Hello, I tried to install OpenBSD on an HP Compaq 6005 machine, but it's not booting OpenBSD from a CD-ROM. It prints the following messages:
CD-ROM: 9F Loading /4.7/I386/CDBOOT probing: pc0 com0 pci mem[ and then simply hangs. I've tried the latest 4.7 snapshot (both i386 and amd64) and 4.6/i386, all with the same results. The same machine runs Linux (Ubuntu 9.10, FWIW) just fine. I'm not sure it helps, but I've appended a Linux dmesg below (no OpenBSD dmesg since the thing won't boot). Any hints on how to solve the problem? Cheers, Rafael ---- Linux dmesg starts here ---- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-21-generic-pae (bui...@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #59-Ubuntu SMP Wed Mar 24 08:47:55 UTC 2010 (Ubuntu 2.6.31-21.59-generic-pae) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfbc6b00 (usable) [ 0.000000] BIOS-e820: 00000000dfbc6b00 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved) [ 0.000000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF00000000 write-back [ 0.000000] 1 base 0000E0000000 mask FFFFE0000000 uncachable [ 0.000000] 2 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfbc6b00 (usable) [ 0.000000] modified: 00000000dfbc6b00 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fed40000 (reserved) [ 0.000000] modified: 00000000fed45000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 3789c000 - 37fef334 [ 0.000000] Allocated new RAMDISK: 008f5000 - 01048334 [ 0.000000] Move RAMDISK from 000000003789c000 - 0000000037fef333 to 008f5000 - 01048333 [ 0.000000] ACPI: RSDP 000e5e10 00014 (v00 COMPAQ) [ 0.000000] ACPI: RSDT dfbd6b40 00040 (v01 HPQOEM SLIC-BPC 20090825 00000000) [ 0.000000] ACPI: FACP dfbd6be8 00074 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: DSDT dfbd6f5f 09709 (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E) [ 0.000000] ACPI: FACS dfbd6b00 00040 [ 0.000000] ACPI: APIC dfbd6c5c 00084 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: ASF! dfbd6ce0 00063 (v32 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: MCFG dfbd6d43 0003C (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: TCPA dfbd6d7f 00032 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: SLIC dfbd6db1 00176 (v01 HPQOEM SLIC-BPC 00000001 00000000) [ 0.000000] ACPI: HPET dfbd6f27 00038 (v01 COMPAQ HP_RS880 00000001 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3718MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008eca80] TEXT DATA BSS ==> [0000100000 - 00008eca80] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008ed000 - 00008f4128] BRK ==> [00008ed000 - 00008f4128] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [00008f5000 - 0001048334] NEW RAMDISK ==> [00008f5000 - 0001048334] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfbc6 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1047393 [ 0.000000] free_area_init_node: node 0, pgdat c07ae640, node_mem_map c1049000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7437 pages used for memmap [ 0.000000] HighMem zone: 812219 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xf808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10028300 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:14000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages at c3459000, static data 39036 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038176 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-21-generic-pae root=UUID=a9ca5a4c-ed05-4234-97cf-18eafc9c452a ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 23592960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00120000) [ 0.000000] Memory: 4112056k/4718592k available (4660k kernel code, 76688k reserved, 2216k data, 560k init, 3278624k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07b8000 - 0xc0844000 ( 560 kB) [ 0.000000] .data : 0xc058d130 - 0xc07b7288 (2216 kB) [ 0.000000] .text : 0xc0100000 - 0xc058d130 (4660 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2793.241 MHz processor. [ 0.000008] spurious 8259A interrupt: IRQ7. [ 0.001149] Console: colour VGA+ 80x25 [ 0.001151] console [tty0] enabled [ 0.001276] hpet clockevent registered [ 0.001281] alloc irq_desc for 24 on node 0 [ 0.001283] alloc kstat_irqs on node 0 [ 0.001286] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.48 BogoMIPS (lpj=11172964) [ 0.004017] Security Framework initialized [ 0.004029] AppArmor: AppArmor initialized [ 0.004033] Mount-cache hash table entries: 512 [ 0.004106] Initializing cgroup subsys ns [ 0.004108] Initializing cgroup subsys cpuacct [ 0.004111] Initializing cgroup subsys memory [ 0.004115] Initializing cgroup subsys devices [ 0.004116] Initializing cgroup subsys freezer [ 0.004118] Initializing cgroup subsys net_cls [ 0.004126] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004128] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004129] CPU: Physical Processor ID: 0 [ 0.004130] CPU: Processor Core ID: 0 [ 0.004133] mce: CPU supports 6 MCE banks [ 0.004139] using C1E aware idle routine [ 0.004144] Performance Counters: AMD PMU driver. [ 0.004146] ... version: 0 [ 0.004147] ... bit width: 48 [ 0.004149] ... generic counters: 4 [ 0.004150] ... value mask: 0000ffffffffffff [ 0.004151] ... max period: 00007fffffffffff [ 0.004152] ... fixed-purpose counters: 0 [ 0.004154] ... counter mask: 000000000000000f [ 0.004156] Checking 'hlt' instruction... OK. [ 0.021577] ACPI: Core revision 20090521 [ 0.032366] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072078] CPU0: AMD Phenom(tm) II X4 B93 Processor stepping 02 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5586.01 BogoMIPS (lpj=11172021) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.160910] CPU1: AMD Phenom(tm) II X4 B93 Processor stepping 02 [ 0.160917] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164018] System has AMD C1E enabled [ 0.164063] Switch to broadcast mode on CPU1 [ 0.164088] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5585.98 BogoMIPS (lpj=11171976) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.252884] CPU2: AMD Phenom(tm) II X4 B93 Processor stepping 02 [ 0.252905] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.256020] Switch to broadcast mode on CPU2 [ 0.256052] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5586.01 BogoMIPS (lpj=11172035) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.344936] CPU3: AMD Phenom(tm) II X4 B93 Processor stepping 02 [ 0.344999] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.348021] Brought up 4 CPUs [ 0.348023] Total of 4 processors activated (22344.49 BogoMIPS). [ 0.348020] Switch to broadcast mode on CPU3 [ 0.348060] CPU0 attaching sched-domain: [ 0.348062] domain 0: span 0-3 level MC [ 0.348064] groups: 0 1 2 3 [ 0.348069] CPU1 attaching sched-domain: [ 0.348070] domain 0: span 0-3 level MC [ 0.348072] groups: 1 2 3 0 [ 0.348075] CPU2 attaching sched-domain: [ 0.348077] domain 0: span 0-3 level MC [ 0.348078] groups: 2 3 0 1 [ 0.348082] CPU3 attaching sched-domain: [ 0.348083] domain 0: span 0-3 level MC [ 0.348084] groups: 3 0 1 2 [ 0.348146] Switch to broadcast mode on CPU0 [ 0.348146] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.348146] Booting paravirtualized kernel on bare hardware [ 0.348146] regulator: core version 0.5 [ 0.348146] Time: 13:36:10 Date: 05/06/10 [ 0.348146] NET: Registered protocol family 16 [ 0.348151] EISA bus registered [ 0.348159] ACPI: bus type pci registered [ 0.348205] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63 [ 0.348207] PCI: MCFG area at f4000000 reserved in E820 [ 0.348209] PCI: Using MMCONFIG for extended config space [ 0.348210] PCI: Using configuration type 1 for base access [ 0.348754] bio: create slab <bio-0> at 0 [ 0.348754] ACPI: EC: Look up EC in DSDT [ 0.352590] ACPI: Interpreter enabled [ 0.352595] ACPI: (supports S0 S3 S4 S5) [ 0.352609] ACPI: Using IOAPIC for interrupt routing [ 0.355120] ACPI: No dock devices found. [ 0.355408] ACPI Error (dsfield-0140): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.355413] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7414588), AE_ALREADY_EXISTS [ 0.355418] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 0.355432] ACPI Warning: \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 20090521 nspredef-328 [ 0.355437] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.355546] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.355548] pci 0000:00:02.0: PME# disabled [ 0.355583] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.355585] pci 0000:00:0a.0: PME# disabled [ 0.355631] pci 0000:00:11.0: reg 10 io port: [0x2110-0x2117] [ 0.355637] pci 0000:00:11.0: reg 14 io port: [0x2120-0x2123] [ 0.355643] pci 0000:00:11.0: reg 18 io port: [0x2118-0x211f] [ 0.355649] pci 0000:00:11.0: reg 1c io port: [0x2124-0x2127] [ 0.355655] pci 0000:00:11.0: reg 20 io port: [0x2100-0x210f] [ 0.355662] pci 0000:00:11.0: reg 24 32bit mmio: [0xf0209000-0xf02093ff] [ 0.355710] pci 0000:00:12.0: reg 10 32bit mmio: [0xf0204000-0xf0204fff] [ 0.355760] pci 0000:00:12.1: reg 10 32bit mmio: [0xf0205000-0xf0205fff] [ 0.355826] pci 0000:00:12.2: reg 10 32bit mmio: [0xf0209400-0xf02094ff] [ 0.355874] pci 0000:00:12.2: supports D1 D2 [ 0.355876] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.355880] pci 0000:00:12.2: PME# disabled [ 0.355909] pci 0000:00:13.0: reg 10 32bit mmio: [0xf0206000-0xf0206fff] [ 0.355958] pci 0000:00:13.1: reg 10 32bit mmio: [0xf0207000-0xf0207fff] [ 0.356067] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0209500-0xf02095ff] [ 0.356115] pci 0000:00:13.2: supports D1 D2 [ 0.356117] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.356120] pci 0000:00:13.2: PME# disabled [ 0.356233] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0200000-0xf0203fff] [ 0.356273] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.356276] pci 0000:00:14.2: PME# disabled [ 0.356372] pci 0000:00:14.5: reg 10 32bit mmio: [0xf0208000-0xf0208fff] [ 0.356495] pci 0000:02:00.0: reg 10 64bit mmio: [0xe0000000-0xefffffff] [ 0.356502] pci 0000:02:00.0: reg 18 64bit mmio: [0xf0100000-0xf010ffff] [ 0.356507] pci 0000:02:00.0: reg 20 io port: [0x1100-0x11ff] [ 0.356514] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.356529] pci 0000:02:00.0: supports D1 D2 [ 0.356556] pci 0000:02:00.1: reg 10 64bit mmio: [0xf0110000-0xf0113fff] [ 0.356585] pci 0000:02:00.1: supports D1 D2 [ 0.356668] pci 0000:00:02.0: bridge io port: [0x1000-0x1fff] [ 0.356670] pci 0000:00:02.0: bridge 32bit mmio: [0xf0100000-0xf01fffff] [ 0.356674] pci 0000:00:02.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.356720] pci 0000:3f:00.0: reg 10 64bit mmio: [0xf0000000-0xf000ffff] [ 0.356730] pci 0000:3f:00.0: reg 18 64bit mmio: [0xf0010000-0xf001ffff] [ 0.356777] pci 0000:3f:00.0: PME# supported from D3hot D3cold [ 0.356780] pci 0000:3f:00.0: PME# disabled [ 0.356873] pci 0000:00:0a.0: bridge 32bit mmio: [0xf0000000-0xf00fffff] [ 0.356927] pci 0000:00:14.4: transparent bridge [ 0.356944] pci_bus 0000:00: on NUMA node 0 [ 0.356946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.357065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT] [ 0.357120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX3._PRT] [ 0.357167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.357275] ACPI Error (dsfield-0140): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 0.357279] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f7414588), AE_ALREADY_EXISTS [ 0.357294] ACPI Warning: \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 20090521 nspredef-328 [ 0.370993] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371055] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371115] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371175] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371235] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371295] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371354] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371414] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. [ 0.371521] SCSI subsystem initialized [ 0.371540] libata version 3.00 loaded. [ 0.371540] usbcore: registered new interface driver usbfs [ 0.371540] usbcore: registered new interface driver hub [ 0.371540] usbcore: registered new device driver usb [ 0.371540] ACPI: WMI: Mapper loaded [ 0.371540] PCI: Using ACPI for IRQ routing [ 0.384006] Bluetooth: Core ver 2.15 [ 0.384015] NET: Registered protocol family 31 [ 0.384015] Bluetooth: HCI device and connection manager initialized [ 0.384015] Bluetooth: HCI socket layer initialized [ 0.384015] NetLabel: Initializing [ 0.384015] NetLabel: domain hash size = 128 [ 0.384015] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.384024] NetLabel: unlabeled traffic allowed by default [ 0.384048] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.384052] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.388014] hpet: hpet2 irq 24 for MSI [ 0.416037] pnp: PnP ACPI init [ 0.416045] ACPI: bus type pnp registered [ 0.417559] pnp: PnP ACPI: found 14 devices [ 0.417561] ACPI: ACPI bus type pnp unregistered [ 0.417563] PnPBIOS: Disabled by ACPI PNP [ 0.417572] system 00:0b: ioport range 0x40b-0x40b has been reserved [ 0.417574] system 00:0b: ioport range 0x4d0-0x4df has been reserved [ 0.417578] system 00:0c: ioport range 0x800-0x87f has been reserved [ 0.417580] system 00:0c: ioport range 0x880-0x88f has been reserved [ 0.417582] system 00:0c: ioport range 0xc00-0xc1f has been reserved [ 0.417584] system 00:0c: ioport range 0xc50-0xc6f has been reserved [ 0.417586] system 00:0c: ioport range 0xcd0-0xcdf has been reserved [ 0.417588] system 00:0c: ioport range 0xf800-0xf87f has been reserved [ 0.417590] system 00:0c: ioport range 0xf880-0xf8ff has been reserved [ 0.417593] system 00:0c: ioport range 0xf900-0xf97f has been reserved [ 0.417595] system 00:0c: ioport range 0xf980-0xf9ff has been reserved [ 0.417597] system 00:0c: ioport range 0xfa00-0xfa7f has been reserved [ 0.417599] system 00:0c: ioport range 0xfa80-0xfaff has been reserved [ 0.417601] system 00:0c: ioport range 0xfc00-0xfc7f has been reserved [ 0.417603] system 00:0c: ioport range 0xfd00-0xfd7f has been reserved [ 0.417605] system 00:0c: ioport range 0xfd80-0xfdff has been reserved [ 0.417609] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.417612] system 00:0d: iomem range 0x100000-0xdfffffff could not be reserved [ 0.417614] system 00:0d: iomem range 0xe4000-0xfffff could not be reserved [ 0.417616] system 00:0d: iomem range 0xfec01000-0xfecfffff has been reserved [ 0.417618] system 00:0d: iomem range 0xfed00400-0xfed3ffff has been reserved [ 0.417621] system 00:0d: iomem range 0xfed45000-0xffffffff has been reserved [ 0.417623] system 00:0d: iomem range 0xf4000000-0xf7ffffff has been reserved [ 0.417625] system 00:0d: iomem range 0xd2400-0xe3fff has been reserved [ 0.452463] AppArmor: AppArmor Filesystem Enabled [ 0.452484] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.452486] pci 0000:00:02.0: IO window: 0x1000-0x1fff [ 0.452489] pci 0000:00:02.0: MEM window: 0xf0100000-0xf01fffff [ 0.452492] pci 0000:00:02.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.452496] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:3f [ 0.452497] pci 0000:00:0a.0: IO window: disabled [ 0.452500] pci 0000:00:0a.0: MEM window: 0xf0000000-0xf00fffff [ 0.452502] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.452505] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0f [ 0.452506] pci 0000:00:14.4: IO window: disabled [ 0.452511] pci 0000:00:14.4: MEM window: disabled [ 0.452514] pci 0000:00:14.4: PREFETCH window: disabled [ 0.452522] alloc irq_desc for 18 on node -1 [ 0.452523] alloc kstat_irqs on node -1 [ 0.452527] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.452530] pci 0000:00:02.0: setting latency timer to 64 [ 0.452533] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.452536] pci 0000:00:0a.0: setting latency timer to 64 [ 0.452542] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.452544] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.452547] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.452549] pci_bus 0000:02: resource 1 mem: [0xf0100000-0xf01fffff] [ 0.452551] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.452553] pci_bus 0000:3f: resource 1 mem: [0xf0000000-0xf00fffff] [ 0.452555] pci_bus 0000:0f: resource 3 io: [0x00-0xffff] [ 0.452557] pci_bus 0000:0f: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.452578] NET: Registered protocol family 2 [ 0.452640] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.452839] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.453209] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.453394] TCP: Hash tables configured (established 131072 bind 65536) [ 0.453396] TCP reno registered [ 0.453445] NET: Registered protocol family 1 [ 0.453480] Trying to unpack rootfs image as initramfs... [ 0.503966] Switched to high resolution mode on CPU 1 [ 0.503970] Switched to high resolution mode on CPU 2 [ 0.503974] Switched to high resolution mode on CPU 3 [ 0.504016] Switched to high resolution mode on CPU 0 [ 0.598200] Freeing initrd memory: 7500k freed [ 0.600309] cpufreq-nforce2: No nForce2 chipset. [ 0.600326] Scanning for low memory corruption every 60 seconds [ 0.600388] audit: initializing netlink socket (disabled) [ 0.600397] type=2000 audit(1273152970.600:1): initialized [ 0.606682] highmem bounce pool size: 64 pages [ 0.606686] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.607667] VFS: Disk quotas dquot_6.5.2 [ 0.607704] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.608051] fuse init (API version 7.12) [ 0.608100] msgmni has been set to 1644 [ 0.608287] alg: No test for stdrng (krng) [ 0.608297] io scheduler noop registered [ 0.608298] io scheduler anticipatory registered [ 0.608300] io scheduler deadline registered [ 0.608328] io scheduler cfq registered (default) [ 0.608393] pci 0000:02:00.0: Boot video device [ 0.608459] alloc irq_desc for 25 on node -1 [ 0.608461] alloc kstat_irqs on node -1 [ 0.608467] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 0.608471] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.608527] alloc irq_desc for 26 on node -1 [ 0.608528] alloc kstat_irqs on node -1 [ 0.608532] pcieport-driver 0000:00:0a.0: irq 26 for MSI/MSI-X [ 0.608536] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 0.608577] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.608593] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.608669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.608672] ACPI: Power Button [PWRF] [ 0.608709] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.608714] ACPI: Power Button [PBTN] [ 0.608909] processor LNXCPU:00: registered as cooling_device0 [ 0.608912] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.609027] processor LNXCPU:01: registered as cooling_device1 [ 0.609031] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.609158] processor LNXCPU:02: registered as cooling_device2 [ 0.609162] ACPI: Processor [CPU2] (supports 8 throttling states) [ 0.609286] processor LNXCPU:03: registered as cooling_device3 [ 0.609290] ACPI: Processor [CPU3] (supports 8 throttling states) [ 0.610389] isapnp: Scanning for PnP cards... [ 0.987909] isapnp: No Plug & Play device found [ 0.988605] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.988717] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.988969] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.989588] brd: module loaded [ 0.989848] loop: module loaded [ 0.989890] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.989930] ahci 0000:00:11.0: version 3.0 [ 0.989985] alloc irq_desc for 22 on node -1 [ 0.989986] alloc kstat_irqs on node -1 [ 0.989991] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.990095] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.990098] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio slum part [ 0.990430] scsi0 : ahci [ 0.990537] scsi1 : ahci [ 0.990577] scsi2 : ahci [ 0.990618] scsi3 : ahci [ 0.990657] scsi4 : ahci [ 0.990697] scsi5 : ahci [ 0.990769] ata1: SATA max UDMA/133 abar m1...@0xf0209000 port 0xf0209100 irq 22 [ 0.990772] ata2: SATA max UDMA/133 abar m1...@0xf0209000 port 0xf0209180 irq 22 [ 0.990775] ata3: SATA max UDMA/133 abar m1...@0xf0209000 port 0xf0209200 irq 22 [ 0.990778] ata4: SATA max UDMA/133 abar m1...@0xf0209000 port 0xf0209280 irq 22 [ 0.990781] ata5: SATA max UDMA/133 abar m1...@0xf0209000 port 0xf0209300 irq 22 [ 0.990784] ata6: SATA max UDMA/133 abar m1...@0xf0209000 port 0xf0209380 irq 22 [ 0.991359] Fixed MDIO Bus: probed [ 0.991380] PPP generic driver version 2.4.2 [ 0.991433] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.991479] alloc irq_desc for 17 on node -1 [ 0.991481] alloc kstat_irqs on node -1 [ 0.991484] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.991492] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.991510] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.991539] ehci_hcd 0000:00:12.2: debug port 1 [ 0.991551] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0209400 [ 1.000060] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.000103] usb usb1: configuration #1 chosen from 1 choice [ 1.000121] hub 1-0:1.0: USB hub found [ 1.000126] hub 1-0:1.0: 6 ports detected [ 1.000185] alloc irq_desc for 19 on node -1 [ 1.000186] alloc kstat_irqs on node -1 [ 1.000189] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.000195] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.000211] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.000236] ehci_hcd 0000:00:13.2: debug port 1 [ 1.000247] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0209500 [ 1.012056] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.012090] usb usb2: configuration #1 chosen from 1 choice [ 1.012105] hub 2-0:1.0: USB hub found [ 1.012109] hub 2-0:1.0: 6 ports detected [ 1.012184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.012192] alloc irq_desc for 16 on node -1 [ 1.012193] alloc kstat_irqs on node -1 [ 1.012196] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.012203] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.012220] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.012237] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0204000 [ 1.072063] usb usb3: configuration #1 chosen from 1 choice [ 1.072079] hub 3-0:1.0: USB hub found [ 1.072085] hub 3-0:1.0: 3 ports detected [ 1.072115] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.072121] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.072137] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.072149] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0205000 [ 1.128078] usb usb4: configuration #1 chosen from 1 choice [ 1.128094] hub 4-0:1.0: USB hub found [ 1.128100] hub 4-0:1.0: 3 ports detected [ 1.128130] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.128136] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.128154] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.128171] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0206000 [ 1.184082] usb usb5: configuration #1 chosen from 1 choice [ 1.184097] hub 5-0:1.0: USB hub found [ 1.184103] hub 5-0:1.0: 3 ports detected [ 1.184132] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.184138] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.184154] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.184166] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0207000 [ 1.240082] usb usb6: configuration #1 chosen from 1 choice [ 1.240098] hub 6-0:1.0: USB hub found [ 1.240104] hub 6-0:1.0: 3 ports detected [ 1.240134] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.240140] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.240156] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.240168] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0208000 [ 1.296082] usb usb7: configuration #1 chosen from 1 choice [ 1.296096] hub 7-0:1.0: USB hub found [ 1.296103] hub 7-0:1.0: 2 ports detected [ 1.296132] uhci_hcd: USB Universal Host Controller Interface driver [ 1.296179] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.298769] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.298772] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.298813] mice: PS/2 mouse device common for all mice [ 1.298876] rtc_cmos 00:03: RTC can wake from S4 [ 1.298898] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.298920] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.298983] device-mapper: uevent: version 1.0.3 [ 1.299056] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 1.299174] device-mapper: multipath: version 1.1.0 loaded [ 1.299176] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.299260] EISA: Probing bus 0 at eisa.0 [ 1.299309] Cannot allocate resource for EISA slot 1 [ 1.299333] EISA: Detected 0 cards. [ 1.299503] cpuidle: using governor ladder [ 1.299505] cpuidle: using governor menu [ 1.299823] TCP cubic registered [ 1.299919] NET: Registered protocol family 10 [ 1.300212] lo: Disabled Privacy Extensions [ 1.300432] NET: Registered protocol family 17 [ 1.300442] Bluetooth: L2CAP ver 2.13 [ 1.300443] Bluetooth: L2CAP socket layer initialized [ 1.300445] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.300446] Bluetooth: SCO socket layer initialized [ 1.300529] Bluetooth: RFCOMM TTY layer initialized [ 1.300531] Bluetooth: RFCOMM socket layer initialized [ 1.300532] Bluetooth: RFCOMM ver 1.11 [ 1.300551] powernow-k8: Found 1 AMD Phenom(tm) II X4 B93 Processor processors (4 cpu cores) (version 2.20.00) [ 1.300575] powernow-k8: 0 : pstate 0 (2800 MHz) [ 1.300577] powernow-k8: 1 : pstate 1 (2100 MHz) [ 1.300578] powernow-k8: 2 : pstate 2 (1600 MHz) [ 1.300580] powernow-k8: 3 : pstate 3 (800 MHz) [ 1.300784] Using IPI No-Shortcut mode [ 1.300819] PM: Resume from disk failed. [ 1.300825] registered taskstats version 1 [ 1.300894] Magic number: 10:402:634 [ 1.300906] pci_express 0000:00:0a.0:pcie08: hash matches [ 1.300981] rtc_cmos 00:03: setting system clock to 2010-05-06 13:36:11 UTC (1273152971) [ 1.300983] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.300984] EDD information not available. [ 1.308097] ata5: SATA link down (SStatus 0 SControl 300) [ 1.308107] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.308137] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.308143] ata4: SATA link down (SStatus 0 SControl 300) [ 1.308165] ata6: SATA link down (SStatus 0 SControl 300) [ 1.308189] ata3: SATA link down (SStatus 0 SControl 300) [ 1.309055] ata1.00: ACPI _SDD failed (AE 0x5) [ 1.310286] ata2.00: ACPI _SDD failed (AE 0x5) [ 1.318940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 6.628100] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.628103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.629064] ata1.00: ACPI _SDD failed (AE 0x5) [ 6.629067] ata1.00: ACPI: failed the second time, disabled [ 6.629071] ata1.00: ATA-8: ST3500418AS, HP34, max UDMA/100 [ 6.629073] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.630252] ata1.00: configured for UDMA/100 [ 6.630266] ata2.00: ACPI _SDD failed (AE 0x5) [ 6.630267] ata2.00: ACPI: failed the second time, disabled [ 6.630318] scsi 0:0:0:0: Direct-Access ATA ST3500418AS HP34 PQ: 0 ANSI: 5 [ 6.630390] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.630418] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 6.630442] sd 0:0:0:0: [sda] Write Protect is off [ 6.630443] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.630456] ata2.00: ATAPI: hp DDVDW TS-H653R, 0E00, max UDMA/100, ATAPI AN [ 6.630458] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.630525] sda: [ 6.633126] ata2.00: configured for UDMA/100 [ 6.634073] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-H653R 0E00 PQ: 0 ANSI: 5 [ 6.639048] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.639050] Uniform CD-ROM driver Revision: 3.20 [ 6.639097] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.639123] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 6.646238] sda1 sda2 sda3 < sda5 sda6 > [ 6.686632] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.686645] Freeing unused kernel memory: 560k freed [ 6.686830] Write protecting the kernel text: 4664k [ 6.686880] Write protecting the kernel read-only data: 1860k [ 6.775118] tg3.c:v3.99 (April 20, 2009) [ 6.775132] tg3 0000:3f:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.775139] tg3 0000:3f:00.0: setting latency timer to 64 [ 6.781652] tg3 0000:3f:00.0: PME# disabled [ 6.784766] Linux agpgart interface v0.103 [ 6.793894] eth0: Tigon3 [partno(BCM95761) rev 5761100] (PCI Express) MAC address 18:a9:05:21:a5:4c [ 6.793897] eth0: attached PHY is 5761 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 6.793899] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 6.793901] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 6.796609] [drm] Initialized drm 1.1.0 20060810 [ 6.807268] [drm] radeon default to kernel modesetting DISABLED. [ 6.807644] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.807648] pci 0000:02:00.0: setting latency timer to 64 [ 6.807721] [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 0 [ 7.524992] PM: Starting manual resume from disk [ 7.524995] PM: Resume from partition 8:2 [ 7.524997] PM: Checking hibernation image. [ 7.525234] PM: Resume from disk failed. [ 7.541155] EXT4-fs (sda1): barriers enabled [ 7.547279] kjournald2 starting: pid 407, dev sda1:8, commit interval 5 seconds [ 7.547346] EXT4-fs (sda1): delayed allocation enabled [ 7.547349] EXT4-fs: file extents enabled [ 7.550107] EXT4-fs: mballoc enabled [ 7.550116] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.974020] type=1505 audit(1273152978.172:2): operation="profile_load" pid=434 name=/usr/share/gdm/guest-session/Xsession [ 7.976107] type=1505 audit(1273152978.172:3): operation="profile_load" pid=435 name=/sbin/dhclient3 [ 7.976313] type=1505 audit(1273152978.172:4): operation="profile_load" pid=435 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.976427] type=1505 audit(1273152978.172:5): operation="profile_load" pid=435 name=/usr/lib/connman/scripts/dhclient-script [ 8.003961] type=1505 audit(1273152978.199:6): operation="profile_load" pid=436 name=/usr/bin/evince [ 8.007238] type=1505 audit(1273152978.204:7): operation="profile_load" pid=436 name=/usr/bin/evince-previewer [ 8.009197] type=1505 audit(1273152978.204:8): operation="profile_load" pid=436 name=/usr/bin/evince-thumbnailer [ 8.023054] type=1505 audit(1273152978.220:9): operation="profile_load" pid=438 name=/usr/lib/cups/backend/cups-pdf [ 8.023302] type=1505 audit(1273152978.220:10): operation="profile_load" pid=438 name=/usr/sbin/cupsd [ 8.024902] type=1505 audit(1273152978.220:11): operation="profile_load" pid=439 name=/usr/sbin/tcpdump [ 13.031918] udev: starting version 147 [ 13.039672] Adding 4200988k swap on /dev/sda2. Priority:-1 extents:1 across:4200988k [ 13.130320] tpm_inf_pnp 00:09: Found TPM with ID IFX0102 [ 13.130400] tpm_inf_pnp 00:09: TPM found: config base 0x4e, data base 0x480, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 13.182807] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.216601] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0 [ 13.235169] lp: driver loaded but no devices found [ 13.406373] psmouse serio1: ID: 10 00 64 [ 13.492977] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.569042] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS... [ 13.569941] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4 [ 13.572121] HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.572137] HDA Intel 0000:02:00.1: setting latency timer to 64 [ 13.617889] EXT4-fs (sda1): internal journal on sda1:8 [ 13.991229] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 14.378295] EXT4-fs (sda5): barriers enabled [ 14.378997] kjournald2 starting: pid 826, dev sda5:8, commit interval 5 seconds [ 14.380150] EXT4-fs (sda5): internal journal on sda5:8 [ 14.380152] EXT4-fs (sda5): delayed allocation enabled [ 14.380155] EXT4-fs: file extents enabled [ 14.394995] EXT4-fs: mballoc enabled [ 14.395005] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 14.510121] type=1505 audit(1273163784.708:12): operation="profile_replace" pid=1000 name=/usr/share/gdm/guest-session/Xsession [ 14.511112] type=1505 audit(1273163784.708:13): operation="profile_replace" pid=1002 name=/sbin/dhclient3 [ 14.511319] type=1505 audit(1273163784.708:14): operation="profile_replace" pid=1002 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 14.511434] type=1505 audit(1273163784.708:15): operation="profile_replace" pid=1002 name=/usr/lib/connman/scripts/dhclient-script [ 14.513592] type=1505 audit(1273163784.712:16): operation="profile_replace" pid=1003 name=/usr/bin/evince [ 14.516854] type=1505 audit(1273163784.712:17): operation="profile_replace" pid=1003 name=/usr/bin/evince-previewer [ 14.518845] type=1505 audit(1273163784.716:18): operation="profile_replace" pid=1003 name=/usr/bin/evince-thumbnailer [ 14.521276] tg3 0000:3f:00.0: PME# disabled [ 14.521332] alloc irq_desc for 27 on node -1 [ 14.521334] alloc kstat_irqs on node -1 [ 14.521344] tg3 0000:3f:00.0: irq 27 for MSI/MSI-X [ 14.546109] EXT4-fs (sda6): barriers enabled [ 14.546961] kjournald2 starting: pid 1005, dev sda6:8, commit interval 5 seconds [ 14.547275] EXT4-fs (sda6): internal journal on sda6:8 [ 14.547277] EXT4-fs (sda6): delayed allocation enabled [ 14.547280] EXT4-fs: file extents enabled [ 14.572916] EXT4-fs: mballoc enabled [ 14.572927] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 14.584355] type=1505 audit(1273163784.780:19): operation="profile_replace" pid=1011 name=/usr/lib/cups/backend/cups-pdf [ 14.584607] type=1505 audit(1273163784.780:20): operation="profile_replace" pid=1011 name=/usr/sbin/cupsd [ 14.585737] type=1505 audit(1273163784.784:21): operation="profile_replace" pid=1015 name=/usr/sbin/tcpdump [ 15.244282] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.401590] ppdev: user-space parallel port driver [ 15.448402] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 15.448439] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 15.785915] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 15.785951] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 15.785975] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 15.805074] [drm] Setting GART location based on new memory map [ 15.820356] [drm] Loading RV730/RV740 PFP Microcode [ 15.820366] [drm] Loading RV730/RV740 CP Microcode [ 15.835277] [drm] Resetting GPU [ 15.835333] [drm] writeback test succeeded in 1 usecs [ 16.811302] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 16.811305] tg3: eth0: Flow control is off for TX and off for RX. [ 16.813645] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.396517] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 27.732017] eth0: no IPv6 routers present