On Sat, Jan 01, 2011 at 06:31:10PM -0600, netmgr7 wrote: > I have tried booting kernel files with acpi enabled only, apm > enabled only, acpi & apm disabled, and acpi & apm disabled. Still no > successful reboot. > > Don't know of anything else to try, so any other tips/hints would be > appreciated. > > Thanks in advance! > > MC.
Try a -current snapshot to prove the problem still exists. Try 3.4, 3.5. 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7 and see where it breaks. Read the FAQ for more suggestions. Starting with http://www.openbsd.org/report.html .... Ken > > On 12/31/2010 6:00 PM, netmgr7 wrote: > >On 12/31/2010 3:23 PM, Ted Unangst wrote: > >>On Fri, Dec 31, 2010 at 1:50 AM, Markus Bergkvist > >><markus.bergkv...@telia.com> wrote: > >>>>I've been using some Compaq Deskpro DPENS Pentium II > >>>>machines as OpenBSD > >>>>firewalls since late 2.x to early 3.x. Recently I made the > >>>>jump to 4.8 and > >>>>all > >>>>seems to work fine except I noticed the reboot command does > >>>>not appear to > >>>>work. The machine gets halted, screen blanks out, but that's > >>>>as far as it > >>>>goes. I re-installed 3.3 and confirmed the reboot works fine > >>>>under 3.3. > >>>> > >>>>Any tips/hints to help troubleshoot or resolve this problem would be > >>>>greatly > >>>>appreciated. > >>We wouldn't have to play guess the machine if you sent a dmesg, but my > >>first approach would be to disable some combination of acpi and apm. > >> > >>>Do you have powerdown=YES in /etc/rc.shutdown? > >>That has nothing to do with rebooting. > >> > >> > > > >Here's the dmesg from my machine.... > > > >OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010 > > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > >cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 350 MHz > >cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR > >real mem = 66678784 (63MB) > >avail mem = 55726080 (53MB) > >mainbus0 at root > >bios0 at mainbus0: AT/286+ BIOS, date 06/29/98, BIOS32 rev. 0 @ > >0xec700, SMBIOS rev. 2.1 @ 0xf1146 (48 entries) > >bios0: vendor Compaq version "686T5" date 06/29/98 > >bios0: Compaq Deskpro EN Series SFF > >acpi0 at bios0: rev 0 > >acpi0: sleep states S0 S1 S4 S5, can't enable ACPI > >bios0: ROM list: 0xc0000/0x8000 0xe0000/0x8000! > >cpu0 at mainbus0: (uniprocessor) > >pci0 at mainbus0 bus 0: configuration mode 1 (bios) > >pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x02 > >intelagp0 at pchb0 > >agp0 at intelagp0: aperture at 0x44000000, size 0x4000000 > >ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x02 > >pci1 at ppb0 bus 1 > >vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c > >wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > >wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > >fxp0 at pci0 dev 10 function 0 "Intel 8255x" rev 0x05, i82558: irq > >11, address 00:08:c7:81:20:fc > >inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0 > >xl0 at pci0 dev 13 function 0 "3Com 3c905 100Base-TX" rev 0x00: > >irq 11, address 00:60:97:cf:35:9b > >nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1 > >xl1 at pci0 dev 14 function 0 "3Com 3c905 100Base-TX" rev 0x00: > >irq 11, address 00:60:08:b0:cc:d9 > >nsphy1 at xl1 phy 24: DP83840 10/100 PHY, rev. 1 > >piixpcib0 at pci0 dev 20 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02 > >pciide0 at pci0 dev 20 function 1 "Intel 82371AB IDE" rev 0x01: > >DMA, channel 0 wired to compatibility, channel 1 wired to > >compatibility > >wd0 at pciide0 channel 0 drive 0: <WDC AC26400R> > >wd0: 16-sector PIO, LBA, 6149MB, 12594960 sectors > >wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > >atapiscsi0 at pciide0 channel 1 drive 0 > >scsibus0 at atapiscsi0: 2 targets > >cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CD-224E, 8.0J> ATAPI > >5/cdrom removable > >cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > >uhci0 at pci0 dev 20 function 2 "Intel 82371AB USB" rev 0x01: irq 11 > >piixpm0 at pci0 dev 20 function 3 "Intel 82371AB Power" rev 0x02: SMI > >iic0 at piixpm0 > >admtemp0 at iic0 addr 0x4c: adm1021 > >spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3 > >isa0 at piixpcib0 > >isadma0 at isa0 > >com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > >com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > >pckbc0 at isa0 port 0x60/5 > >pckbd0 at pckbc0 (kbd slot) > >pckbc0: using irq 1 for kbd slot > >wskbd0 at pckbd0: console keyboard, using wsdisplay0 > >pmsi0 at pckbc0 (aux slot) > >pckbc0: using irq 12 for aux slot > >wsmouse0 at pmsi0 mux 0 > >sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01 > >midi0 at sb0: <SB MIDI UART> > >audio0 at sb0 > >opl at sb0 not configured > >pcppi0 at isa0 port 0x61 > >spkr0 at pcppi0 > >lpt0 at isa0 port 0x378/4 irq 7 > >npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > >fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > >fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec > >usb0 at uhci0: USB revision 1.0 > >uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > >biomask ef45 netmask ef45 ttymask ffdf > >mtrr: Pentium Pro MTRR support > >softraid0 at root > >root on wd0a swap on wd0b dump on wd0b > >#
