should i be worried?
OpenBSD 4.6 (GENERIC) #0: Wed Nov 4 13:07:50 CET 2009
r...@integer.obiit.org:/home/f/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron(tm) Processor ("AuthenticAMD" 686-class, 64KB L2 cache) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536440832 (511MB)
avail mem = 509902848 (486MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/12/02, BIOS32 rev. 0 @ 0xfdae0, SMBIOS
rev. 2.3 @ 0xf0630 (22 entries)
bios0: vendor American Megatrends Inc. version "07.00T" date 04/02/01
bios0: ECS 735FSX
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf7760/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xf400
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 735 PCI" rev 0x01
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce FX 5200" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x00
ohci0 at pci0 dev 2 function 2 "SiS 5597/5598 USB" rev 0x07: irq 5, version
1.0, legacy support
ohci1 at pci0 dev 2 function 3 "SiS 5597/5598 USB" rev 0x07: irq 10, version
1.0, legacy support
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0xd0: 735: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800BB-55HEA0>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
rl0 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq 12, address
00:08:a1:77:6d:50
rlphy0 at rl0 phy 0: RTL internal PHY
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8705F rev 2, EC port 0x290
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
biomask efed netmask ffed ttymask ffff
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
-f
--
foied vinom pipafo, cra carefo.
