Hello All,
I am new to this list and OpenBSD. I installed OpenBSD 4.7 i386 from CD
and FTP. First I overseen Sorftraid, so I used CCD to mirror my hard
disks. After short use of the fresh installation I got a Segmentation
Fault in more and less. Badly I did not use gdb at this point, because
I assumed a failure on my side during installation or on my hardware.
Then very early I removed all and start again with Softraid. After a
few reboots, I was only getting familiar with OpenBSD and did some
little configuration work, sshd was not starting anymore. Again I got
Segmentation Fault, this time from sshd and ssh. Now I used gdb, and it
was telling me about some problem with libcrypto.so.18.0, my bad I did
not keep this file, I directly overwrote it with the lib from my backup
, which I needed to create the Softraid. After this sshd and ssh was
working normal again.
I checked my disks and my ram, they are fine. I am just waiting for the
next Seg fault... I compiled nothing, I just created some users,
configured X and xdm. I guess it could be a problem with my sata
controller and the kernel, because both CCD and Softraid failed. The
only thing I observed was that this problem was always direct after
booting, it never occur during the system was running. Also I never had
a problem when I was using a single disk, but this was just a short
time during installation.
Thank you for all hints and help.
Andreas
# dmesg
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: mobile AMD Athlon(tm) XP 3200+ ("AuthenticAMD" 686-class, 512KB L2
cache) 2.21 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073246208 (1023MB)
avail mem = 1031172096 (983MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/07/06, BIOS32 rev. 0 @ 0xfda50,
SMBIOS rev. 2.3 @ 0xf0630 (29 entries)
bios0: vendor American Megatrends Inc. version "P1.80" date 08/07/2006
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC
acpi0: wakeup devices UAR1(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4)
EHCI(S4) USBD(S4) PS2M(S4) PS2K(S4) AC9_(S4) MC9_(S4) ILAN(S4) PCI0(S4)
SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 400MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpipwrres0 at acpi0: URP1
acpipwrres1 at acpi0: URP2
acpipwrres2 at acpi0: FDDP
acpipwrres3 at acpi0: LPTP
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xf000! 0xcf000/0x4400! 0xd3800/0x4800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8377 PCI" rev 0x80
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe0000000, size 0xf000000
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 6600 GT AGP" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 10 function 0 "CMD Technology SiI3114 SATA" rev
0x02: DMA
pciide0: using apic 2 int 18 (irq 3) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD401LJ>
wd0: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 7
pciide0: port 1: device present, speed: 1.5Gb/s
wd1 at pciide0 channel 1 drive 0: <SAMSUNG HD401LJ>
wd1: 16-sector PIO, LBA48, 381554MB, 781422768 sectors
wd1(pciide0:1:0): using BIOS timings, Ultra-DMA mode 7
emu0 at pci0 dev 12 function 0 "Creative Labs SoundBlaster Live" rev
0x05: apic 2 int 16 (irq 11)
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x05 at pci0 dev 12 function 1
not configured
pciide1 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide1: using apic 2 int 20 (irq 10) for native-PCI interrupt
wd2 at pciide1 channel 0 drive 0: <SAMSUNG HD080HJ/P>
wd2: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd2(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd3 at pciide1 channel 1 drive 0: <SAMSUNG HD080HJ/P>
wd3: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd3(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
pciide2 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
pciide2: channel 0 disabled (no drives)
atapiscsi0 at pciide2 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW SH-S162A, TS01> ATAPI
5/cdrom removable
cd0(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 11)
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 11)
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 10)
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 10)
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
(irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC3200CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC3200CL2.5
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: apic 2 int 23
(irq 11), address 00:13:8f:06:e8:3f
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI
0x004063, model 0x0032
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83697HF rev 0x12
lm1 at wbsio0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
softraid0: trying to bring up sd0 degraded
scsibus2 at softraid0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <OPENBSD, SR RAID 1, 003> SCSI2 0/direct fixed
sd0: 103437MB, 512 bytes/sec, 211840374 sec total
softraid0: roaming device -> wd1d
root on wd0a swap on wd0b dump on wd0b
