I install OpenBSD 4.7 on a firewall NEC_Express_5800_i110Ra-1h
Be default i config all the three ethernet adapter ,but only the
first em0 can work well,but the other2 one is em1 and the other is
is fxp0 can not work well.
Who can tell me how to fix this problem
ifconfig -a
# ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:17:61:5f:2a
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
inet 192.168.1.88 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::216:17ff:fe61:5f2a%em0 prefixlen 64 scopeid 0x1
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:17:61:5f:29
priority: 0
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.1.99 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::216:17ff:fe61:5f29%em1 prefixlen 64 scopeid 0x2
fxp0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:16:17:61:5f:28
priority: 0
media: Ethernet autoselect (none)
status: no carrier
inet 192.168.1.111 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::216:17ff:fe61:5f28%fxp0 prefixlen 64 scopeid 0x3
enc0: flags=0<> mtu 1536
priority: 0
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
priority: 0
groups: pflog
#
# dmesg
OpenBSD 4.7 (GENERIC) #558: Wed Mar 17 20:46:15 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.73GHz ("GenuineIntel" 686-class) 1.73
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem = 1063743488 (1014MB)
avail mem = 1021964288 (974MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/22/06, BIOS32 rev. 0 @ 0xfa880, SMBIOS
rev. 2.3 @ 0xf0000 (29 entries)
bios0: vendor Phoenix Technologies, LTD version "v1.0070" date 03/22/2006
bios0: NEC Express5800/i110Ra-1h [N8100-1119]
apm0 at bios0: Power Management spec V1.2 (slowidle)
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 3.0 @ 0xf0000/0xcdc4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfccc0/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 4 5 9 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xf600! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1800
cpu0 at mainbus0: (uniprocessor)
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06120d2606000d26
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1730 MHz: speeds: 1733, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: irq 5
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x05: irq 5
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq 5,
address 00:16:17:61:5f:2a
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x05: irq 4
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel PRO/1000MT (82573E)" rev 0x03: irq 4,
address 00:16:17:61:5f:29
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x05: irq 9
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x05: irq 9
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd5
pci3 at ppb2 bus 3
fxp0 at pci3 dev 8 function 0 "Intel PRO/100 VE" rev 0x05, i82562: irq 10,
address 00:16:17:61:5f:28
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x05: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x05: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD1600BEVT-75ZCT2>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x05: irq 11
iic0 at ichiic0
iic0: addr 0x2f 00=40 01=07 02=00 03=00 04=07 05=00 06=00 07=00 14=14 15=62
16=03 17=04 words 00=40ff 01=07ff 02=00ff 03=00ff 04=07ff 05=00ff 06=00ff
07=00ff
spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x85
lm1 at wbsio0 port 0x290/8: W83627THF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask fbcf netmask ffff ttymask ffff
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x13ba Generic USB
K/B" rev 1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "vendor 0x13ba Generic USB
K/B" rev 1.10/0.01 addr 2
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
fxp0: warning: SCB timed out
fxp0: config command timeout
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: warning: SCB timed out
fxp0: config command timeout
#
