Hi,
could someone give me a hint about what is going on with my broadband
module and fingerprint reader. Thing is that when I'm booting amd64
kernel I have:
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
and when I'm booting i386 kernel I have:
ugen0 at uhub0 port 2 "HP un2400 Mobile Broadband Module HP un2400
Mobile Broadband Module" rev 2.00/0.01 addr 2
It's interesting that they are somehow "mutually exclusive", meaning the
first one is not detected by i386 kernel and the second one by amd64 kernel.
Any hints?
Cheers,
pmp
amd64 usbdevs output:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 addr 2: high speed, power 168 mA, config 1, CKA7227(0xb082),
Chicony Electronics Co., Ltd.(0x04f2), rev 32.18, iSerialNumber SN0001
uvideo0
port 6 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub1
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub2
port 1 addr 2: full speed, self powered, config 1, HP Integrated
Module(0x171d), Broadcom Corp(0x03f0), rev 1.00
ubt0
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub3
port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint
Sensor(0x2810), AuthenTec(0x08ff), rev 17.03
ugen0
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub4
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub5
port 1 powered
port 2 powered
i386 usbdevs output:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub0
port 1 powered
port 2 addr 2: high speed, self powered, config 1, HP un2400 Mobile
Broadband Module(0x201d), HP un2400 Mobile Broadband Module(0x03f0), rev
0.01
ugen0
port 3 powered
port 4 powered
port 5 addr 3: high speed, power 168 mA, config 1, CKA7227(0xb082),
Chicony Electronics Co., Ltd.(0x04f2), rev 32.18, iSerialNumber SN0001
uvideo0
port 6 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub1
port 1 addr 2: high speed, power 100 mA, config 1, DataTraveler
2.0(0x1603), Kingston(0x0951), rev 2.00, iSerialNumber
899000000000000000000090
umass0
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub2
port 1 addr 2: full speed, self powered, config 1, HP Integrated
Module(0x171d), Broadcom Corp(0x03f0), rev 1.00
ubt0
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub3
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub4
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
uhub5
port 1 powered
port 2 powered
dmesgs:
OpenBSD 4.6-current (GENERIC.MP) #56: Mon Jan 4 17:26:38 MST 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2004357120 (1911MB)
avail mem = 1941385216 (1851MB)
RTC BIOS diagnostic error e3<clock_battery,ROM_cksum,config_unit>
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x77ac4000 (22 entries)
bios0: vendor Hewlett-Packard version "68PSU Ver. F.0E" date 09/14/2009
bios0: Hewlett-Packard HP EliteBook 2530p (FU435EA#ABB)
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC DMAR ASF! SSDT
SSDT SSDT
acpi0: wakeup devices LANC(S0) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5)
ECF0(S5) RP05(S5) ECF0(S5) RP06(S0) NIC_(S0) USB1(S0) USB2(S0) USB3(S0)
USB4(S0) USB5(S0) USB6(S0) U6RM(S0) EHC1(S0) EHC2(S0) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.30 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz, 1862.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (PCIB)
acpiprt5 at acpi0: bus 0 (PCI0)
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpitz0 at acpi0: critical temperature 105 degC
acpitz1 at acpi0: critical temperature 110 degC
acpitz2 at acpi0: critical temperature 110 degC
acpitz3 at acpi0: critical temperature 90 degC
acpitz4 at acpi0: critical temperature 105 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
cpu0: Enhanced SpeedStep 1862 MHz: speeds: 1867, 1866, 1600, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
int 22 (irq 10), address 00:23:5a:35:25:ca
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
16 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
17 (irq 10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
19 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic
1 int 17 (irq 10)
azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using
Analog Devices AD1984A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
16 (irq 10)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
17 (irq 10)
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1
int 17 (irq 10), MIMO 1T2R, MoW, address 00:22:fa:53:eb:28
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int
18 (irq 11)
pci3 at ppb2 bus 3
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
22 (irq 10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 68
"Ricoh 5C832 Firewire" rev 0x05 at pci4 dev 6 function 0 not configured
sdhc0 at pci4 dev 6 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 1 int
22 (irq 10)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci4 dev 6 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int
21 (irq 10), AHCI 1.2
ahci0: PHY offline on port 0
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, Hitachi HTS54322, FBEO> SCSI3
0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. CKA7227" rev 2.00/32.18 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
ubt0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00
addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
OpenBSD 4.6-current (GENERIC) #485: Tue Jan 5 13:35:44 MST 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error e3<clock_battery,ROM_cksum,config_unit>
cpu0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz ("GenuineIntel"
686-class) 1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem = 2004975616 (1912MB)
avail mem = 1933991936 (1844MB)
RTC BIOS diagnostic error e3<clock_battery,ROM_cksum,config_unit>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/10/09, SMBIOS rev. 2.4 @
0x77ac4000 (22 entries)
bios0: vendor Hewlett-Packard version "68PSU Ver. F.0E" date 09/14/2009
bios0: Hewlett-Packard HP EliteBook 2530p (FU435EA#ABB)
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC DMAR ASF! SSDT
SSDT SSDT
acpi0: wakeup devices LANC(S0) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5)
ECF0(S5) RP05(S5) ECF0(S5) RP06(S0) NIC_(S0) USB1(S0) USB2(S0) USB3(S0)
USB4(S0) USB5(S0) USB6(S0) U6RM(S0) EHC1(S0) EHC2(S0) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (PCIB)
acpiprt5 at acpi0: bus 0 (PCI0)
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpitz0 at acpi0: critical temperature 105 degC
acpitz1 at acpi0: critical temperature 110 degC
acpitz2 at acpi0: critical temperature 110 degC
acpitz3 at acpi0: critical temperature 90 degC
acpitz4 at acpi0: critical temperature 105 degC
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xf800!
cpu0: Enhanced SpeedStep 1863 MHz: speeds: 1867, 1866, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
int 22 (irq 10), address 00:23:5a:35:25:ca
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
16 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
17 (irq 10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
19 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic
1 int 17 (irq 10)
azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using
Analog Devices AD1984A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
16 (irq 10)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
17 (irq 10)
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1
int 17 (irq 10), MIMO 1T2R, MoW, address 00:22:fa:53:eb:28
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int
18 (irq 11)
pci3 at ppb2 bus 3
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
22 (irq 10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci4 at ppb3 bus 68
"Ricoh 5C832 Firewire" rev 0x05 at pci4 dev 6 function 0 not configured
sdhc0 at pci4 dev 6 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 1 int
22 (irq 10)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci4 dev 6 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int
21 (irq 10), AHCI 1.2
ahci0: PHY offline on port 0
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, Hitachi HTS54322, FBEO> SCSI3
0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable
sd1: 3832MB, 512 bytes/sec, 7847936 sec total
ugen0 at uhub0 port 2 "HP un2400 Mobile Broadband Module HP un2400
Mobile Broadband Module" rev 2.00/0.01 addr 2
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. CKA7227" rev 2.00/32.18 addr 3
video0 at uvideo0
ubt0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00
addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd1a swap on sd1b dump on sd1b
