hello @misc, yesterday I've upgraded from 4.7-current to 4.8-current an openbsd box, I sometime use for connecting via a smartphone through ppp but alas after upgrading I'm not able to surf anymore. I've not had the time to browse the changes so any hint in the meanwhile is really helpful
thanks *** 4.7-current (sorry I have only these log) tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 priority: 0 groups: tun egress status: active inet 217.203.153.223 --> 10.6.6.6 netmask 0xffffffff Routing tables Internet: Destination Gateway Flags Refs Use Mtu Prio Iface default 10.6.6.6 UGS 6 660 - 8 tun0 10.6.6.6 217.203.153.223 UH 1 0 1500 4 tun0 *** 4.8-current default: set log Phase Chat LCP IPCP CCP TUN Command set device /dev/cuaU0 disable ipv6cp disable vjcomp disable deflate disable chap disable mppe disable protocomp enable lqr accept lqr isp: set speed 460800 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 20 \"\" AT OK ATQ0 OK AT+CGDCONT=1,\\\"IP\\\",\\\"APN\\\",\\\"\\\ ",0,0 OK \\dATDT\\T TIMEOUT 40 CONNECT" set phone "*99***1#" set ifaddr 10.0.4.1/0 10.0.4.2/0 0.0.0.0 0.0.0.0 add default HISADDR tun0: flags=9951<UP,POINTOPOINT,RUNNING,PROMISC,SIMPLEX,LINK0,MULTICAST> mtu 1500 lladdr fe:e1:ba:d1:aa:9c priority: 0 groups: tun egress status: active inet 217.203.150.212 --> 10.6.6.6 netmask 0xffffffff inet6 fe80::fce1:baff:fed1:aa9c%tun0 -> prefixlen 64 scopeid 0x6 Routing tables Internet: Destination Gateway Flags Refs Use Mtu Prio Iface default 10.6.6.6 UGS 1 4 - 8 tun0 10.6.6.6 link#6 UHC 1 0 1500 4 tun0 10.6.6.6 link#6 UHLc 1 0 1500 4 tun0 OpenBSD 4.8-current (GENERIC.MP) #336: Fri Aug 20 22:52:42 MDT 2010 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 1062797312 (1013MB) avail mem = 1020678144 (973MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (18 entries) bios0: vendor Phoenix Technologies LTD version "R0034J4" date 02/26/2007 bios0: Sony Corporation VGN-C1S_H acpi0 at bios0: rev 0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG APIC BOOT SSDT SSDT acpi0: wakeup devices PWRB(S4) PXS1(S3) PXS2(S3) PXS3(S3) PXS4(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.80 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.50 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEGP) acpiprt2 at acpi0: bus 2 (RP01) acpiprt3 at acpi0: bus 4 (RP02) acpiprt4 at acpi0: bus 6 (RP03) acpiprt5 at acpi0: bus 8 (RP04) acpiprt6 at acpi0: bus 10 (PCIB) acpiec0 at acpi0 acpicpu0 at acpi0: C2, C1, PSS acpicpu1 at acpi0: C2, C1, PSS acpitz0 at acpi0: critical temperature 105 degC acpitz1 at acpi0: critical temperature 105 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 not present acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: PWRB acpidock0 at acpi0: DOCK not docked (0) acpisony0 at acpi0: SNC_ acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: DD01 acpivout1 at acpivideo0: DD02 acpivout2 at acpivideo0: DD03 cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xb0000000, size 0x10000000 inteldrm0 at vga1: apic 1 int 16 (irq 7) drm0 at inteldrm0 "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1 int 22 (irq 4) azalia0: codecs: Realtek ALC262, Conexant/0x2c06, using Realtek ALC262 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17 (irq 3) pci1 at ppb0 bus 2 mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x13, Yukon-2 FE rev. A1 (0x1): apic 1 int 16 (irq 7) msk0 at mskc0 port A: address 00:13:a9:60:1b:eb eephy0 at msk0 phy 0: 88E3082 10/100 PHY, rev. 3 ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16 (irq 7) pci2 at ppb1 bus 4 ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18 (irq 11) pci3 at ppb2 bus 6 wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 int 18 (irq 11), MoW2, address 00:18:de:ad:3e:96 ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21 (irq 10) pci4 at ppb3 bus 8 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23 (irq 5) uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17 (irq 3) uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16 (irq 7) ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23 (irq 5) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci5 at ppb4 bus 10 cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 16 (irq 255), CardBus support disabled "TI PCIXX12 FireWire" rev 0x00 at pci5 dev 3 function 1 not configured "TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2 not configured cardslot0 at cbb0 slot 0 flags 0 pcmcia0 at cardslot0 pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16M, 1.10> ATAPI 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 1 int 19 (irq 10) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00> wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19 (irq 10) iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 mtrr: Pentium Pro MTRR support umass0 at uhub0 port 6 configuration 1 interface 0 "Sony UMH-U09" rev 2.00/4.52 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Sony, USB HS-CARD, 4.52> SCSI0 0/direct removable sd0: drive offline uhub0: port 1 reset failed umass1 at uhub0 port 1 configuration 1 interface 0 "Nokia E52" rev 2.00/1.00 addr 3 umass1: using SCSI over Bulk-Only scsibus2 at umass1: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0: <Nokia, S60, 1.0> SCSI0 0/direct removable sd1: drive offline softraid0 at root root on wd0a swap on wd0b dump on wd0b sd1 detached scsibus2 detached umass1 detached umodem0 at uhub0 port 1 configuration 1 interface 1 "Nokia E52" rev 2.00/1.00 addr 3 umodem0: data interface 2, has no CM over data, has break umodem0: status change notification available ucom0 at umodem0 -- see ya, giovanni