Hello list,I want to report this error, i am not sure if it is a hardware error, or something driver related. Maybe someome has already encountered with this and solved in the past, but i could not find anything specific in the list.
I got an old DELL Poweredge 650 1u rack server, and when copying large amount of data (like when using dump) from
one hard disk to another i get this errors in the logs continously: Sep 22 23:53:20 ul4 /bsd: wd0(pciide0:0:0): timeout Sep 22 23:53:21 ul4 /bsd: type: ata Sep 22 23:53:21 ul4 /bsd: c_bcount: 5120 Sep 22 23:53:21 ul4 /bsd: c_skip: 0Sep 22 23:53:21 ul4 /bsd: pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20 Sep 22 23:53:21 ul4 /bsd: wd0a: device timeout reading fsbn 23136 of 23136-23145 (wd0 bn 23199; cn 1 tn 113 sn 15), retrying
Sep 22 23:53:21 ul4 /bsd: wd0: soft error (corrected) The hard disks are not responsible, i changed both to check it out.I tried this with OpenBSD 4.3, 4.4, 4.5 and 4.6 . I will try with 4.7 tomorrow.
This is dmesg:
OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1073184768 (1023MB) avail mem = 1028915200 (981MB) mainbus0 at rootbios0 at mainbus0: AT/286+ BIOS, date 10/08/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xfae10 (77 entries)
bios0: vendor Dell Computer Corporation version "A04" date 10/08/2003 bios0: Dell Computer Corporation PowerEdge 650 acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC SPCR acpi0: wakeup devices PCI0(S5) PCI1(S5) PCI2(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 16 pins ioapic0: misconfigured as apic 0, remapped to apid 1 ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins ioapic1: misconfigured as apic 0, remapped to apid 2 ioapic2 at mainbus0: apid 3 pa 0xfec02000, version 11, 16 pins ioapic2: misconfigured as apic 0, remapped to apid 3 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PCI1) acpiprt2 at acpi0: bus 2 (PCI2) acpicpu0 at acpi0 bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4800 0xcc800/0x200 0xec000/0x4000! pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "ServerWorks GCNB-LE Host" rev 0x32 pchb1 at pci0 dev 0 function 1 "ServerWorks GCNB-LE Host" rev 0x00 pci1 at pchb1 bus 1ami0 at pci1 dev 3 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 2 int 3 (irq 5)
ami0: Dell 520, 64b/lhc, FW 3.28, BIOS v1.05, 64MB RAM ami0: 1 channels, 0 FC loops, 0 logical drives scsibus0 at ami0: 40 targets scsibus1 at ami0: 16 targetsem0 at pci0 dev 3 function 0 "Intel PRO/1000MT (82546EB)" rev 0x01: apic 2 int 1 (irq 15), address 00:04:23:9a:88:10 em1 at pci0 dev 3 function 1 "Intel PRO/1000MT (82546EB)" rev 0x01: apic 2 int 2 (irq 11), address 00:04:23:9a:88:11
vga1 at pci0 dev 4 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pciide0 at pci0 dev 5 function 0 "CMD Technology PCI0680" rev 0x02 pciide0: bus-master DMA support present pciide0: channel 0 wired to native-PCI mode pciide0: using apic 2 int 7 (irq 10) for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <WDC WD1600AAJB-56R1A0> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 wired to native-PCI mode wd1 at pciide0 channel 1 drive 0: <WDC WD1600AAJB-00J3A0> wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB6" rev 0xa0: SMBus disabled
pciide1 at pci0 dev 15 function 1 "ServerWorks CSB6 RAID/IDE" rev 0xa0: DMA atapiscsi0 at pciide1 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targetscd0 at scsibus2 targ 0 lun 0: <MATSHITA, UJDA740 DVD/CDRW, 1.00> ATAPI 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2ohci0 at pci0 dev 15 function 2 "ServerWorks CSB6 USB" rev 0x05: apic 1 int 7 (irq 7), version 1.0, legacy support
pcib0 at pci0 dev 15 function 3 "ServerWorks GCLE-2 Host" rev 0x00 pchb2 at pci0 dev 16 function 0 "ServerWorks CIOB-E" rev 0x12 pchb3 at pci0 dev 16 function 2 "ServerWorks CIOB-E" rev 0x12 pci2 at pchb3 bus 2 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: density unknown mtrr: Pentium Pro MTRR supportuhidev0 at uhub0 port 2 configuration 1 interface 0 "vendor 0x1bcf USB Optical Mouse" rev 2.00/0.10 addr 2
uhidev0: iclass 3/1, 2 report ids ums0 at uhidev0 reportid 1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhid0 at uhidev0 reportid 2: input=1, output=0, feature=0 softraid0 at root root on wd0a swap on wd0b dump on wd0b Regards, Marcos Laufer
