your 880 has two internal fibre loops. you see teh disks once on the first loop, and again on the second loop.
i am slowly working on finishing mpath(4), which will let you see your disks once no matter how many paths you have to them. if someone could email me some spare time so i can finish working on it, that would be great. dlg On 02/03/2010, at 12:56 AM, Pete Vickers wrote: > Hei, > > > Upon booting either 4.6-RELEASE or 4.7-BETA on my SunFire 880 causes the > kernel it to 'see' twice the correct number of physical disk. Further if I > install the o/s using bsd.rd on to sd0, then upon reboot the kernel can't > find the root disk. However if I install on sd12 then booting etc is fine. > > the machine has physically 12 disks (36GB FC-AL), which appear to be > duplicated as sd0-sd11 and sd12-23. > > > r...@sf880 ~>sysctl hw.disknames > hw.disknames=cd0,sd0,sd1,sd2,sd3,sd4,sd5,sd6,sd7,sd8,sd9,sd10,sd11,sd12,sd13, > sd14,sd15,sd16,sd17,sd18,sd19,sd20,sd21,sd22,sd23 > > > > compare disk serial numbers : > > r...@sf880 ~>bioctl sd0 > sd0: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0N1K600007214DE8J > r...@sf880 ~>bioctl sd1 > sd1: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0JHHX00007214DDNK > > r...@sf880 ~>bioctl sd12 > sd12: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0N1K600007214DE8J > r...@sf880 ~>bioctl sd13 > sd13: <SEAGATE, ST336605FSUN36G, 0438>, serial 3FP0JHHX00007214DDNK > > > > > > full dmesg: > > > console is /p...@9,700000/e...@1/ser...@1,400000:a > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org > > OpenBSD 4.6 (GENERIC.MP) #53: Thu Jul 9 21:50:16 MDT 2009 > dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP > real mem = 4294967296 (4096MB) > avail mem = 4140875776 (3949MB) > mainbus0 at root: Sun Fire 880 > cpu0 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz > cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external > (512 b/l) > cpu1 at mainbus0: SUNW,UltraSPARC-III (rev 5.4) @ 750 MHz > cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 8192K external > (512 b/l) > "memory-controller" at mainbus0 not configured > "memory-controller" at mainbus0 not configured > schizo0 at mainbus0: "Schizo", version 4, ign 200, bus B 0 to 1 > schizo0: dvma map c0000000-ffffffff > pci0 at schizo0 > siop0 at pci0 dev 1 function 0 "Symbios Logic 53c875" rev 0x04: ivec 0x21c, > using 4K of on-board RAM > scsibus0 at siop0: 16 targets, initiator 7 > cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, DVD-ROM SD-M1401, 1009> SCSI2 5/cdrom > removable > ppb0 at pci0 dev 5 function 0 "DEC 21154 PCI-PCI" rev 0x05 > pci1 at ppb0 bus 1 > isp0 at pci1 dev 4 function 0 "QLogic ISP2200" rev 0x05: ivec 0x218 > isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > scsibus1 at isp0: 512 targets > sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd0: 34732MB, 512 bytes/sec, 71132959 sec total > sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd1: 34732MB, 512 bytes/sec, 71132959 sec total > sd2 at scsibus1 targ 2 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd2: 34732MB, 512 bytes/sec, 71132959 sec total > sd3 at scsibus1 targ 3 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd3: 34732MB, 512 bytes/sec, 71132959 sec total > sd4 at scsibus1 targ 4 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd4: 34732MB, 512 bytes/sec, 71132959 sec total > sd5 at scsibus1 targ 5 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd5: 34732MB, 512 bytes/sec, 71132959 sec total > ses0 at scsibus1 targ 6 lun 0: <SUNW, SUNWGS INT FCBPL, 9222> SCSI3 > 13/enclosure services fixed > sd6 at scsibus1 targ 7 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd6: 34732MB, 512 bytes/sec, 71132959 sec total > sd7 at scsibus1 targ 8 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd7: 34732MB, 512 bytes/sec, 71132959 sec total > sd8 at scsibus1 targ 9 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd8: 34732MB, 512 bytes/sec, 71132959 sec total > sd9 at scsibus1 targ 10 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd9: 34732MB, 512 bytes/sec, 71132959 sec total > sd10 at scsibus1 targ 11 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd10: 34732MB, 512 bytes/sec, 71132959 sec total > sd11 at scsibus1 targ 12 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd11: 34732MB, 512 bytes/sec, 71132959 sec total > isp1 at pci1 dev 5 function 0 "QLogic ISP2200" rev 0x05: ivec 0x219 > isp1: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > scsibus2 at isp1: 512 targets > schizo1 at mainbus0: "Schizo", version 4, ign 200, bus A 0 to 0 > schizo1: dvma map c0000000-ffffffff > pci2 at schizo1 > gem0 at pci2 dev 1 function 0 "Sun GEM" rev 0x01: ivec 0x200, address > 00:03:ba:08:de:01 > gentbi0 at gem0 phy 0: Generic ten-bit interface, rev. 0 > isp2 at pci2 dev 2 function 0 "QLogic ISP2200" rev 0x05: ivec 0x204 > isp2: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 > scsibus3 at isp2: 512 targets > sd12 at scsibus3 targ 0 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd12: 34732MB, 512 bytes/sec, 71132959 sec total > sd13 at scsibus3 targ 1 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd13: 34732MB, 512 bytes/sec, 71132959 sec total > sd14 at scsibus3 targ 2 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd14: 34732MB, 512 bytes/sec, 71132959 sec total > sd15 at scsibus3 targ 3 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd15: 34732MB, 512 bytes/sec, 71132959 sec total > sd16 at scsibus3 targ 4 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd16: 34732MB, 512 bytes/sec, 71132959 sec total > sd17 at scsibus3 targ 5 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd17: 34732MB, 512 bytes/sec, 71132959 sec total > ses1 at scsibus3 targ 6 lun 0: <SUNW, SUNWGS INT FCBPL, 9222> SCSI3 > 13/enclosure services fixed > sd18 at scsibus3 targ 7 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd18: 34732MB, 512 bytes/sec, 71132959 sec total > sd19 at scsibus3 targ 8 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd19: 34732MB, 512 bytes/sec, 71132959 sec total > sd20 at scsibus3 targ 9 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 0/direct > fixed > sd20: 34732MB, 512 bytes/sec, 71132959 sec total > sd21 at scsibus3 targ 10 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd21: 34732MB, 512 bytes/sec, 71132959 sec total > sd22 at scsibus3 targ 11 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd22: 34732MB, 512 bytes/sec, 71132959 sec total > sd23 at scsibus3 targ 12 lun 0: <SEAGATE, ST336605FSUN36G, 0438> SCSI3 > 0/direct fixed > sd23: 34732MB, 512 bytes/sec, 71132959 sec total > schizo2 at mainbus0: "Schizo", version 4, ign 240, bus B 0 to 0 > schizo2: dvma map c0000000-ffffffff > pci3 at schizo2 > ebus0 at pci3 dev 1 function 0 "Sun RIO EBus" rev 0x01 > "flashprom" at ebus0 addr 0-1fffff not configured > bbc0 at ebus0 addr 0-fffff: AID 0x00 > power0 at ebus0 addr 30002e-30002f, 300600-300607 > pcfiic0 at ebus0 addr 2e-2f, 2d-2d ivec 0x23 > iic0 at pcfiic0 > admtemp0 at iic0 addr 0x218: max1617 > admtemp1 at iic0 addr 0x219: max1617 > admtemp2 at iic0 addr 0x21a: max1617 > admtemp3 at iic0 addr 0x229: max1617 > admtemp4 at iic0 addr 0x22a: max1617 > admtemp5 at iic0 addr 0x22b: max1617 > admtemp6 at iic0 addr 0x24c: max1617 > pcfiic1 at ebus0 addr 30-31 ivec 0x23 > iic1 at pcfiic1 > "ssc100" at iic1 addr 0xb not configured > "smbus-ara" at iic1 addr 0xc not configured > "ssc100" at iic1 addr 0xd not configured > "ssc100" at iic1 addr 0xe not configured > "ssc100" at iic1 addr 0xf not configured > admtemp7 at iic1 addr 0x18: max1617 > admtemp8 at iic1 addr 0x1a: max1617 > "pcf8574" at iic1 addr 0x23 not configured > "x9241" at iic1 addr 0x2c not configured > "ltc1427" at iic1 addr 0x2d not configured > "x9241" at iic1 addr 0x2e not configured > "ltc1427" at iic1 addr 0x2f not configured > "pcf8574" at iic1 addr 0x38 not configured > "pcf8574" at iic1 addr 0x39 not configured > "pcf8574" at iic1 addr 0x3a not configured > "ssc050" at iic1 addr 0x40 not configured > "ssc050" at iic1 addr 0x41 not configured > "ssc050" at iic1 addr 0x44 not configured > "ssc050" at iic1 addr 0x45 not configured > "ssc050" at iic1 addr 0x46 not configured > "ssc050" at iic1 addr 0x47 not configured > "pcf8591" at iic1 addr 0x48 not configured > "pcf8591" at iic1 addr 0x49 not configured > "pcf8591" at iic1 addr 0x4a not configured > "pcf8591" at iic1 addr 0x4b not configured > lmtemp0 at iic1 addr 0x4e: lm75 > lmtemp1 at iic1 addr 0x4f: lm75 > "ds1307" at iic1 addr 0x68 not configured > "hpc3130" at iic1 addr 0x71 not configured > "hpc3130" at iic1 addr 0x73 not configured > "hpc3130" at iic1 addr 0x74 not configured > "hpc3130" at iic1 addr 0x76 not configured > bbc1 at ebus0 addr 500000-5fffff: AID 0x04 > pcfiic2 at ebus0 addr 50002e-50002f, 50002d-50002d ivec 0x28 > iic2 at pcfiic2 > admtemp9 at iic2 addr 0x229: max1617 > admtemp10 at iic2 addr 0x22a: max1617 > admtemp11 at iic2 addr 0x22b: max1617 > pcfiic3 at ebus0 addr 500030-500031 ivec 0x28 > iic3 at pcfiic3 > rtc0 at ebus0 addr 300070-300071 ivec 0x24: ds1287 > "gpio" at ebus0 addr 300600-300607 not configured > pmc0 at ebus0 addr 300700-300701 > "rsc-control" at ebus0 addr 3062f8-3062ff ivec 0x2e not configured > com0 at ebus0 addr 3083f8-3083ff ivec 0x2d: ns16550a, 16 byte fifo > sab0 at ebus0 addr 400000-40007f ivec 0x22: rev 3.2 > sabtty0 at sab0 port 0: console > sabtty1 at sab0 port 1 > gem1 at pci3 dev 1 function 1 "Sun ERI Ether" rev 0x01: ivec 0x25d, address > 00:03:ba:08:de:00 > luphy0 at gem1 phy 1: LU6612 10/100 PHY, rev. 1 > ohci0 at pci3 dev 1 function 3 "Sun USB" rev 0x01: ivec 0x25f, version 1.0, > legacy support > usb0 at ohci0: USB revision 1.0 > uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1 > schizo3 at mainbus0: "Schizo", version 4, ign 240, bus A 0 to 0 > schizo3: dvma map c0000000-ffffffff > pci4 at schizo3 > softraid0 at root > bootpath: /p...@8,600000/SUNW,q...@2,0/f...@0,0/d...@21000004cf27d31b,0 > root on sd12a swap on sd12b dump on sd12b
