Hi all! I'm having these errors with mpii0:
mpii0: xfer timeout, ccb 4 state 2 mpii0: xfer timeout, ccb 5 state 2 mpii0: xfer timeout, ccb 43 state 2 mpii0: xfer timeout, ccb 51 state 2 mpii0: xfer timeout, ccb 24 state 2 ... mpii0: xfer timeout, ccb 104 state 2 And also: /bsd: sd0(mpii0:1:0): Check Condition (error 0x70) on opcode 0x28 /bsd: SENSE KEY: Media Error /bsd: INFO: 0xc664e20 (VALID flag on) /bsd: ASC/ASCQ: Unrecovered Read Error /bsd: sd0(mpii0:1:0): Check Condition (error 0x70) on opcode 0x28 This is on a Dell PowerEdge R410 with two disks as RAID 1 on mpii(4). The machine normally just lockups under some IO load due to a PostgreSQL server. As this is on the datacenter I would like to know if this could be triggered by something else than hardware before going there locally. This is on 4.7 -release AMD64. Any feedback is appreciated, --rodolfo OpenBSD 4.7 (GENERIC.MP) #130: Wed Mar 17 20:48:50 MDT 2010 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 3478622208 (3317MB) avail mem = 3379052544 (3222MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf79c000 (77 entries) bios0: vendor Dell Inc. version "1.3.9" date 04/07/2010 bios0: Dell Inc. PowerEdge R410 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WDAT SLIC ERST HEST BERT EINJ SRAT TCPA SSDT acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 16 (boot processor) cpu0: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz, 1862.26 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 132MHz cpu1 at mainbus0: apid 20 (application processor) cpu1: Intel(R) Xeon(R) CPU E5502 @ 1.87GHz, 1862.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 256KB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins ioapic1: misconfigured as apic 0, remapped to apid 1 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (PEX3) acpiprt3 at acpi0: bus 3 (PEX7) acpiprt4 at acpi0: bus -1 (PEX9) acpiprt5 at acpi0: bus -1 (PEXA) acpiprt6 at acpi0: bus -1 (SBEX) acpiprt7 at acpi0: bus 4 (COMP) acpicpu0 at acpi0: C3, C1 acpicpu1 at acpi0: C3, C1 ipmi at mainbus0 not configured cpu0: unknown i686 model 0x1a, can't get bus clock cpu0: EST: PSS not yet available for this processor pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 5500 Host" rev 0x13 ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13 pci1 at ppb0 bus 1 bnx0 at pci1 dev 0 function 0 "Broadcom BCM5716" rev 0x20: apic 1 int 4 (irq 15) bnx1 at pci1 dev 0 function 1 "Broadcom BCM5716" rev 0x20: apic 1 int 16 (irq 14) ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13 pci2 at ppb1 bus 2 ppb2 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21 (irq 0) pci3 at ppb2 bus 3 mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2008" rev 0x02: apic 1 int 6 (irq 15) scsibus0 at mpii0: 42 targets sd0 at scsibus0 targ 1 lun 0: <Dell, Virtual Disk, 1028> SCSI4 0/direct fixed sd0: 237824MB, 512 bytes/sec, 487063552 sec total mpii0: unable to create sensors "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 17 (irq 14) uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 18 (irq 11) ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 19 (irq 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 uhci2 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 6) uhci3 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 0 int 20 (irq 5) uhci4 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 6) uhci5 at pci0 dev 29 function 3 "Intel 82801JI USB" rev 0x00: apic 0 int 20 (irq 5) ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 0 int 21 (irq 6) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90 pci4 at ppb3 bus 4 vga1 at pci4 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) pcib0 at pci0 dev 31 function 0 "Intel 82801JIR LPC" rev 0x00 pciide0 at pci0 dev 31 function 2 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 0 int 23 (irq 14) for native-PCI interrupt pciide1 at pci0 dev 31 function 5 "Intel 82801JI SATA" rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 0 int 22 (irq 11) for native-PCI interrupt atapiscsi0 at pciide1 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <TEAC, DVD-ROM DV-28SW, R.2A> ATAPI 5/cdrom removable cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 mtrr: Pentium Pro MTRR support uhub8 at uhub0 port 3 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr 2 uhidev0 at uhub4 port 1 configuration 1 interface 0 "NOVATEK USB Keyboard" rev 1.10/1.12 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev1 at uhub4 port 1 configuration 1 interface 1 "NOVATEK USB Keyboard" rev 1.10/1.12 addr 2 uhidev1: iclass 3/0, 4 report ids uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0 uhid2 at uhidev1 reportid 4: input=2, output=0, feature=0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root root on sd0a swap on sd0b dump on sd0b WARNING: / was not properly unmounted bnx0: address a4:ba:db:45:03:9e brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8 bnx1: address a4:ba:db:45:03:9f brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8