On Jun 14, 2015, at 4:42 PM, Joerg Jung wrote:
> On Sun, Jun 14, 2015 at 03:02:32PM -0500, Edgar Pettijohn III wrote:
>>
>> On Jun 14, 2015, at 10:26 AM, Edgar Pettijohn III wrote:
>>
>>> I am trying to install the "extras" from
>>> https://opensmtpd.org/archives/opensmtpd-extras-latest.tar.gz on OpenBSD
>>> 5.7 amd64. I used the following ./configure
>>>
>>> # ./configure --libexecdir=/usr/libexec/smtpd --bindir=/usr/bin
>>> --sbindir=/usr/sbin --sysconfdir=/etc --mandir=/usr/share/man
>>> --with-mantype=man
>>>
>>> The build and install goes smoothly, however the manual pages don't appear
>>> to be installed. Any help/suggestions welcomed.
>>>
>>> Thanks,
>>>
>>> Edgar
>>> --
>>> You received this mail because you are subscribed to [email protected]
>>> To unsubscribe, send a mail to: [email protected]
>>
>> disregard the above
>>
>> Apparently if you don't supply ./configure --with-filter-"something" then
>> they don't get built and installed, so I added --with-filter-regex as it
>> seemed easy to play with. It built and installed correctly.
>>
>> To implement I added the following to smtpd.conf:
>>
>> table aliases db:/etc/mail/aliases.db
>> table vusers file:/etc/mail/vusers
>> table vdomains file:/etc/mail/vdomains
>> table creds file:/etc/mail/creds
>> table recipients file:/etc/mail/recipients
>> filter regex "/usr/libexec/smtpd/filter-regex"
>
> Wrong syntax. See parse.y, the last part is not the full path.
What do you mean by "the last part is not the full path."
>
>> bounce-warn 1h, 6h, 2d
>> expire 3d
>>
>> listen on lo0 port 25 filter regex tag FILTERED
>> listen on egress
>> listen on egress port submission tls-require auth <creds> tag GOODTOGO
>>
>> accept for local alias <aliases> deliver to maildir
>> accept tagged GOODTOGO for any relay
>>
>> # tagged mail returned from regex-filter deliver
>> accept tagged FILTERED for domain <vdomains> virtual <vusers> deliver to mda
>> \
>> "/usr/local/libexec/dovecot/dovecot-lda -f %{sender} -d %{rcpt}"
>>
>> # untagged mail
>> accept from any for domain <vdomains> recipient <recipients> relay via \
>> smtp://127.0.0.1:25
>>
>> /etc/mail/filter-regex.con
>> dataline (Viagra|Cialis)
>>
>> However, an email sent with Subject: Viagra still makes it through.
>
> Make sure the filter was loaded. Start smtpd in debug mode to see
> if the filter is loaded.
It does not show the filter loading. :(
>
> If it is not loaded, pay attention to libexecdir, AFAIK there is a
> configure piece missing, therefore the filter binaries are installed to
> the wrong path (on OpenBSD), e.g. libexec/smtpd vs libexec/opensmtpd
>
> You may also want to build and enable filter-trace to see what is
> happening (e.g. create a filter chain).
Rebuilt with filter-trace. And changed libexecdir=/usr/libexec
This installed to /usr/libexec/opensmtpd
# ls -1p /usr/libexec/opensmtpd/
filter-regex
filter-stub
filter-trace
filter-void
Tried the following:
# cat /etc/mail/smtpd.conf.test
table aliases db:/etc/mail/aliases.db
table vusers file:/etc/mail/vusers
table vdomains file:/etc/mail/vdomains
table creds file:/etc/mail/creds
filter trace "/usr/libexec/opensmtpd/filter-trace"
bounce-warn 1h, 6h, 2d
expire 3d
listen on egress filter trace auth-optional tag FILTERED
listen on egress port submission tls-require auth <creds> tag GOODTOGO
accept for local alias <aliases> deliver to maildir
accept tagged GOODTOGO for any relay
# tagged mail returned from regex-filter deliver
accept from any tagged FILTERED for domain <vdomains> virtual <vusers> deliver
to mda \
"/usr/local/libexec/dovecot/dovecot-lda -f %{sender} -d %{rcpt}"
Still doesn't show filter-trace loading after #smtpd -dvvv -f
/etc/mail/smtpd.conf.test
I appreciate the help. Thanks
>
>> I also tried the following with the same results:
>>
>> table aliases db:/etc/mail/aliases.db
>> table vusers file:/etc/mail/vusers
>> table vdomains file:/etc/mail/vdomains
>> table creds file:/etc/mail/creds
>> table recipients file:/etc/mail/recipients
>> filter regex "/usr/libexec/smtpd/filter-regex"
>>
>> bounce-warn 1h, 6h, 2d
>> expire 3d
>>
>>
>> listen on egress filter regex tls auth-optional tag FILTERED
>> listen on egress port submission tls-require auth <creds> tag GOODTOGO
>>
>> accept for local alias <aliases> deliver to maildir
>> accept tagged GOODTOGO for any relay
>>
>> # tagged mail returned from regex-filter deliver
>> accept from any tagged FILTERED for domain <vdomains> virtual <vusers>
>> deliver to mda \
>> "/usr/local/libexec/dovecot/dovecot-lda -f %{sender} -d %{rcpt}"
>>
>>
>> --
>> You received this mail because you are subscribed to [email protected]
>> To unsubscribe, send a mail to: [email protected]
>>
>>
>
> --
> You received this mail because you are subscribed to [email protected]
> To unsubscribe, send a mail to: [email protected]
--
You received this mail because you are subscribed to [email protected]
To unsubscribe, send a mail to: [email protected]
