On Wed, Aug 11, 2010 at 10:39 AM, Andres Genovez <andresgeno...@gmail.com> wrote: > 2010/8/11 Matt Bettinger <iam...@gmail.com>: >> I am looking for recommendations on an pci wireless (b/g) card that >> will do hostap and wpa. I checked out the HCL and noticed the Zonet >> 1600 is supported by ral >> > http://www.openbsd.org/cgi-bin/man.cgi?query=ral&apropos=0&sektion=0&manpath= > OpenBSD+Current&arch=i386&format=html >> >> I couldn't find an 1600 but grabbed an 1605 instead with the hopes it >> would just work (15.00USD). It does not, which is fine. >> >> What is a decent high quality card that would be good for making an >> wireless AP? I would prefer pci so I can use different antenna >> options. >> >> re, >> >> mb >> >> > > Hi I was trying to install 3945 ABG INTEL PRO Mini PCI E Wireless Card > for Hp Dell but it arrived dead, not even the Bios recognize it, so I > buy another one, hope this one works and I will post the results. > > Carpe Diem >
Returned card and picked up an Hawking USB HWUG1 with an antenna cable and modified antenna. Plugged into an net 5501-70 and everything loaded up just fine thanks! # dmesg OpenBSD 4.7-current (GENERIC) #28: Thu Jun 10 00:17:32 MDT 2010 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 500 MHz cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX real mem = 536440832 (511MB) avail mem = 510185472 (486MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 20/71/05, BIOS32 rev. 0 @ 0xfac40 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0xa800 cpu0 at mainbus0: (uniprocessor) amdmsr0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) io address conflict 0x6100/0x100 io address conflict 0x6200/0x200 pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31 glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:00:24:c9:58:d0 ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5, address 00:00:24:c9:58:d1 ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9, address 00:00:24:c9:58:d2 ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 00:00:24:c9:58:d3 ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034 em0 at pci0 dev 14 function 0 "Intel PRO/1000T (82544GC)" rev 0x02: irq 10, address 00:02:b3:97:1b:87 hifn0 at pci0 dev 17 function 0 "Hifn 7955/7954" rev 0x00: LZS 3DES ARC4 MD5 SHA1 RNG AES PK, 32KB dram, irq 15 glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio gpio0 at glxpcib0: 32 pins pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 1: <LEXAR ATA FLASH CARD> wd0: 1-sector PIO, LBA, 7631MB, 15630048 sectors wd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7, version 1.0, legacy support ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1 isa0 at glxpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 10: GPIO VLM TMS gpio1 at nsclpcsio0: 29 pins npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 usb1 at ohci0: USB revision 1.0 uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1 biomask 61c7 netmask ffe7 ttymask ffff mtrr: K6-family MTRR support (2 registers) vscsi0 at root scsibus0 at vscsi0: 256 targets softraid0 at root root on wd0a swap on wd0b dump on wd0b rum0 at uhub0 port 1 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 2 rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0e:3b:1f:be:75 ehci_idone: ex=0xd144ef00 is done!