Here are the not configured grep: l...@bsdanywhere:~$ dmesg | grep 'not configured' ipmi at mainbus0 not configured "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 0 not configured "Intel X58 QuickPath" rev 0x13 at pci0 dev 16 function 1 not configured "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 0 not configured "Intel X58 QuickPath" rev 0x13 at pci0 dev 17 function 1 not configured "Intel X58 IOxAPIC" rev 0x13 at pci0 dev 19 function 0 not configured "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured "Intel X58 Throttle" rev 0x13 at pci0 dev 20 function 3 not configured vendor "Intel", unknown product 0x342f (class system subclass interrupt, rev 0x13) at pci0 dev 21 function 0 not configured vendor "Intel", unknown product 0x3430 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 0 not configured vendor "Intel", unknown product 0x3431 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 1 not configured vendor "Intel", unknown product 0x3432 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 2 not configured vendor "Intel", unknown product 0x3433 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 3 not configured vendor "Intel", unknown product 0x3429 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 4 not configured vendor "Intel", unknown product 0x342a (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 5 not configured vendor "Intel", unknown product 0x342b (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 6 not configured vendor "Intel", unknown product 0x342c (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 7 not configured "Symbios Logic SAS1078" rev 0x04 at pci22 dev 0 function 0 not configured
hopefully now without add. linebreaks. :) regards, tom > -----Original Message----- > From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] > On Behalf Of Stuart Henderson > Sent: Tuesday, February 02, 2010 7:26 PM > To: misc@openbsd.org > Subject: Re: Snapshot 4.7: LSI SAS 1078 controller on Intel > S5520UR -> No disks found! > > On 2010-02-02, Koenig, Thomas <tkoe...@tradegate.de> wrote: > > Hi, > > > > I try to install the current snapshot on a Intel S5520UR > board with LSI > > SAS 1078 controller. > > Install failed, because no disks found. If I not wrong, normaly the > > controller is supported since 4.3. by the mfi driver. The > board has the > > latest available firmware installed. > > > > Does anyone have some hints for me, or are additional infos > necessary? > > ^C into the shell from the installer, dmesg | grep 'not configured', > copy any likely-looking lines (by hand if necessary). > > Also see http://www.openbsd.org/faq/faq4.html#getdmesg - > the 'floppy disk' method will work for a USB drive, typically > on device /dev/sd0i (or sd1i, etc) rather than /dev/fd0a. [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
