Tomas Bodzar <tomas.bod...@gmail.com> wrote:
> If you try to setup that interface with ifconfig and debug option is
> there some helpful error description during log in to some network?
Well, "ifconfig zyd0 nwid bedova debug" produces no output at all.
"dhclient zyd0" produces just "zyd0: no link ............. sleeping".
"ifconfig zyd0" right after "" prints:
# ifconfig zyd0
zyd0: flags=8847<UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1d:60:62:59:ef
priority: 4
groups: wlan
media: IEEE802.11 autoselect (OFDM36 mode 11g)
status: no network
ieee80211: nwid bedova chan 9 bssid 00:23:54:71:50:71 32dB 100dBm
inet6 fe80::21d:60ff:fe62:59ef%zyd0 prefixlen 64 scopeid 0x4
but after a couple of minutes it degrades to:
# ifconfig zyd0
zyd0: flags=8847<UP,BROADCAST,DEBUG,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1d:60:62:59:ef
priority: 4
groups: wlan
media: IEEE802.11 autoselect (DS1)
status: no network
ieee80211: nwid bedova 100dBm
inet6 fe80::21d:60ff:fe62:59ef%zyd0 prefixlen 64 scopeid 0x4
At the same time, machine I'm typing this all on, standing a bit further from
APN, tells higher signal level:
d...@ao531h:/home/ddc % ifconfig iwn0
iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:eb:0e:7d:62
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect (OFDM54 mode 11g)
status: active
ieee80211: nwid bedova chan 9 bssid 00:23:54:71:50:71 226dB
inet6 fe80::216:ebff:fe0e:7d62%iwn0 prefixlen 64 scopeid 0x2
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
So, is there anything I can do about my zyd device? Or any furether info?
usbdevs and dmesg:
# usbdevs -vda 3 -f /dev/usb0
Controller /dev/usb0:
addr 3: high speed, power 500 mA, config 1, USB2.0 WLAN(0x171b), ASUS(0x0b05),
rev 48.02
B zyd0
# dmesg
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
B B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.00GHz ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem B = 1324707840 (1263MB)
avail mem = 1274814464 (1215MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/16/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.3 @ 0xf92f0 (36 entries)
bios0: vendor American Megatrends Inc. version "208" date 10/16/2007
bios0: ASUSTeK Computer Inc. R2H
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET SSDT
acpi0: wakeup devices LAN0(S4) P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
EUSB(S3) MC97(S4) AZAL(S3) PWRB(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 1 (P0P1)
acpiprt3 at acpi0: bus 2 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus -1 (P0P6)
acpiprt6 at acpi0: bus -1 (P0P7)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 105 degC
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "R2-2134" serial B type LIon oem "ASUSTEK"
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRTD
acpivout1 at acpivideo0: TVOD
acpivout2 at acpivideo0: LCDD
acpivideo1 at acpi0: VGA_
acpivout3 at acpivideo1: CRTD
acpivout4 at acpivideo1: TVOD
acpivout5 at acpivideo1: LCDD
bios0: ROM list: 0xc0000/0xea00!
cpu0: Enhanced SpeedStep 1078 MHz: speeds: 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: apic 1 int
16 (irq 11)
azalia0: codecs: Analog Devices/0x1986
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
(irq 11)
pci1 at ppb0 bus 2
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E (0x3400), apic
1 int 16 (irq 11), address 00:1d:60:38:96:0e
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
(irq 6)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
(irq 3)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci2 at ppb1 bus 1
sdhc0 at pci2 dev 1 function 0 "Ricoh 5C822 SD/MMC" rev 0x19: apic 1 int 17
(irq 3)
sdmmc0 at sdhc0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8009GAH>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub0 port 1 "Syntek USB2.0" rev 2.00/0.05 addr 2
zyd0 at uhub0 port 6 configuration 1 interface 0 "ASUS USB2.0 WLAN" rev
2.00/48.02 addr 3
uhub5 at uhub0 port 7 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr
4
ugen1 at uhub5 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/c.10 addr 5
uhidev0 at uhub5 port 2 configuration 1 interface 0 "PANJIT PANJIT TouchSet
Digitizer" rev 1.10/1.03 addr 6
uhidev0: iclass 3/0, 2 report ids
uhts0 at uhidev0 reportid 1
wsmouse1 at uhts0 mux 0
ums0 at uhidev0 reportid 2: 0 button
wsmouse2 at ums0 mux 0
ubt0 at uhub4 port 2 "ASUS product 0x1712" rev 2.00/19.15 addr 2
uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
zyd0: HMAC ZD1211B, FW 47.25, RF AL2230, PA 0, address 00:1d:60:62:59:ef
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
uhid0 detached
uhid1 detached
uhidev2 detached
uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
uhid0 detached
uhid1 detached
uhidev2 detached
uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
--
Dmitrij D. Czarkoff
