Hello!
I'm trying to connect a wireless network on my ASUS R2Hv. Both the built-in
and usb dongle wireless adapters are zyd-based:
Asus WL-159g (built-in):
$ usbdevs -vdf /dev/usb0 -a 3
Controller /dev/usb0:
addr 3: high speed, power 500 mA, config 1, USB2.0 WLAN(0x171b), ASUS(0x0b05),
rev 48.02
zyd0
3COM 3CRUSB10075 (usb dongle):
$ usbdevs -vdf /dev/usb0 -a 7
Controller /dev/usb0:
addr 7: high speed, power 500 mA, config 1, USB2.0 WLAN(0x1215),
ZyDAS(0x0ace), rev 48.10
zyd1
zyd(4) mensions both as supported. They both attach as zyd0 and zyd1
respectively. Scanning on them succeeds with my network being found, but
connecting to it gives troubles:
$ sudo ifconfig zyd0 scan
zyd0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1d:60:62:59:ef
priority: 4
groups: wlan
media: IEEE802.11 autoselect (DS1 mode 11g)
status: no network
ieee80211: nwid "" 100dBm
nwid bedova chan 11 bssid 00:23:54:71:50:71 26dB 54M
short_preamble,short_slottime
$ sudo ifconfig zyd0 nwid bedova
$ sudo ifconfig zyd0
zyd0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:1d:60:62:59:ef
priority: 4
groups: wlan
media: IEEE802.11 autoselect (DS1 mode 11g)
status: no network
ieee80211: nwid bedova 100dBm
inet6 fe80::21d:60ff:fe62:59ef%zyd0 prefixlen 64 scopeid 0x4
$ sudo dhclient zyd0
zyd0: no link ............. sleeping
What can I do to further investigate the problem?
OpenBSD 4.8-beta (GENERIC) #43: Sun Jul 25 10:07:23 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.00GHz ("GenuineIntel" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1324707840 (1263MB)
avail mem = 1293062144 (1233MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/16/07, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.3 @ 0xf92f0 (36 entries)
bios0: vendor American Megatrends Inc. version "208" date 10/16/2007
bios0: ASUSTeK Computer Inc. R2H
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET SSDT
acpi0: wakeup devices LAN0(S4) P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
EUSB(S3) MC97(S4) AZAL(S3) PWRB(S4) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 1 (P0P1)
acpiprt3 at acpi0: bus 2 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P5)
acpiprt5 at acpi0: bus -1 (P0P6)
acpiprt6 at acpi0: bus -1 (P0P7)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 105 degC
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "R2-2134" serial type LIon oem "ASUSTEK"
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: CRTD
acpivout1 at acpivideo0: TVOD
acpivout2 at acpivideo0: LCDD
acpivideo1 at acpi0: VGA_
acpivout3 at acpivideo1: CRTD
acpivout4 at acpivideo1: TVOD
acpivout5 at acpivideo1: LCDD
bios0: ROM list: 0xc0000/0xea00!
cpu0: Enhanced SpeedStep 1078 MHz: speeds: 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: apic 1 int
16 (irq 11)
azalia0: codecs: Analog Devices/0x1986
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
(irq 11)
pci1 at ppb0 bus 2
re0 at pci1 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E (0x3400), apic
1 int 16 (irq 11), address 00:1d:60:38:96:0e
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
(irq 6)
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
(irq 3)
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
(irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci2 at ppb1 bus 1
sdhc0 at pci2 dev 1 function 0 "Ricoh 5C822 SD/MMC" rev 0x19: apic 1 int 17
(irq 3)
sdmmc0 at sdhc0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x04: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8009GAH>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
ugen0 at uhub0 port 1 "Syntek USB2.0" rev 2.00/0.05 addr 2
zyd0 at uhub0 port 6 configuration 1 interface 0 "ASUS USB2.0 WLAN" rev
2.00/48.02 addr 3
uhub5 at uhub0 port 7 "Standard Microsystems product 0x2502" rev 2.00/0.01 addr
4
ugen1 at uhub5 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/c.10 addr 5
uhidev0 at uhub5 port 2 configuration 1 interface 0 "PANJIT PANJIT TouchSet
Digitizer" rev 1.10/1.03 addr 6
uhidev0: iclass 3/0, 2 report ids
uhts0 at uhidev0 reportid 1
wsmouse1 at uhts0 mux 0
ums0 at uhidev0 reportid 2: 0 button
wsmouse2 at ums0 mux 0
ubt0 at uhub4 port 2 "ASUS product 0x1712" rev 2.00/19.15 addr 2
uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
zyd0: HMAC ZD1211B, FW 47.25, RF AL2230, PA 0, address 00:1d:60:62:59:ef
zyd1 at uhub0 port 2 configuration 1 interface 0 "ZyDAS USB2.0 WLAN" rev
2.00/48.10 addr 7
zyd1: HMAC ZD1211B, FW 47.25, RF AL2230, PA 0, address 00:18:6e:35:fd:7f
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
uhid0 detached
uhid1 detached
uhidev2 detached
uhidev1 at uhub2 port 2 configuration 1 interface 0 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 1 " USB Keyboard" rev
1.10/1.10 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0
ehci_freex: xfer=0xd2284200 not busy, 0x4f4e5155
ehci_freex: xfer=0xd2284d00 not busy, 0x4f4e5155
