Hi all, Running a Sun Fire V120 w/ StorEdge D240 Media Tray.
st0 at scsibus2 targ 4 lun 0: <HP, C5683A, C005> SCSI2 1/sequential removable Ran the following for backup: /sbin/dump -0au -f /dev/nrst0 /dev/sd0a /sbin/dump -0au -f /dev/nrst0 /dev/sd0k /sbin/dump -0au -f /dev/nrst0 /dev/sd0d /sbin/dump -0au -f /dev/nrst0 /dev/sd0f /sbin/dump -0au -f /dev/nrst0 /dev/sd0g /sbin/dump -0au -f /dev/nrst0 /dev/sd0h /sbin/dump -0au -f /dev/nrst0 /dev/sd0j /sbin/dump -0au -f /dev/nrst0 /dev/sd0i /sbin/dump -0au -f /dev/nrst0 /dev/sd0e mt -f /dev/rst0 rewind When I try to restore I get the following: # restore -i -f /dev/rst0 restore: tape read error: Input/output error or # restore -tvs 1 -f /dev/rst0 restore: tape read error: Input/output error I tried w/two DDS3 tapes but still get the same error. The dumps run fine (no errors). Does this mean both tapes are bad or something? Thanks.
