> OpenBSD 4.8 (GENERIC.MP) #335: Mon Aug 16 09:09:20 MDT 2010 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 2112618496 (2014MB) > avail mem = 2042560512 (1947MB) > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfbf60 (49 entries) > bios0: vendor American Megatrends Inc. version "080012" date 03/07/2006 > bios0: ECS P4M800PRO-M > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP APIC OEMB > acpi0: wakeup devices UAR1(S4) MC97(S4) USB1(S1) USB2(S1) USB3(S1) USB4(S1) > PCI1(S4) PCI2(S4) PCI3(S4) OLAN(S4) ILAN(S4) SLPB(S4) PWRB(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Pentium(R) D CPU 2.80GHz, 2795.01 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG > cpu0: 1MB 64b/line 8-way L2 cache > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Pentium(R) D CPU 2.80GHz, 2794.56 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LONG > cpu1: 1MB 64b/line 8-way L2 cache > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins > ioapic0: misconfigured as apic 1, remapped to apid 2 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (P0P1) > acpicpu0 at acpi0acpi0: unable to load \\_PR_.CPU1.SSDT > > acpicpu1 at acpi0acpi0: unable to load \\_PR_.CPU2.SSDT > > acpitz0 at acpi0: critical temperature 110 degC > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: PWRB > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00 > agp at pchb0 not configured > pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00 > pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00 > pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00 > pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00 > pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: apic 2 int 16 (irq > 10), address 00:1a:3f:51:72:3d > rlphy0 at rl0 phy 0: RTL internal PHY > rl1 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq > 11), address 00:1a:3f:51:46:59 > rlphy1 at rl1 phy 0: RTL internal PHY > rl2 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 18 (irq > 5), address 00:1a:3f:52:34:4f > rlphy2 at rl2 phy 0: RTL internal PHY > pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA > pciide0: using apic 2 int 20 (irq 5) for native-PCI interrupt > wd0 at pciide0 channel 0 drive 0: <SAMSUNG HD082GJ> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 > pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, > channel 0 configured to compatibility, channel 1 configured to compatibility > pciide1: channel 0 disabled (no drives) > pciide1: channel 1 disabled (no drives) > uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > (irq 10) > uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > (irq 10) > uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > (irq 11) > uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 > (irq 11) > ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21 > (irq 5) > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1 > viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00 > iic0 at viapm0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: apic 2 int 23 (irq > 10), address 00:16:ec:82:1c:3b > ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI > 0x004063, model 0x0032 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at mainbus0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > it0 at isa0 port 0x2e/2: IT8705F rev 3, EC port 0x290 > mtrr: Pentium Pro MTRR support > softraid0 at root > root on wd0a swap on wd0b dump on wd0b > kernel: protection fault trap, code=0 > Stopped at pool_do_get+0x133: movq %rax,0x10(%rcx) > > > This occurred 2 times between 2 days >
No, that is not what happened. I bet the next thing it said is: RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! But you decided you are special, and don't want us to help us help you.
