does this happen everytime? can you please set the debuglevel to 5 and
addtionally post the output of dmesg here, probably that's an
L1/Wire/Hardware Issue, because the L2 should not be released by any
chance during a call.
Matt Riddell schrieb:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
A customer complained about dropped calls - I couldn't see it happen -
but I just called in and saw it. The console printed out:
P[ 3] MGMT: SSTATUS: L2_RELEASED
P[ 3] MGMT: SSTATUS: L2_ESTABLISH
And then dropped the call when it was ringing. Any ideas?
Here's the full output.
parkview-asterisk*CLI> show dialplan open
[ Context 'open' created by 'pbx_config' ]
'1' => 1. VoiceMail(000|u)
[pbx_config]
's' => 1. Answer(1000)
[pbx_config]
2. Background(reception)
[pbx_config]
3. Dial(${DB(forward/reception)}|20|tT)
[pbx_config]
4. Background(currentlybusy)
[pbx_config]
5. WaitExten(4)
[pbx_config]
6. Goto(open|s|3)
[pbx_config]
parkview-asterisk*CLI>
- -= 2 extensions (7 priorities) in 1 context. =-
P[ 3] handle_frm: frm->addr:42000303 frm->prim:3f082
P[ 3] handle_frm: frm->addr:42000303 frm->prim:30582
P[ 3] set_channel: bc->channel:0 channel:1
P[ 3] I IND :NEW_CHANNEL oad: dad:1033480723
<http://www.snapanumber.com/> pid:235 state:none
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:2 rnumplan: cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:1
P[ 3] --> screen:0 --> pres:1
P[ 3] --> addr:0 l3id:600c8 b_stid:0 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_CLEANED
P[ 3] Chan not existing at the moment bc->l3id:600c8 bc:0x8228fc4
event:NEW_CHANNEL port:3 channel:1
P[ 3] NO USERUESRINFO
P[ 3] --> found chan (preselected): 1
P[ 3] set_chan_in_stack: 1
P[ 3] setup_bc: with dsp
P[ 3] --> Channel is 1
P[ 3] --> TRANSPARENT Mode
P[ 3] I IND :SETUP oad: dad:1033480723 <http://www.snapanumber.com/>
pid:235 state:none
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:2 rnumplan: cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:1
P[ 3] --> screen:0 --> pres:1
P[ 3] --> addr:50010302 l3id:600c8 b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> Bearer: Speech
P[ 3] --> Codec: Alaw
P[ 3] --> Bearer: Speech
P[ 3] --> Codec: Alaw
P[ 0] --> * NEW CHANNEL dad:1033480723 <http://www.snapanumber.com/> oad:
P[ 3] read_config: Getting Config
P[ 3] --> CTON: Unknown
P[ 3] --> EXPORT_PID: pid:235
P[ 3] --> PRES: Restricted (1)
P[ 3] --> SCREEN: Unscreened (0)
P[ 3] * Queuing chan 0x8375d88
P[ 3] I SEND:PROCEEDING oad: dad:0103348072
<http://www.snapanumber.com/>3 pid:235
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 3] --> info_dad: onumplan:0 dnumplan:2 rnumplan: cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:1
P[ 3] --> screen:0 --> pres:1
P[ 3] --> addr:50010302 l3id:600c8 b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] GOT SETUP OK
P[ 3] BCHAN: bchan ACT Confirm pid:235
P[ 3] Sending msg, prim:30280 addr:41000304 dinfo:600c8
[Jan 9 15:54:26] -- Executing [0103348072
<http://www.snapanumber.com/>[EMAIL PROTECTED]:1] NoOp("mISDN/1-u658",
"Reception call") in new stack
[Jan 9 15:54:26] -- Executing [0103348072
<http://www.snapanumber.com/>[EMAIL PROTECTED]:2] Goto("mISDN/1-u658",
"reception|s|1") in new stack
[Jan 9 15:54:26] -- Goto (reception,s,1)
[Jan 9 15:54:26] -- Executing [EMAIL PROTECTED]:1]
Answer("mISDN/1-u658", "1000") in new stack
P[ 3] * ANSWER:
P[ 3] --> Connection is without BF encryption
P[ 3] --> None
P[ 3] --> empty cad using dad
P[ 3] I SEND:CONNECT oad: dad:0103348072 <http://www.snapanumber.com/>3
pid:235
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:0103348072
<http://www.snapanumber.com/>3
P[ 3] --> info_dad: onumplan:0 dnumplan:2 rnumplan: cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:1
P[ 3] --> screen:0 --> pres:1
P[ 3] --> addr:50010302 l3id:600c8 b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] Sending msg, prim:30780 addr:41000304 dinfo:600c8
[Jan 9 15:54:27] -- Executing [EMAIL PROTECTED]:2]
GotoIfTime("mISDN/1-u658", "7:30-21:00|sun-thu|*|*?open|s|1") in new stack
[Jan 9 15:54:27] -- Goto (open,s,1)
[Jan 9 15:54:27] -- Executing [EMAIL PROTECTED]:1] Answer("mISDN/1-u658",
"1000") in new stack
[Jan 9 15:54:27] -- Executing [EMAIL PROTECTED]:2]
BackGround("mISDN/1-u658",
"reception") in new stack
[Jan 9 15:54:27] -- <mISDN/1-u658> Playing 'reception' (language 'en')
P[ 3] MGMT: SSTATUS: L2_ESTABLISH
P[ 3] handle_frm: frm->addr:42000303 frm->prim:30f82
P[ 3] $$$ bc already upsetted stid :10010300 (state:BCHAN_ACTIVATED)
P[ 3] ph_control: c1:2100 c2:0
P[ 3] ec_enable
P[ 3] Sending Control ECHOCAN_ON taps:128
P[ 3] Taps is 128
P[ 3] I IND :CONNECT_ACKNOWLEDGE oad: dad:0103348072
<http://www.snapanumber.com/>3 pid:235 state:CONNECTED
P[ 3] --> channel:1 mode:TE cause:16 ocause:16 rad: cad:0103348072
<http://www.snapanumber.com/>3
P[ 3] --> info_dad: onumplan:0 dnumplan:2 rnumplan: cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:1
P[ 3] --> screen:0 --> pres:1
P[ 3] --> addr:50010302 l3id:600c8 b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] MGMT: SSTATUS: L2_RELEASED
P[ 3] MGMT: SSTATUS: L2_ESTABLISH
[Jan 9 15:54:40] -- Executing [EMAIL PROTECTED]:3] Dial("mISDN/1-u658",
"SIP/000&SIP/001|20|tT") in new stack
[Jan 9 15:54:40] -- Called 000
[Jan 9 15:54:40] -- Called 001
[Jan 9 15:54:40] -- SIP/000-083dcdc8 is ringing
P[ 3] * IND : ringing pid:235
P[ 3] --> * IND : ringing pid:235 but Connected, so just send
TONE_ALERTING without state changes
[Jan 9 15:54:40] -- Got SIP response 486 "Busy Here" back from
192.168.0.157
[Jan 9 15:54:40] -- SIP/001-083f1a60 is busy
P[ 3] MGMT: SSTATUS: L2_RELEASED
P[ 3] MGMT: SSTATUS: L2_ESTABLISH
P[ 3] handle_frm: frm->addr:42000303 frm->prim:35a82
P[ 3] I IND :RELEASE_COMPLETE oad: dad:0103348072
<http://www.snapanumber.com/>3 pid:235 state:CONNECTED
P[ 3] --> channel:1 mode:TE cause:81 ocause:16 rad: cad:0103348072
<http://www.snapanumber.com/>3
P[ 3] --> info_dad: onumplan:0 dnumplan:2 rnumplan: cpnnumplan:0
P[ 3] --> caps:Speech pi:0 keypad: sending_complete:1
P[ 3] --> screen:0 --> pres:1
P[ 3] --> addr:50010302 l3id:600c8 b_stid:10010300 layer_id:50010380
P[ 3] --> facility:Fac_None out_facility:Fac_None
P[ 3] --> bc_state:BCHAN_ACTIVATED
P[ 3] --> queue_hangup
P[ 3] * RELEASING CHANNEL pid:235 ctx:open dad:s oad: state: CLEANING
P[ 3] --> * State Down
P[ 3] --> Setting AST State to down
P[ 3] $$$ CLEANUP CALLED pid:235
P[ 3] $$$ Cleaning up bc with stid :10010300 pid:235
P[ 3] --> ec_disable
P[ 3] Sending Control ECHOCAN_OFF
P[ 3] ph_control: c1:2319 c2:0
P[ 3] empty_chan_in_stack: 1
P[ 3] handle_frm: frm->addr:42000303 frm->prim:3f182
P[ 3] --> lib: RELEASE_CR Ind with l3id:600c8
P[ 3] --> lib: CLEANING UP l3id: 600c8
P[ 3] $$$ CLEANUP CALLED pid:235
P[ 3] BCHAN: MGR_DELLAYER|CNF pid:235
[Jan 9 15:54:52] == Spawn extension (open, s, 3) exited non-zero on
'mISDN/1-u658'
- --
Kind Regards,
Matt Riddell
Director
_______________________________________________
http://www.venturevoip.com (Great new VoIP end to end solution)
http://www.venturevoip.com/news.php (Daily Asterisk News - html)
http://www.venturevoip.com/newrssfeed.php (Daily Asterisk News - rss)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHhDu+DQNt8rg0Kp4RAjuCAKCc2FyJk1V09hltp0+xttnb9iKfcwCcCcpn
ddJVKxi01pC9OwaVRuW1srg=
=5z/L
-----END PGP SIGNATURE-----
_______________________________________________
Misdn-asterisk mailing list
[email protected]
http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
_______________________________________________
Misdn-asterisk mailing list
[email protected]
http://lists.beronet.com/cgi-bin/mailman/listinfo/misdn-asterisk
