Hi,
>From dmesg, the graphics card in my Sun blade100 is:
machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
machfb0: ATY,RageXL, 1280x1024
which is connected via DVI cable to a Sun monitor #365-1429. This monitor
supports 1280x1...@60hz. However starting X without a config file only run it
at 800x600. These line appears relevant in the Xorg log file:
(II) MACH64(0): <default monitor>: Using default hsync range of 31.50-37.90
kHz
(II) MACH64(0): <default monitor>: Using default vrefresh range of 50.00-70.00
Hz
...
(II) MACH64(0): Not using default mode "1280x1024" (hsync out of range)
I thought that one of the big advantages of DVI was that the card could query
the monitor to discover the supported modes automatically ? Is there any
commands I can use to enable such probing ? or do I can to create an entire
cfg file to manually enable a higher resolution ? Is there any way to
automatically generate a basic config file to subsequently edit ?
thanks,
/Pete
Xorg.log & dmesg follow:
r...@blade100 ~> cat /var/log/Xorg.0.log
(--) Using wscons driver
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.7 sparc64
Current Operating System: OpenBSD blade100.my.domain 4.7 GENERIC#258 sparc64
Build Date: 15 March 2010 06:22:14PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 27 14:37:09 2010
(II) Loader magic: 0x1b20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on openbsd
(--) PCI: (0:0:3:0) 10b9:7101:0000:0000 Acer Labs M7101 Power rev 0
(--) PCI:*(0:0:19:0) 1002:4752:0000:0000 ATI Rage XL rev 39, Mem @
0x04000000/16777216, 0x00426000/4096, I/O @ 0x00000b00/256, BIOS @
0x????????/131072
(==) Using default built-in configuration (12 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(II) System resource ranges:
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/X11R6/lib/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mach64"
(II) Loading /usr/X11R6/lib/modules/drivers//mach64_drv.so
(II) Module mach64: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 6.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) MACH64: Driver for ATI Mach64 chipsets
(II) Primary Device is: PCI 0...@00:13:0
(II) resource ranges after xf86ClaimFixedResources() call:
(II) resource ranges after probing:
(II) MACH64(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) MACH64(0): Depth 24, (--) framebuffer bpp 32
(==) MACH64(0): Using XAA acceleration architecture
(II) MACH64: Mach64 in slot 0:19:0 detected.
(II) MACH64(0): BIOS Data: BIOSSize=0x0000, ROMTable=0x0000.
(II) MACH64(0): BIOS Data: ClockTable=0x0000, FrequencyTable=0x0000.
(II) MACH64(0): BIOS Data: LCDTable=0x0000.
(II) MACH64(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x0000.
(II) MACH64(0): BIOS Data: I2CType=0x00, Tuner=0x00, Decoder=0x00,
Audio=0x0F.
(--) MACH64(0): ATI 3D Rage XL or XC graphics controller detected.
(--) MACH64(0): Chip type 4752 "GR", version 7, foundry TSMC, class 0,
revision 0x00.
(--) MACH64(0): PCI bus interface detected.
(--) MACH64(0): ATI Mach64 adapter detected.
(!!) MACH64(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) MACH64(0): Internal RAMDAC (subtype 1) detected.
(==) MACH64(0): RGB weight 888
(==) MACH64(0): Default visual is TrueColor
(==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
(II) MACH64(0): Using Mach64 accelerator CRTC.
(II) MACH64(0): Storing hardware cursor image at 0x047FFC00.
(II) MACH64(0): Using 8 MB linear aperture at 0x04800000.
(!!) MACH64(0): Virtual resolutions will be limited to 8191 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) MACH64(0): Using Block 0 MMIO aperture at 0x00426400.
(II) MACH64(0): Using Block 1 MMIO aperture at 0x00426000.
(II) MACH64(0): MMIO write caching enabled.
(--) MACH64(0): 8192 kB of SDRAM (1:1) detected (using 8191 kB).
(WW) MACH64(0): Cannot shadow an accelerated frame buffer.
(II) MACH64(0): Engine XCLK 114.773 MHz; Refresh rate code 10.
(--) MACH64(0): Internal programmable clock generator detected.
(--) MACH64(0): Reference clock 29.500 MHz.
(II) MACH64(0): <default monitor>: Using default hsync range of 31.50-37.90
kHz
(II) MACH64(0): <default monitor>: Using default vrefresh range of 50.00-70.00
Hz
(WW) MACH64(0): Unable to estimate virtual size
(II) MACH64(0): Maximum clock: 229.00 MHz
(II) MACH64(0): Not using default mode "640x350" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x175" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "720x400" (vrefresh out of range)
(II) MACH64(0): Not using default mode "360x200" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
(II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "320x240" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "400x300" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MACH64(0): Not using default mode "512x384" (vrefresh out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "512x384" (hsync out of range)
(II) MACH64(0): Not using default mode "1152x864" (hsync out of range)
(II) MACH64(0): Not using default mode "576x432" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x960" (hsync out of range)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x960" (hsync out of range)
(II) MACH64(0): Not using default mode "640x480" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (hsync out of range)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (hsync out of range)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1280x1024" (hsync out of range)
(II) MACH64(0): Not using default mode "640x512" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (hsync out of range)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) MACH64(0): Not using default mode "800x600" (hsync out of range)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "896x672" (hsync out of range)
(II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "896x672" (hsync out of range)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "928x696" (hsync out of range)
(II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "928x696" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "960x720" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "960x720" (hsync out of range)
(II) MACH64(0): Not using default mode "832x624" (hsync out of range)
(II) MACH64(0): Not using default mode "416x312" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (hsync out of range)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1400x1050" (hsync out of range)
(II) MACH64(0): Not using default mode "700x525" (hsync out of range)
(II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "960x720" (hsync out of range)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for
mode)
(II) MACH64(0): Not using default mode "1024x768" (hsync out of range)
(--) MACH64(0): Virtual size is 800x600 (pitch 800)
(**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302
314 doublescan +hsync +vsync (37.9 kHz)
(**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) MACH64(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301
312 doublescan +hsync +vsync (35.2 kHz)
(**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) MACH64(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246
262 doublescan -hsync -vsync (31.5 kHz)
(==) MACH64(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) MACH64(0): I2C bus "Mach64" initialized.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
(II) MACH64(0): [drm] SAREA 2200+1208: 3408
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is -1, (Operation not permitted)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is -1, (Operation not permitted)
drmOpenDevice: Open failed
[drm] failed to load kernel module "mach64"
(EE) [drm] drmOpen failed.
(EE) MACH64(0): [dri] DRIScreenInit Failed
(II) MACH64(0): Largest offscreen areas (with overlaps):
(II) MACH64(0): 800 x 2021 rectangle at 0,600
(II) MACH64(0): 96 x 2022 rectangle at 0,600
(II) MACH64(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Setting up tile and stipple cache:
32 128x128 slots
14 256x256 slots
(==) MACH64(0): Backing store disabled
(==) MACH64(0): Silken mouse enabled
(II) MACH64(0): DPMS enabled
(II) MACH64(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: found Device "/dev/wsmouse"
(**) <default pointer>: Protocol: WSMouse
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) filter chain progression: 2.00
(**) <default pointer>: (accel) filter stage 0: 20.00 ms
(**) <default pointer>: (accel) set acceleration profile 0
(WW) fcntl(9, F_SETOWN): Operation not permitted
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(--) <default keyboard>: using wscons layout no
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "no"
(**) <default keyboard>: XkbLayout: "no"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type:
KEYBOARD)
OpenBSD 4.7 (GENERIC) #258: Wed Mar 17 23:40:34 MDT 2010
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 805306368 (768MB)
avail mem = 767377408 (731MB)
mainbus0 at root: Sun Blade 100 (UltraSPARC-IIe)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 502 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64
b/l)
psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0
psycho0: bus range 0-1, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ebus0 at pci0 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus1 addr 0-ffff ivec 0x2a not configured
power0 at ebus1 addr 800-82f ivec 0x20
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:03:ba:08:46:e8
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd, model 0x0002
"Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
legacy support
alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz
clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
"scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x50: 256MB SDRAM ECC PC133CL2
spdmem1 at iic0 addr 0x51: 256MB SDRAM ECC PC133CL2
spdmem2 at iic0 addr 0x52: 256MB SDRAM ECC PC133CL2
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 0x7e3
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD200BB-60DGA0>
wd0: 16-sector PIO, LBA, 9541MB, 19541088 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD A DH20A4H, QP59> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
ppb0 at pci0 dev 5 function 0 "DEC 21152 PCI-PCI" rev 0x03
pci1 at ppb0 bus 1
ral0 at pci1 dev 1 function 0 "Ralink RT2560" rev 0x01: ivec 0x7ca, address
00:11:50:a8:c8:a2
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
machfb0: ATY,RageXL, 1280x1024
wsdisplay0 at machfb0 mux 1: console (std, sun emulation)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Sun Microsystems Type 6
Keyboard" rev 1.00/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes, country code 19
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 4 configuration 1 interface 0 "Sun Microsystems Type 6
Mouse" rev 1.00/1.02 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
bootpath: /p...@1f,0/i...@d,0/d...@0,0
root on wd0a swap on wd0b dump on wd0b
