Hi all, I'm having a hard time getting vpnc (0.5.3) from packages to work on 4.8. I have it running on Mac OS X (and Linux also), but it just doesn't work(tm) on OpenBSD.
Everything get's set up properly (in my eyes). The tun device is created, the IP Address is assigned, the routes are set. But it looks like vpnc just doesn't forward anything. net.inet.esp.enable and net.inet.ah.enable are set to 0, as mentioned by the vpnc installation script. # ping sipgate.de PING sipgate.de (217.10.79.9): 56 data bytes ping: sendto: No buffer space available ping: wrote sipgate.de 64 chars, ret=-1 Has anyone got this working on a recent OpenBSD? IPSec gateway secureconnect.sipgate.net IPSec ID secureconnect.sipgate.net IPSec secret sipgate-key #IPSec target network 217.10.64.0/255.255.240.0 IKE Authmode psk Xauth username user Xauth password pass #NAT Traversal Mode force-natt Script /etc/vpnc/vpnc-sipgate-script (Custom script is the default one, minus the resolv.conf handling and sets 217.10.64.0/255.255.240.0 instead of default route) tun0: flags=51<UP,POINTOPOINT,RUNNING> mtu 1412 priority: 0 groups: tun status: active inet 212.9.32.144 --> 212.9.32.144 netmask 0xffffffff # netstat -nrf inet Routing tables Internet: Destination Gateway Flags Refs Use Mtu Prio Iface default 10.1.16.1 UGS 4 32 - 8 em0 10.1.16/24 link#1 UC 2 0 - 4 em0 10.1.16.1 00:50:8b:95:a4:d2 UHLc 1 5 - 4 em0 10.1.16.128 00:23:df:a7:8d:9e UHLc 1 154 - 4 em0 10.1.16.222 127.0.0.1 UGHS 0 0 33160 8 lo0 127/8 127.0.0.1 UGRS 0 0 33160 8 lo0 127.0.0.1 127.0.0.1 UH 2 0 33160 4 lo0 212.9.32.151 212.9.32.151 UH 1 0 - 4 tun0 217.10.64/20 212.9.32.151 UGS 0 0 - 8 tun0 224/4 127.0.0.1 URS 0 0 33160 8 lo0