On Mon, 10 Jan 2011, Super Biscuit wrote:
> http://lowendmac.com/imacs/rev-d-imac-g3-333-mhz.html
>
> Read a few paragraphs down. If the internal drive in question does not work,
> then find a compatible replacement. You're also looking at the fact that the
> rom is OldWorld and may need a few tweaks and twerps to get it going.
Well, found this:
"Tray-loading iMacs cannot boot from USB drives (see Apple Knowledge
Base Article #58430, USB Info and Benefits of Dual-Channel USB)."
My model is a bit different:
[ using 454796 bytes of bsd ELF symbol table ]
console out [ATY,Rage128k]console in [keyboard] , using USB
: memaddr 94000000 size 4000000, : consaddr 94008000, : ioaddr 90020000, size
20000: memtag 8000, iotag 8000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 4.8 (GENERIC) #95: Mon Aug 16 09:13:15 MDT 2010
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 335544320 (320MB)
avail mem = 311443456 (297MB)
mainbus0 at root: model PowerMac2,1
cpu0 at mainbus0: 750 (Revision 0x202): 350 MHz: 512KB backside cache
mem0 at mainbus0
spdmem0 at mem0: 256MB SDRAM non-parity PC133CL2
spdmem1 at mem0: 64MB SDRAM non-parity PC100CL3
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x02
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
pgs0 at macgpio0: irq 55
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker
audio0 at awacs0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x9, 0% charged
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <Maxtor 6E040L0>
wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 offset 0x20000 irq 20: DMA
wdc2 at macobio0 offset 0x21000 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N Eth" rev 0x00
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x00: irq 41, address
00:0a:27:d6:af:ae
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Holtek product 0x1203" rev
2.00/2.80 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Holtek product 0x1203" rev
2.00/2.80 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub1 port 1 configuration 1 interface 0 "PIXART USB OPTICAL MOUSE"
rev 1.10/1.00 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
bootpath: /p...@f2000000/mac...@17/at...@1f000/d...@0:/bsd
root on wd0a swap on wd0b dump on wd0b
Thank you.
