Hi Wyane,
the fiber bundles are allways in the space of DWI since they are derived from
it.
Since DWI and T1/T2 often do not match you need to register them, currently the
easiest way doing this with GUI is
(AFAIK ):
Extract B0 image from the DWI and then register the T1 to this B0 image,
using e.g. the Point-Based registration.
Best,
Christian
From: Wayne Su [mailto:[email protected]]
Sent: Donnerstag, 10. April 2014 20:10
To: [email protected]
Subject: [mitk-users] Save Fiber bundle
Hello experts,
Is there a way to save diffusion fiber bundle onto T1 structural space or DWI
space, i.e. the dimension of the fiber bundle is the same as the one from T1 or
DWI? Currently, it saves as reduced dimension with 1mmx1mmx1mm spacing. I tried
to load the track file into TrackVis along with T1 image. But the locations of
them don't match.
Thanks,
Wayne
------------------------------------------------------------------------------
Put Bad Developers to Shame
Dominate Development with Jenkins Continuous Integration
Continuously Automate Build, Test & Deployment
Start a new project now. Try Jenkins in the cloud.
http://p.sf.net/sfu/13600_Cloudbees
_______________________________________________
mitk-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mitk-users
