something in the gpe handler screwing up. please tar up the output of acpidump -o hplaptop and send that to me
On Sat, Jun 12, 2010 at 11:06:27AM -0700, TimH wrote: > I just got a semi-new HP laptop and it fails to boot unless I disable > acpi. This isn't a big deal in itself, but it seems that it doesn't > use both cores of the CPU when this is done. Is this normal? > > It's an HP ProBook 4510s if that's at all interesting... > > Included are the dmesg from when it fails to boot including trace and > ps data (all typed by hand, so I hope it helps! =) and a dmesg with acpi > disabled. > > [ using 707600 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights > reserved. Copyright (c) 1995-2010 OpenBSD. All rights reserved. > http://www.OpenBSD.org > > OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17 20:55:07 MDT 2010 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > RTC BIOS diagnostic error > 7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> cpu0: > Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class) > 2.10 GHz cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > real mem = 2072080384 (1976MB) avail mem = 1998913536 (1906MB) RTC > BIOS diagnostic error > 7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> mainbus0 > at root bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4 > @ 0x7bac3000 (21 entries) bios0: vendor Hewlett-Packard version "68PZI > Ver. F.0F" date 10/20/2009 bios0: Hewlett-Packard HP ProBook 4510s > acpi0 at bios0: rev 2 acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT > SLIC SSDT SSDT SSDT acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) > WNIC(S5) RP03(S5) ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) > USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHCI(S3) EHC2(S3) > PCIB(S5) HST1)S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at > acpi0: 14318179 Hz acpimadt0 at acpi0 addr0xfee00000: PC-AT compat cpu0 > at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" > 686-class) 2.10 GHz cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: > misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus -1 > (PEGP) acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 3 (RP03) > acpiprt4 at acpi0: bus 68 (RP05) > acpiprt5 at acpi0: bus 133 (RP06) > acpiprt6 at acpi0: bus 134 (PCIB) > acpiprt7 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: APPR > acpipwrres1 at acpi0: COMP > acpipwrres2 at acpi0: LPP_ > acpipwrres3 at acpi0: PFN6 > acpipwrres4 at acpi0: PFN7 > acpipwrres5 at acpi0: PFN8 > acpipwrres6 at acpi0: PFN9 > acpipwrres7 at acpi0: PFNA > acpipwrres8 at acpi0: PFNB > acpipwrres9 at acpi0: PGF0 > acpitz0 at acpi0: critical temperature 108 degC > acpipwrres10 at acpi0: PFN0 > acpipwrres11 at acpi0: PFN1 > acpipwrres12 at acpi0: PFN2 > acpipwrres13 at acpi0: PFN3 > acpipwrres14 at acpi0: PFN4 > acpipwrres15 at acpi0: PFN5 > acpitz1 at acpi0: critical temperature 105 degC > acpitz2 at acpi0: critical temperature 108 degC > acpitz3 at acpi0: critical temperature 105 degC > acpitz4 at acpi0: critical temperature 108 degC > acpitz5 at acpi0acpitz5: FDTZ: failed to read _TMP > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit offline > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > acpivideo0 at acpi0: DGFX > acpivout0 at acpivideo0: LCD_ > acpivout1 at acpivideo0: CRT_ > acpivout2 at acpivideo0: TV_ > acpivout3 at acpivideo0: DVI_ > acpivout4 at acpivideo0: DD04 > acpivideo1 at acpi0: GFX0 > acpivout5 at acpivideo1: DD02 > bios0: ROM list: 0xc0000/0xfe00! 0xd0000/0x1000 0xd1000/0x10000 > cpu0: Enhanced SpeedStep 2095 MHz: speeds: 2101, 2100, 1600, 1200 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0x80000000, size 0x10000000 > inteldrm0 at vga1: apic 1 int 16 (irq 10) > drm0 at inteldrm0 > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB rev 0x03: apic 1 int > 16 (irq 10) uhci1 at pci0 dev 26 function 1 "Intel 82801I USB rev 0x03: > apic 1 int 17 (irq 11) uhci2 at pci0 dev 26 function 2 "Intel 82801I > USB rev 0x03: apic 1 int 18 (irq 10) ehci0 at pci0 dev 26 function 7 > "Intel 82801I USB rev 0x03: apic 1 int 19 (irq 10) usb0 at ehci0: USB > revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia 0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: > apic 1 int 17 (irq 11) azalia0: codecs: Analog Devices AD1984A, > Intel/0x2802, using Analog Devices AD1984A audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int > 16 (irq 10) pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int > 17 (irq 11) pci2 at ppb1 bus 2 > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: apic 1 > int 17 (irq 11), MIMO 1T2R, MoW, address 00:26:c6:0d:99:44 ppb2 at pci0 > dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (itq 10) > pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" > rev 0x03: apic 1 int 16 (irq 10) pci4 at ppb3 bus 68 > ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: apic 1 int > 17 (irq 11) pci5 at ppb4 bus 133 > mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10, > Yukon-2 Extreme rev. B0 (0x2): apic 1 int 17 (irq 11) msk0 at mskc0 > port A: address 18:a9:05:cf:b6:67 eephy0 at msk0 phy 0: 88E1149 Gigabit > PHY, rev. 1 uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev > 0x03: apic 1 int 20 (irq 10) uhci4 at pci0 dev 29 function 1 "Intel > 82801I USB" rev 0x03: apic 1 int 22 (irq 10) uhci5 at pci0 dev 29 > function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 10) ehci1 at > pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq > 10) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" > rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM > Hub-to-PCI" rev 0x93 pci6 at ppb5 bus 134 > pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 > int 21 (irq 10), AHCI 1.2 scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, 0006> SCSI3 0/direct > fixed sd0: 238475MB, 512 bytes/sec, 488397168 sec total > cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT20L, DC05> ATAPI 5/cdrom > removable usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdiaplsy0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcpp0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > copyvalue: efff0021Store to default type! efff0021 > > 88f5 Called: \_SB_.PCI0.LPCB.EC0_.RPPC > local0: 0xd2b741c4 cnt:01 stk:60 integer: 2 > local1: 0xd2b77f04 cnt:01 stk:61 integer: 0 > local2: 0xd2b78dc4 cnt:02 stk:62 objref: 0xd2b8c1c4 index:0 > opcode:CondRef uvm_fault(0xd08bc880, 0xefffe000, 0, 1) -> d > kernel: page fault trap, code=0 > Stopped at aml_nodename+0x1b: pushl 0(%ebx) > ddb{0}> trace > aml_nodename(efffeecc, d2b8c1c4,0,d08d3d00,d08721b8) at > aml_nodename+0x1b aml_showvalue(d2b70144,0,d08d3d21,de2f6d0c) at > aml_showvalue+0x2dd _aml_die(d0863015,a62,d0863020,efff0021,d2b7a8c4) > at _aml_die+0xf0 aml_xstore(d2b7a8c4,d2b89404,0,0,d2b55a44) at > aml_xstore+0x1c2 aml_xparse(d2b7a8c4, 54,d0863256d2b55a04,d2b65744) at > aml_xparse+0x5dd aml_xeval(d2b65744,d2b55a04,54,0,0) at aml_xeval+0x15c > aml_xparse(d2b65744,54,d0863256,d2b55884,de2f6ec4) at aml_xparse+0x515 > aml_xeval(0,d2b55884,74,0,0,1,de2f6f0c,d0702081) at aml_xeval+0x15c > aml_evalnode(d2b03c00,d2b558c4,0,0,0,62,0,d0702531) at aml_evalnode+0x57 > acpiec_sci_event(d2b07000,420,2,40) at acpiec_sci_event+0x74 > acpiec_gpehandler(d2b03c00,16,d2b07000,1) at acpiec_gpehandler+0x87 > acpi_isr_thread(d2b6d8c0) at acpi_isr_thread+0x176 > Bad frame pointer: 0xd0a43e88 > ddb{0}> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND > 16 0 0 0 3 0x2100200 pftm pfpurge > 15 0 0 0 3 0x2100200 config usb7 > 14 0 0 0 3 0x2100200 config usb6 > 13 0 0 0 3 0x2100200 config usb5 > 12 0 0 0 3 0x2100200 config usb4 > 11 0 0 0 3 0x2100200 config usb3 > 10 0 0 0 3 0x2100200 config usb2 > 9 0 0 0 3 0x2100200 usbdly usb1 > 8 0 0 0 3 0x2100200 usbtsk usbtask > 7 0 0 0 3 0x2100200 usbdly usb0 > * 6 0 0 0 7 0x2100200 acpi0 > 5 0 0 0 3 0x40100200 idle1 > 4 0 0 0 3 0x2100200 bored syswq > 3 0 0 0 3 0x40100200 idle0 > 2 0 0 0 3 0x2100200 kmalloc kmthread > 1 0 0 0 3 0x2100200 initexec swapper > 0 0 0 0 3 0x2100200 cfpend swapper > ddb{0}> > > > DMESG with acpi disabled: > > > OpenBSD 4.7 (GENERIC.MP) #449: Wed Mar 17 20:55:07 MDT 2010 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > RTC BIOS diagnostic error > 7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> cpu0: > Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz ("GenuineIntel" 686-class) > 2.10 GHz cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR > real mem = 2072080384 (1976MB) avail mem = 1998913536 (1906MB) RTC > BIOS diagnostic error > 7f<ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time> mainbus0 > at root bios0 at mainbus0: AT/286+ BIOS, date 09/15/09, SMBIOS rev. 2.4 > @ 0x7bac3000 (21 entries) bios0: vendor Hewlett-Packard version "68PZI > Ver. F.0F" date 10/20/2009 bios0: Hewlett-Packard HP ProBook 4510s acpi > at bios0 function 0x0 not configured pcibios at bios0 function 0x1a not > configured bios0: ROM list: 0xc0000/0xfe00! 0xd0000/0x1000 > 0xd1000/0x1000 cpu0 at mainbus0: (uniprocessor) > cpu0: unknown Enhanced SpeedStep CPU, msr 0x06114a2306004a23 > cpu0: using only highest and lowest power states > cpu0: Enhanced SpeedStep 2095 MHz: speeds: 14800, 1200 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > intagp0 at vga1 > agp0 at intagp0: aperture at 0x80000000, size 0x10000000 > inteldrm0 at vga1: irq 10 > drm0 at inteldrm0 > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: irq 10 > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: irq 11 > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: irq 10 > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: irq > 11 azalia0: codecs: Analog Devices AD1984A, Intel/0x2802, using Analog > Devices AD1984A audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: irq 10 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: irq 11 > pci2 at ppb1 bus 2 > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: irq 11, > MIMO 1T2R, MoW, address 00:26:c6:0d:99:44 ppb2 at pci0 dev 28 function > 2 "Intel 82801I PCIE" rev 0x03: irq 10 pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: irq 10 > pci4 at ppb3 bus 68 > ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: irq 11 > pci5 at ppb4 bus 133 > mskc0 at pci5 dev 0 function 0 "Marvell Yukon 88E8072" rev 0x10, > Yukon-2 Extreme rev. B0 (0x2): irq 11 msk0 at mskc0 port A: address > 18:a9:05:cf:b6:67 eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1 > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: irq 10 > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: irq 10 > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: irq 10 > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: irq 10 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93 > pci6 at ppb5 bus 134 > pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03 > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: irq 10, > AHCI 1.2 scsibus0 at ahci0: 32 targets > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9250410AS, 0006> SCSI3 0/direct > fixed sd0: 238475MB, 512 bytes/sec, 488397168 sec total > cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT20L, DC05> ATAPI 5/cdrom > removable usb2 at uhci0: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci1: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci2: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci3: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci4: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb7 at uhci5: USB revision 1.0 > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > midi0 at pcppi0: <PC speaker> > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > biomask effd netmask effd ttymask ffff > mtrr: Pentium Pro MTRR support > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > root on sd0a swap on sd0b dump on sd0b > > > > --TimH
