I updated the pmon paths. It autoboots. It autoboots the kernel. But then it prompts me for two devices (swap and I guess root fs). How do I remove those prompts?
same: $ dmesg | grep ral ral0 at pci0 dev 13 function 0 "Ralink RT2561S" rev 0x00: irq 6, address 00:0e:8e:1e:ef:d0 ral0: MAC/BBP RT2561C, RF RT2527 Thanks, - Jay ---------------------------------------- > Date: Sun, 25 Jul 2010 17:54:41 +0000 > From: m...@online.fr > To: jay.kr...@cornell.edu > CC: misc@openbsd.org > Subject: Re: trouble autobooting loongson on gdium? > > > > Does it work after the installation? The installation media is supposed > > > > I don't think so. > > The device is recognized. > > ifconfig reports stuff. > > I think I even got a DHCP address, but can't ping anything. > > Hmm... did the particular wireless chip change on recent models? On the > gdium here it attaches as: > > ral0 at pci0 dev 13 function 0 "Ralink RT2561S" rev 0x00: irq 6, address 00:0e:8e:1f:03:3a > ral0: MAC/BBP RT2561C, RF RT2527 > > ...and I can connect to the neighbour's access point with a simple > ``dhclient ral0''. > > > > This is vecause you copied boot, bsd and bsd.rd to the root of the > > > > Aha. And "boot" varies, per configuration? The one I put there might not be correct? > > No, `boot' is the same for all supported loongson systems. But if you > copy it to the root of the ext2fs partition, you can't create a > directory of the same name. > > I.e. your partition contains > /boot > /bsd > while the installer and the documentation expect > /boot/ > /boot/boot > /boot/bsd > but your layout is fine as long as you update the PMON paths to not have > the `boot/' subdirectory in them. > > Miod
