Hi, I used version 2013.12 and I added PATH from .bat files and MITK Workbench works. My next step was to use the Plugin generator. The Application builds OK and I am able to run it, but building of one target fails. I think the problem must be in the output below (part of the compiler output). Does it mean that it is something wrong with the downloaded library 'tinyxml'?
Best, Urban 2> CustomBuild: 2> Building Custom Rule C:/MITK/sb/MITK/CMakeLists.txt 2> CMake does not need to re-run because C:\MITK\sb\MITK-superbuild\CMakeFiles\generate.stamp is up-to-date. 2> Creating directories for 'tinyxml' 2> Performing download step (download, verify and extract) for 'tinyxml' 2> -- downloading... 2> src='http://mitk.org/download/thirdparty/tinyxml_2_6_2.tar.gz' 2> dst='C:/MITK/sb/MITK-superbuild/tinyxml-cmake/src/tinyxml_2_6_2.tar.gz' 2> timeout='none' 2> CMake Error at tinyxml-cmake/src/tinyxml-stamp/download-tinyxml.cmake:9 (file): 2> file DOWNLOAD HASH mismatch 2> for file: [C:/MITK/sb/MITK-superbuild/tinyxml-cmake/src/tinyxml_2_6_2.tar.gz] 2> expected hash: [c1b864c96804a10526540c664ade67f0] 2> actual hash: [d41d8cd98f00b204e9800998ecf8427e] On 19.1.2014 13:27, Sascha Zelzer wrote: > Hi Urban, > > just as a side note: The VTK library path issue Stefan mentioned > applies to the current MITK master only. Unless you have good reasons > to use the MITK master, you should be using the latest MITK release > (which would be 2013.12). The batch files generated when configuring > the 2013.12 sources are complete and should "just work". > > Best, > Sascha > > On 18/01/2014 21:47, Urban Simoncic wrote: >> Hi, >> >> thanks for all the info on building process. Now I can run the MITK >> Workbench that I build myself and I should be ready to start >> experimenting with the code. >> >> Best, >> Urban >> >> On 18.1.2014 16:19, Kislinskiy, Stefan wrote: >>> Hi, >>> >>> there are batch files in the build directory of MITK named >>> StartVS_debug.bat and StartVS_release.bat which set up all paths >>> either for debug or release mode. Currently they doesn't include the >>> VTK path which will be fixed by the next VTK release. Until then you >>> must manually add the VTK path. Since every CMake run will reset the >>> batch files I recommend to copy the complete "PATH=..." line into a >>> separate text file, replace "debug" or "release" by >>> "$(Configuration)" or "$(ConfigurationName)" in case of VS2008, and >>> copy the modified line right into the project settings of the >>> mitkWorkbench (Project Settings->Configuration >>> Properties->Debugging->Environment). Ensure that you selected both >>> debug and release mode at the top of the dialog to apply the >>> settings to all configurations. This way you don't need the batch >>> files at all and can use the MITK solution file directly. The >>> project settings are not overwritten by CMake. Don't forget to add >>> the VTK path as well. >>> >>> Cheers, >>> Stefan >>> ________________________________________ >>> Von: Urban Simoncic [[email protected]] >>> Gesendet: Freitag, 17. Januar 2014 21:39 >>> An: Kislinskiy, Stefan; Zelzer, Sascha; >>> [email protected] >>> Betreff: Re: AW: [mitk-users] Build error >>> >>> Hi, >>> thanks for that advice. I have been able to build the application with >>> MSVC 2010 Express and Windows SDK. After manually setting the Path for >>> some dll's, the MITK Workbench starts a command line window and runs >>> something and then ends. I can't read what is going on there. Does the >>> MITK Workbench stop because not all shared libraries are in Path? Is >>> there any automated way to set the Path for all the shared libraries? >>> >>> Best, >>> Urban >>> >>> On 17.1.2014 14:32, Kislinskiy, Stefan wrote: >>>> As an addition I would like to say that we support MSVC 2010 and >>>> 2012 as well. However, to get things up and running with MSVC 2012 >>>> you need to patch and compile Qt manually. Personally I would >>>> recommend MSVC 2010 which is more feature rich in its Express >>>> edition than MSVC 2008. In any case, it you use an express edition >>>> you should always install the Windows SDK as well. >>>> >>>> -----Ursprüngliche Nachricht----- >>>> Von: Sascha Zelzer [mailto:[email protected]] >>>> Gesendet: Freitag, 17. Januar 2014 14:17 >>>> An: [email protected]; Kislinskiy, Stefan; >>>> [email protected] >>>> Betreff: Re: [mitk-users] Build error >>>> >>>> Hi Urban, >>>> >>>> The documentation is up-to-date and VS2008 SP1 is supported. >>>> However, we are using the professional version and do not test >>>> regularly with the express edition (the documentation lacks in that >>>> respect). >>>> >>>> Please try to find the "mc.exe" executable on your system (the >>>> "message compiler"). Maybe the express edition does not ship it. It >>>> is probably included in some Windows SDK as an extra download. If >>>> you do have it installed, you could help Poco find the mc.exe by >>>> pointing CMAKE_MC_COMPILER within the Poco CMake configuration to >>>> its path. >>>> >>>> Best, >>>> Sascha >>>> >>>> On 01/17/2014 02:03 PM, Urban Simoncic wrote: >>>>> Hi Stefan, >>>>> >>>>> thank you for quick response. I have MSVC2008 with SP1 - see the >>>>> attached image to determine what I have. Can I use the newer MSVC? I >>>>> installed MSVC2008 just because the documentation claims support for >>>>> MSVC2008 SP1. If that is outdated, please let me know which MSVC and >>>>> Qt shall I use (possibly MSVC Express edition that is free). >>>>> >>>>> Best, >>>>> Urban >>>>> >>>>> On 17.1.2014 13:34, Kislinskiy, Stefan wrote: >>>>>> Hi Urban, >>>>>> >>>>>> The CMake configuring of PocoFoundation fails: >>>>>> >>>>>> 4>CMake Error at Foundation/CMakeLists.txt:18 (message): >>>>>> 4> message compiler not found: required to build >>>>>> 4>-- Configuring incomplete, errors occurred! >>>>>> >>>>>> You might want to have a look at >>>>>> Poco-build/Foundation/CMakeLists.txt. There is a comment that >>>>>> states VS2008+ is needed. Do you already installed the Service >>>>>> Pack for VS2008? >>>>>> >>>>>> Cheers, >>>>>> Stefan >>>>>> ________________________________________ >>>>>> Von: Urban Simoncic [[email protected]] >>>>>> Gesendet: Freitag, 17. Januar 2014 13:06 >>>>>> An: [email protected] >>>>>> Betreff: [mitk-users] Build error >>>>>> >>>>>> Hi, >>>>>> >>>>>> I am trying to build the MITK for a few days, without much success. >>>>>> Because I don't know much about the MITK code, I have hard time to >>>>>> locate the error from the compiler output. So, I am sending the >>>>>> output of the compiler, hoping that someone can tell me what I am >>>>>> doing wrong. >>>>>> >>>>>> Thank you, >>>>>> Urban >>>>>> PS: I am working on Win 7 64 bit, using MSVC 2008 Express. >>>>>> >>>>>> >>>>>> >> > > > ------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk _______________________________________________ mitk-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mitk-users
