Hi there,
For the last two snapshots, I have started receiving the following
output in /var/log/daemon:
Apr 28 06:17:07 puffy pppd[5388]: Couldn't set device to non-blocking
mode: Inappropriate ioctl for device
A search of both @tech and @misc reveals only the suggestion that the
poster's kernel and pppd are out of sync but that is not the case here.
A google search and reading Stevens "Advanced Programming in the Unix
Environment" Terminal IO lead me to believe that a successful connection
to the isp would cause the DCD to be detected and the serial terminal to
be opened with O_RDWR...
I know that output is that is pasted above comes from
/usr/src/usr.sbin/pppd/sys-bsd.c. Unfortuately, I cannot trace the code
using the kdebug 2 option with pppd, so I don't know how to correct the
inappropriate ioctl message.
Pppd still works with this output, but I don't understand what would
have changed; I have not had this output before. The configuration
files have not changed either.
/var/log/daemon
Apr 28 06:16:55 puffy pppd[5388]: pppd 2.3.5 started by dave, uid 0
Apr 28 06:17:06 puffy pppd[5388]: Serial connection established.
Apr 28 06:17:07 puffy pppd[5388]: Couldn't set device to non-blocking
mode: Inappropriate ioctl for device
Apr 28 06:17:07 puffy pppd[5388]: Using interface ppp0
Apr 28 06:17:07 puffy pppd[5388]: Connect: ppp0 <--> /dev/cuaU0
Apr 28 06:17:07 puffy pppd[5388]: Remote message: Congratulations!
Apr 28 06:17:10 puffy pppd[5388]: local IP address 166.128.66.34
Apr 28 06:17:10 puffy pppd[5388]: remote IP address 72.215.255.9
Apr 28 06:19:37 puffy pppd[5388]: Connection terminated.
Apr 28 06:19:37 puffy pppd[5388]: Couldn't restore device fd flags:
Inappropriate ioctl for device
Apr 28 06:19:37 puffy pppd[5388]: ioctl(TIOCSETD): Inappropriate ioctl
for device
Apr 28 06:19:37 puffy named[18899]: shutting down
Apr 28 06:19:37 puffy named[18899]: stopping command channel on
127.0.0.1#953
Apr 28 06:19:37 puffy named[18899]: no longer listening on 127.0.0.1#53
Apr 28 06:19:37 puffy named[18899]: no longer listening on ::1#53
Apr 28 06:19:37 puffy named[18899]: exiting
Apr 28 06:19:38 puffy pppd[5388]: tcsetattr: Inappropriate ioctl for device
/etc/ppp/peers/umts
cuaU0
921600
:72.215.255.9
noipdefault
defaultroute
crtscts
modem
modem_chat
passive
asyncmap 0
lock
passive
noauth
user i...@cingulargprs.com
connect '/usr/sbin/chat -e -f /etc/ppp/peers/umts.chat'
/etc/ppp/peers/umts.chat
ABORT BUSY ABORT "NO ANSWER" ABORT "NO DIALTONE" ABORT "NO CARRIER"
'' AT
TIMEOUT 30
'' AT+CFUN=1 T+CFUN=1
'' OK
'' '+PACSP0'
'AT+CGDCONT=1,"IP","isp.cingular","0.0.0.0",0,1'
OK\r\n 'ATDT*99***1#'
\r\n \c
CONNECT \c
I start pppd with the following function:
function pppup {
if [[ $# -ne 0 ]]; then
echo 'Usage: pppup' >&2
return 2
fi
if [[ -n $(netstat -nrf inet | grep default) ]]; then
sudo ifconfig trunk0 down && sudo route -q delete default
fi
sudo ifconfig ppp0 create
sudo cp /etc/resolv.conf /etc/resolv.conf.bk
sudo cp /etc/resolv.localhost /etc/resolv.conf
sudo named && pppd call umts
}
Here is the dmesg:
OpenBSD 4.7-current (GENERIC.MP) #225: Tue Apr 27 11:25:08 MDT 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3177910272 (3030MB)
avail mem = 3079602176 (2936MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
bios0: vendor LENOVO version "6EET50WW (3.10 )" date 03/16/2010
bios0: LENOVO 2777CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP0(S4) EXP1(S4)
EXP2(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3)
EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU U9600 @ 1.60GHz, 1596.23 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU U9600 @ 1.60GHz, 1596.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG
cpu1: 3MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt4 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 105 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4641" serial 3086 type LiP oem "SONY"
acpibat1 at acpi0: BAT1 model "42T4642" serial 192 type LiP oem "SONY"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1601, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
int 20 (irq 11), address 00:22:68:1a:e4:f7
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
22 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic
1 int 17 (irq 11)
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
20 (irq 11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
21 (irq 11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1
int 17 (irq 11), MIMO 3T3R, MoW, address 00:21:6a:90:67:94
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
16 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
17 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci3 at ppb2 bus 21
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int
16 (irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA THNS128G, AGLA> SCSI3
0/direct fixed
sd0: 122104MB, 512 bytes/sec, 250069680 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1
int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
umodem0 at uhub1 port 4 configuration 1 interface 1 "Ericsson Ericsson
F3507g Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub1 port 4 configuration 1 interface 3 "Ericsson Ericsson
F3507g Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub1 port 4 configuration 1 interface 9 "Ericsson Ericsson
F3507g Mobile Broadband Minicard Composite Device" rev 2.00/0.00 addr 2
umodem2: data interface 12, has CM over data, has break
umodem2: no data interface
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
video0 at uvideo0
ugen0 at uhub2 port 2 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
Any suggestions?
TIA,
Dave
