No. The IP is a external IP bound to the jail by the host. So there is no nat 
needed.

Rob Sciuk <r...@controlq.com> schrieb:
>
>
>Don't you have to nat your interface (/etc/pf.conf) within the jail to
>be 
>viewed externally??
>
>
>
>
>On Tue, 7 Jan 2014, Gilles Chehade wrote:
>
>> Date: Tue, 7 Jan 2014 20:14:31 +0100
>> From: Gilles Chehade <gil...@poolp.org>
>> To: Martin Kropfinger <free...@rakor-net.de>
>> Cc: misc@opensmtpd.org
>> Subject: Re: smtpd: socket: Protocol not supported on FreeBSD9.2
>> 
>> On Tue, Jan 07, 2014 at 08:03:35PM +0100, Martin Kropfinger wrote:
>>> Am Tue, 7 Jan 2014 19:27:13 +0100
>>> schrieb Gilles Chehade <gil...@poolp.org>:
>>>
>>>> On Tue, Jan 07, 2014 at 07:19:10PM +0100, Martin Kropfinger wrote:
>>>
>>>> Care to share your ifconfig output ?
>>>
>>> This is the ifconfig output from within the jail. The host holds
>>> five IPs on one interface distributing them to the jails. The jail
>>> itself has only one IP. I hope it is ok for you that I changed the
>>> output a bit (I changed ether, inet and broadcast).
>>>
>>>  # ifconfig
>>> re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
>1500
>>>        
>options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
>>>         ether rr:ss:tt:uu:vv:ww
>>>         inet xxx.yyy.53.125 netmask 0xffffffe0 broadcast
>xxx.yyy.53.127
>>>         media: Ethernet autoselect (1000baseT <full-duplex>)
>>>         status: active
>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>>>         options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
>>> ipfw0: flags=8801<UP,SIMPLEX,MULTICAST> metric 0 mtu 65536
>>
>> Can you try to replace "listen on localhost" with "listen on
>0.0.0.0", I
>> suspect the ipfw0 interface is causing smtpd to fail listening
>>
>>
>
>-- 
>-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=
>Robert S. Sciuk                http://www.controlq.com         259 Simcoe St. 
>S.
>Control-Q Research     tel: 905.706.1354               Oshawa, Ont.
>r...@controlq.com                                      Canada, L1H 4H3

-- 
Diese Nachricht wurde von meinem Mobiltelefon mit Kaiten Mail gesendet.

Reply via email to