This is a recent -current on an Intel D510MO motherboard.
Generaly works OK, except for X on the Intel graphics.
See full dmesg and logs at bottom; the video device is
vga1 at pci0 dev 2 function 0 "Intel Pineview Integrated Graphics Controller"
rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
and pcidump -v says
0:2:0: Intel Pineview Integrated Graphics Controller
0x0000: Vendor ID: 8086 Product ID: a001
0x0004: Command: 0007 Status ID: 0090
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 02
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xf0200000
0x0014: BAR io addr: 0x000020c0
0x0018: BAR mem prefetchable 32bit addr: 0xe0000000
0x001c: BAR mem 32bit addr: 0xf0100000
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 4f4d
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
0x00d0: Capability 0x01: Power Management
Trying to run X results in
$ startx
xauth: creating new authority file /home/hans/.serverauth.24217
xauth: creating new authority file /home/hans/.Xauthority
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.7 i386
Current Operating System: OpenBSD box.stare.cz 4.7 GENERIC.MP#519 i386
Build Date: 15 April 2010 12:01:42AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 21 09:30:56 2010
(==) Using default built-in configuration (21 lines)
X: priv_init: open /dev/agp0: Device not configured
(EE) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation. Please enable agpgart
.X: priv_init: open /dev/drm0: Device not configured
X: priv_init: open /dev/drm0: Device not configured
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(EE) intel(0): AGP GART support is either not available or cannot be used.
Make sure your kernel has agpgart support or has
the agpgart module loaded.
(EE) intel(0): AGP GART support is either not available or cannot be used.
Make sure your kernel has agpgart support or has
the agpgart module loaded.
(EE) intel(0): Couldn't allocate video memory
Looking into the BIOS configuration of the video device,
I see that it uses DVMT, but whatever I set there ("fixed/auto",
"128M/256M" of memory), the intagp stays "not configured".
(BTW, given the superb documentation that comes with OpenBSD,
I got into the habit reading the man page of everything in
'dmesg | cut -f1 -d' ' but there doesn't seem to be any manpage
for intagp; the inline man.cgi doesn't know it either.
Did I miss something?)
Using an intagp sucessfully on another machine (an MSI board) with
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 10)
drm0 at inteldrm0
makes me think that whatever 'intagp' is, it is somehow working,
but neither "Intel Pineview Integrated Graphics Controller" nor
"Intel 82945G Video" is specificaly mentioned in i386.html#hardware.
Is my Intel graphics supported?
I can run X if I 'X -configure' it and
replace the detected "intel" driver with "vesa".
# Xorg -configure
# sed -e 's/intel/vesa/' < xorg.conf.new > /etc/X11/xorg.conf
$ startx
Using that, this is what the Xorg.0.log says about the device:
(II) Loader running on openbsd
(--) PCI:*(0:0:2:0) 8086:a001:8086:4f4d Intel Pineview Integrated Graphics
Controller rev 2, Mem @ 0xf0200000/524288, 0xe0000000/268435456,
0xf0100000/1048576, I/O @ 0x000020c0/8
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 8128 kB
(II) VESA(0): VESA VBE OEM: Intel(r)PineView Graphics Chip Accelerated VGA BIOS
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: Intel Corporation
(II) VESA(0): VESA VBE OEM Product: Intel(r)PineView Graphics Controller
(II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) VESA(0): virtual address = 0x84c31000,
physical address = 0xe0000000, size = 8323072
Is anyone using this video device with the intagp driver?
Is this the Xorg "intel" driver's business?
Than you for your time
Jan
OpenBSD 4.7-current (GENERIC.MP) #519: Sun Apr 18 22:21:54 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
real mem = 1055203328 (1006MB)
avail mem = 1012375552 (965MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/08/10, SMBIOS rev. 2.5 @ 0xe4410 (25
entries)
bios0: vendor Intel Corp. version "MOPNV10J.86A.0175.2010.0308.0620" date
03/08/2010
bios0: Intel Corporation D510MO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4)
ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3)
UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz ("GenuineIntel" 686-class) 1.67 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xda00! 0xce000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI Bridge" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Integrated Graphics Controller"
rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 8 int
22 (irq 9)
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 8 int 17
(irq 255)
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
apic 8 int 16 (irq 11), address 00:27:0e:07:09:9f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 8 int 16
(irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: apic 8 int 18
(irq 255)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 8 int 19
(irq 255)
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
(irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
(irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
(irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
(irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel Tigerpoint LPC Controller" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: apic 8 int 19
(irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, WDC WD6400BPVT-0, 01.0> SCSI3 0/direct fixed
sd0: 610480MB, 512 bytes/sec, 1250263728 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
(irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x84
lm1 at wbsio0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Chicony USB Keyboard" rev
1.10/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Chicony USB Keyboard" rev
1.10/1.02 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=2
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
