I am puzzled by the fact that interface ppp0 is not automagically
assigned to interface group ``egress'' though a default route points to
it. This does not seem to match ifconfig(8): ``The interface(s) the
default route(s) point to are members of the egress interface group.''
On the other hand bwi0 stays in the ``egress'' group even if the default
route pointing to it is removed.
According to my OpenBSD experience it is probably me getting something
wrong, anyone got a clue stick to apply on me?
$ netstat -n -r -f inet
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio
Iface
default 192.168.111.111 UGS 1 68 - 12
bwi0
default 10.1.67.76 UG 0 0 - 56
ppp0
10.1.67.76 10.120.190.120 UH 1 0 - 4
ppp0
127/8 127.0.0.1 UGRS 0 0 33200 8
lo0
127.0.0.1 127.0.0.1 UH 5 82 33200 4
lo0
192.168.111/24 link#1 UC 1 0 - 4
bwi0
192.168.111.111 00:0e:56:00:4f:90 UHLc 1 4 - 4
bwi0
192.168.111.205 127.0.0.1 UGHS 0 0 33200 8
lo0
224/4 127.0.0.1 URS 0 0 33200 8
lo0
$ ifconfig bwi0
bwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:14:a4:81:85:48
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect (DS11 mode 11b)
status: active
ieee80211: [snip]
inet6 fe80::214:a4ff:fe81:8548%bwi0 prefixlen 64 scopeid 0x1
inet 192.168.111.205 netmask 0xffffff00 broadcast 192.168.111.255
$ ifconfig ppp0
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
priority: 0
groups: ppp
inet 10.120.190.120 --> 10.1.67.76 netmask 0xff000000
$ sudo route -n delete default
$ netstat -n -r -f inet
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio
Iface
default 10.1.67.76 UG 0 14 - 56
ppp0
10.1.67.76 10.120.190.120 UH 1 0 - 4
ppp0
127/8 127.0.0.1 UGRS 0 0 33200 8
lo0
127.0.0.1 127.0.0.1 UH 3 280 33200 4
lo0
192.168.111/24 link#1 UC 1 0 - 4
bwi0
192.168.111.111 00:0e:56:00:4f:90 UHLc 0 24 - 4
bwi0
192.168.111.205 127.0.0.1 UGHS 0 0 33200 8
lo0
224/4 127.0.0.1 URS 0 0 33200 8
lo0
$ ifconfig bwi0
bwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:14:a4:81:85:48
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect (DS11 mode 11b)
status: active
ieee80211: [snip]
inet6 fe80::214:a4ff:fe81:8548%bwi0 prefixlen 64 scopeid 0x1
inet 192.168.111.205 netmask 0xffffff00 broadcast 192.168.111.255
$ ifconfig ppp0
ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
priority: 0
groups: ppp
inet 10.120.190.120 --> 10.1.67.76 netmask 0xff000000
$ dmesg
OpenBSD 4.9-beta (GENERIC) #650: Sun Feb 6 17:26:25 MST 2011
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz ("GenuineIntel" 686-class) 2
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 1072721920 (1023MB)
avail mem = 1045041152 (996MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/12/03, BIOS32 rev. 0 @ 0xfd7e0, SMBIOS
rev. 2.31 @ 0xe0010 (48 entries)
bios0: vendor IBM version "1IET66WW (2.05 )" date 06/12/2003
bios0: IBM 2366EG9
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S4) PCI1(S4) DOCK(S4)
USB0(S3) USB1(S3) USB2(S3) AC97(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0: C3, C2, FVS, 2000, 1200 MHz
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 94 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "IBM-COMPATIBLE" serial 20884 type LION oem "GW"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: irq 3
drm0 at radeondrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 3
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: irq 7
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: irq 6
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
mem address conflict 0x50000000/0x1000
mem address conflict 0x51000000/0x1000
cbb0 at pci2 dev 0 function 0 "TI PCI1520 CardBus" rev 0x01: irq 3
cbb1 at pci2 dev 0 function 1 "TI PCI1520 CardBus" rev 0x01: irq 5
bwi0 at pci2 dev 2 function 0 "Broadcom BCM4318" rev 0x02: irq 6, address
00:14:a4:81:85:48
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x42, i82562: irq 9,
address 00:09:6b:3f:67:a8
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD3200BEVE-00A0HT0>
wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVRKD08, 1.00> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02: irq 5
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02: irq 5, ICH3
AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask eded netmask efed ttymask ffff
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
scsibus2 at softraid0: 1 targets
sd0 at scsibus2 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct fixed
sd0: 256006MB, 512 bytes/sec, 524300592 sec total
com3 at pcmcia1 function 1 "Sierra Wireless, AC850, 3G Network Adapter" port
0x33f8/8: ns16550a, 16 byte fifo
