My apologies beforehand for using this message again. I had set the Vert and Horiz values according to those here: http://forums.debian.net/viewtopic.php?f=16&t=20481&start=60 The monitor I have is the same, I did try out the recommendation and the results were the same. I also notice that the card is listed as a rage re/sg but the /usr README lists it pro pf. I have also loaded the ati driver during boot using -c DKM> enable ati. More information: 16" diagonal for visible screen, powermac blue and white model.
If there is anything else that I am missing, let me know. --- On Wed, 4/14/10, Bryan Irvine <sparcta...@gmail.com> wrote: From: Bryan Irvine <sparcta...@gmail.com> Subject: Re: Xorg.conf with OpenBSD 4.6 macppc does not work with alternate configuration To: "Super Biscuit" <super_bisq...@yahoo.com> Cc: misc@openbsd.org Date: Wednesday, April 14, 2010, 9:23 PM On Wed, Apr 14, 2010 at 2:13 PM, Super Biscuit <super_bisq...@yahoo.com> wrote: > $uname -a > OpenBSD moo.my.domain 4.6 GENERIC#43 macppc > > I have followed the howto section in the readme file and remain with an 8bit > resolution at 800x600. > If there is anything wrong with my configuration? > X did not start with new_xorg.conf.1.text or new_xorg.conf.2.txt. > The only working xorg.conf which had good resolution was from a previous > debian install done with an ubuntu live disk. > I do realize that there is a difference between the OSes; but, the xorg.conf > and resolutions should be the same for both. I went through this a few years and got it going with a little help from Nick. http://marc.info/?l=openbsd-misc&m=116492822327679&w=2 -B
