Hello Tobias,
I assume it's `getent passwd`, because it needs a database.
This is my output:
vmail:*:2000:2000:Virtual Mail Account:/var/vmail:/sbin/nologin
On 09.04.23 23:17, Tobias Fiebig wrote:
Heho,
can you do a `getent|grep vmail` on your system? That sounds like you
haven't fully configured the virtual setup?
With best regards,
Tobias
On Sun, 2023-04-09 at 23:15 +0200, Benjamin Stürz wrote:
Hello Tobias,
Thanks for your reply.
I put your script into /usr/local/lib/dovecot/sieve/redirect.sieve
and compiled it with sievec.
I also put
> sieve_after =
file:/usr/local/lib/dovecot/sieve/redirect.sieve
into my plugin section and enabled lmtp in both dovecot and smtpd.
Unfortunately this caused errors like:
>
a42fc59a8f9aa94a|inet4|mda|auth|be...@stuerz.xyz
|be...@stuerz.xyz|be...@stuerz.xyz|1681074451|1681074451|0|1|pending|
5|"mail.lmtp:
LMTP server error: 550 5.1.1 <vmail> User doesn't exist: vmail"
when sending a test email to myself.
I then removed "virtual <virtuals>" from my smtpd.conf and it
replaced
"vmail" with "benni" (not be...@stuerz.xyz).
I have reverted the change in smtpd.conf again.
My full configs:
/etc/dovecot/local.conf:
auth_mechanisms = plain login
first_valid_uid = 2000
first_valid_gid = 2000
mail_plugin_dir = /usr/local/lib/dovecot
managesieve_notify_capability = mailto
managesieve_sieve_capability = fileinto reject envelope encoded-
character vacation subaddress comparator-i;ascii-numeric relational
regex imap4flags copy include variables body enotify environment
mailbox date index ihave duplicate mime foreverypart extracttext
imapsieve vnd.dovecot.imapsieve
mbox_write_locks = fcntl
mmap_disable = yes
passdb {
args = scheme=CRYPT username_format=%u
/etc/mail/credentials.dovecot
driver = passwd-file
name =
}
mail_location =
maildir:/var/vmail/%d/%n:INBOX=/var/vmail/%d/%n/Inbox:LAYOUT=fs
namespace inbox {
inbox = yes
mailbox Drafts {
auto = subscribe
special_use = \Drafts
}
mailbox Junk {
auto = subscribe
special_use = \Junk
autoexpunge = 30d
}
mailbox Sent {
auto = subscribe
special_use = \Sent
}
mailbox Trash {
auto = subscribe
special_use = \Trash
}
mailbox Archive {
auto = subscribe
special_use = \Archive
}
}
plugin {
imapsieve_mailbox1_before =
file:/usr/local/lib/dovecot/sieve/report-spam.sieve
imapsieve_mailbox1_causes = COPY
imapsieve_mailbox1_name = Junk
imapsieve_mailbox2_before =
file:/usr/local/lib/dovecot/sieve/report-ham.sieve
imapsieve_mailbox2_causes = COPY
imapsieve_mailbox2_from = Junk
imapsieve_mailbox2_name = *
sieve_after =
file:/usr/local/lib/dovecot/sieve/redirect.sieve
sieve = file:~/sieve;active=~/.dovecot.sieve
sieve_global_extensions = +vnd.dovecot.pipe
+vnd.dovecot.environment
sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve
sieve_plugins = sieve_imapsieve sieve_extprograms
}
protocols = imap sieve lmtp
service imap-login {
inet_listener imap {
port = 0
}
}
service managesieve-login {
inet_listener sieve {
port = 4190
}
inet_listener sieve_deprecated {
port = 2000
}
}
ssl_cert = </etc/ssl/mixdown.me.crt
ssl_key = </etc/ssl/private/mixdown.me.key
userdb {
args = username_format=%u /etc/mail/credentials.dovecot
driver = passwd-file
name =
}
protocol imap {
mail_plugins = " imap_sieve"
}
protocol lda {
mail_plugins = $mail_plugins sieve
}
protocol lmtp {
mail_plugins = $mail_plugins sieve
}
/etc/mail/smtpd.conf:
# $OpenBSD: smtpd.conf,v 1.14 2019/11/26 20:14:38 gilles Exp
$
# This is the smtpd server system-wide configuration file.
# See smtpd.conf(5) for more information.
pki "mail" cert "/etc/ssl/mixdown.me.fullchain.pem"
pki "mail" key "/etc/ssl/private/mixdown.me.key"
table aliases file:/etc/mail/aliases
table credentials file:/etc/mail/credentials.smtpd
table virtuals file:/etc/mail/virtuals
filter dkim_sign proc-exec "filter-dkimsign -d mixdown.me -s
selector1 -k /etc/mail/dkim/mixdown.me.key" user _dkimsign group
_dkimsign
#filter check_fcrdns phase connect match !fcrdns disconnect "550 no
FCrDNS"
#filter check_rdns phase connect match !rdns disconnect "550 no
rDNS"
filter rspamd proc-exec "/usr/local/libexec/smtpd/filter-rspamd"
filter filters chain { dkim_sign, rspamd }
listen on all tls pki "mail" #filter "filters"
listen on egress port submission tls-require pki "mail" auth
<credentials> filter "filters"
listen on egress port smtps tls-require pki "mail" auth
<credentials> filter "filters"
action "local_mail" mbox alias <aliases>
#action "domain_mail" maildir
"/var/vmail/%{dest.domain:lowercase}/%{dest.user:lowercase|strip}/I
nbox" virtual <virtuals>
action "domain_mail" lmtp "/var/dovecot/lmtp" #virtual <virtuals>
action "outbound" relay
match from any for domain "mixdown.me" action "domain_mail"
match from any for domain "stuerz.art" action "domain_mail"
match from any for domain "stuerz.xyz" action "domain_mail"
match from local for local action "local_mail"
match from auth for any action "outbound"
match from local for any action "outbound"
match from any for any reject
On 09.04.23 22:28, Tobias Fiebig wrote:
Heho,
The documentation for sieve is here:
https://doc.dovecot.org/configuration_manual/sieve/configuration/
Sieve is its own script language for mail filtering. Once you
configured it, you can either use pidgeonhole/managesieve to edit
the
sieverc, or just write one to the right path on your server.
You are looking for a sieve script like this (does what you asked
for
for my mail account for a couple of years now.):
"""
require ["variables", "envelope", "fileinto", "subaddress"];
if envelope :matches :detail "to" "*" {
set :lower "name" "${1}";
}
if string :is "${name}" "" {
fileinto "INBOX";
stop;
} else {
fileinto "delimiters.${name}";
stop;
}
"""
With best regards,
Tobias
On Sun, 2023-04-09 at 22:21 +0200, Benjamin Stürz wrote:
Hello Michael,
Thanks for helping me!
I too use dovecot, but I'm not really familiar with it.
That's why I took most of my config from a tutorial.
As far as I can tell, I have to put something like this into my
config:
protocol lmtp {
mail_plugins = $mail_plugins sieve
}
But how do I connect it with my script?
I'm thinking of using a script like this:
#!/bin/sh
# Usage: $0 user[+tag]@domain.tld
# user[+tag]
user_tag=$(echo "$1" | cut -d@ -f1)
# domain.tld
domain=$(echo "$1" | cut -d@ -f2)
# user
user=$(echo "${user_tag}" | cut -d+ -f1)
# [tag]
tag=$(echo "${user_tag}" | cut -d+ -f2)
prefix="/var/vmail/${domain}/${user}"
[ "$tag" ] && echo "${prefix}/${tag}" || echo "${prefix}/Inbox"
My current /etc/dovecot/local.conf:
auth_mechanisms = plain login
first_valid_uid = 2000
first_valid_gid = 2000
mail_plugin_dir = /usr/local/lib/dovecot
managesieve_notify_capability = mailto
managesieve_sieve_capability = fileinto reject envelope
encoded-
character vacation subaddress comparator-i;ascii-numeric
relational
regex imap4flags copy include variables body enotify
environment
mailbox date index ihave duplicate mime foreverypart
extracttext
imapsieve vnd.dovecot.imapsieve
mbox_write_locks = fcntl
mmap_disable = yes
passdb {
args = scheme=CRYPT username_format=%u
/etc/mail/credentials.dovecot
driver = passwd-file
name =
}
mail_location =
maildir:/var/vmail/%d/%n:INBOX=/var/vmail/%d/%n/Inbox:LAYOUT=fs
namespace inbox {
inbox = yes
mailbox Drafts {
auto = subscribe
special_use = \Drafts
}
mailbox Junk {
auto = subscribe
special_use = \Junk
autoexpunge = 30d
}
mailbox Sent {
auto = subscribe
special_use = \Sent
}
mailbox Trash {
auto = subscribe
special_use = \Trash
}
mailbox Archive {
auto = subscribe
special_use = \Archive
}
}
plugin {
imapsieve_mailbox1_before =
file:/usr/local/lib/dovecot/sieve/report-spam.sieve
imapsieve_mailbox1_causes = COPY
imapsieve_mailbox1_name = Junk
imapsieve_mailbox2_before =
file:/usr/local/lib/dovecot/sieve/report-ham.sieve
imapsieve_mailbox2_causes = COPY
imapsieve_mailbox2_from = Junk
imapsieve_mailbox2_name = *
sieve = file:~/sieve;active=~/.dovecot.sieve
sieve_global_extensions = +vnd.dovecot.pipe
+vnd.dovecot.environment
sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve
sieve_plugins = sieve_imapsieve sieve_extprograms
}
protocols = imap sieve
service imap-login {
inet_listener imap {
port = 0
}
}
service managesieve-login {
inet_listener sieve {
port = 4190
}
inet_listener sieve_deprecated {
port = 2000
}
}
ssl_cert = </etc/ssl/mixdown.me.crt
ssl_key = </etc/ssl/private/mixdown.me.key
userdb {
args = username_format=%u
/etc/mail/credentials.dovecot
driver = passwd-file
name =
}
protocol imap {
mail_plugins = " imap_sieve"
}
On 09.04.23 22:00, Michael Breuer wrote:
Hello Benjamin,
what mda do you use? I use dovecot and a sieve script to
process
incoming mail.
Instead of saving mail directly to maildir, I transfer it to
the
mda via lmtp. The required changes on the smtpd site would look
like this:
On 9. Apr 2023, at 16:04, Benjamin Stürz
<benni+open...@stuerz.xyz> wrote:
I think this line has to be changed:
action "domain_mail" maildir
"/var/vmail/%{dest.domain:lowercase}/%{dest.user:lowercase|st
rip}
/Inbox" virtual <virtuals>
action "domain_mail" lmtp "/var/dovecot/lmtp" virtual
<virtuals>
In dovecot, you need to activate&configure the sieve plugin and
a
script for your user account.
