Hi I have a problem with fsck, the size of the hard disk is 1.5 TB and the server has 2GB of memory, I'm monotoring it with top command and every time the SIZE reaches 1024MB and RES 517MB fsck crashes.
How could i resolve this? i haven't been able to check this disk. Thanks in advance for any help. # fsck /dev/sd3a ** /dev/rsd3a ** Last Mounted on /backup ** Phase 1 - Check Blocks and Sizes cannot allocate memory for inode cache #ulimit -a time(cpu-seconds) unlimited file(blocks) unlimited coredump(blocks) unlimited data(kbytes) 1048576 stack(kbytes) 8192 lockedmem(kbytes) 669066 memory(kbytes) 2005352 nofiles(descriptors) 128 processes 1310 #dmesg OpenBSD 4.5 (GENERAL.RAID) #0: Tue Jul 15 18:42:55 COT 2008 r...@backup.ingeurbe.com:/usr/src/sys/arch/i386/compile/NEIA.RAID RTC BIOS diagnostic error 80<clock_battery> cpu0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz ("GenuineIntel" 686-class) 1.80 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR real mem = 2135670784 (2036MB) avail mem = 2056396800 (1961MB) RTC BIOS diagnostic error 80<clock_battery> mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/23/08, SMBIOS rev. 2.4 @ 0xe33a0 (35 entries) bios0: vendor Intel Corp. version "ECG3510M.86A.0084.2008.0523.1528" date 05/23/2008 bios0: Intel Corporation DG35EC acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! acpi0: wakeup devices SLPB(S4) P32_(S4) PS2M(S4) PS2K(S4) UAR1(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) AZAL(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 4 (P32_) acpiprt2 at acpi0: bus 1 (PEX0) acpiprt3 at acpi0: bus 2 (PEX1) acpiprt4 at acpi0: bus 3 (PEX2) acpiprt5 at acpi0: bus -1 (PEX3) acpiprt6 at acpi0: bus -1 (PEX4) acpiprt7 at acpi0: bus -1 (PEX5) acpicpu0 at acpi0 acpibtn0 at acpi0: SLPB bios0: ROM list: 0xc0000/0xb200! 0xcb800/0x2400! 0xce000/0x1000 0xcf000/0x2000! 0xd1000/0x1000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82G35 Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82G35 Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x80000000, size 0x10000000 inteldrm0 at vga1: apic 2 int 16 (irq 11) drm0 at inteldrm0 "Intel 82G35 Video" rev 0x03 at pci0 dev 2 function 1 not configured em0 at pci0 dev 25 function 0 "Intel ICH8 IGP C" rev 0x02: apic 2 int 20 (irq 9), address 00:1c:c0:72:b3:a4 uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16 (irq 11) uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21 (irq 10) ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: apic 2 int 22 (irq 9) azalia0: codecs: Realtek ALC888 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17 (irq 255) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: apic 2 int 16 (irq 255) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: apic 2 int 18 (irq 255) pci3 at ppb2 bus 3 jmb0 at pci3 dev 0 function 0 "JMicron JMB368 IDE" rev 0x00 pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide0: using apic 2 int 18 (irq 11) for native-PCI interrupt pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 10) uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19 (irq 11) uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18 (irq 11) ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23 (irq 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2 pci4 at ppb3 bus 4 rl0 at pci4 dev 3 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq 11), address 00:40:f4:eb:69:f8 rlphy0 at rl0 phy 0: RTL internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM disabled ahci0 at pci0 dev 31 function 2 "Intel 82801H AHCI" rev 0x02: apic 2 int 19 (irq 11), AHCI 1.1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD15EADS-00R, 01.0> SCSI3 0/direct fixed sd0: 1430799MB, 512 bytes/sec, 2930277168 sec total sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD15EADS-00R, 01.0> SCSI3 0/direct fixed sd1: 1430799MB, 512 bytes/sec, 2930277168 sec total sd2 at scsibus0 targ 5 lun 0: <ATA, WDC WD15EADS-00R, 01.0> SCSI3 0/direct fixed sd2: 1430799MB, 512 bytes/sec, 2930277168 sec total ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 21 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 lm1 at wbsio0 port 0x6e0/8: W83627DHG npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support Kernelized RAIDframe activated raid0 at root: (RAID Level 1) total number of sectors is 10249344 (5004 MB) as root softraid0 at root softraid0: sd0b can not read metadata version 1952542829, expected 3 softraid0: sd1b can not read metadata version 0, expected 3 scsibus1 at softraid0: 1 targets sd3 at scsibus1 targ 0 lun 0: <OPENBSD, SR RAID 1, 003> SCSI2 0/direct fixed sd3: 1425721MB, 512 bytes/sec, 2919877931 sec total root on raid0a swapmount: no device raid0: Device already configured! raidlookup on device: /dev/sd9b failed ! raidlookup on device: /dev/sd2b failed ! RAIDFRAME: Did not find any live disks in the array. vnode was NULL vnode was NULL RAIDFRAME: failed rf_ConfigureDisks with 22. vnode was NULL vnode was NULL