Hello Amir,
Thank you for your fast reply! Yes, I used the “Reinit”-action from the
node’s context menu to reinitialize the MRI node.
Now I understand it won't work like this.
I tested what you say about changing the view direction of the MRI with the
radio buttons and it works! :)
Thank you very much again!
Best regards,
Rocío
2018-06-28 10:17 GMT+02:00 Kalali, Amir <a.kal...@dkfz-heidelberg.de>:
> Hey again,
>
>
>
> great that you were able to use the RenderWindowManager to load different
> images into different render windows.
>
> As mentioned before, the US and the MRI image might be located in
> different positions in the world coordinate system, that’s why you won’t be
> able to see both at the same time. The idea is now to initialize the render
> windows differently, so that they do not show the same field of view.
>
>
>
> You tried to do this by reinitializing the MRI node, but then the US image
> is not visible anymore? Did you use the “Reinit”-action from the node’s
> context menu? This will not work, since this action reinitializes all known
> render windows to this node (same goes for the “Reset view” in the render
> window menu).
>
>
>
> What you can try is changing the view direction (by using the radio
> buttons at the bottom of the render window manager view – just change them
> to any other view direction and change back to the view direction you would
> like to see). This should reinitialize only the selected render window
> (selected in the combo box at the top of the render window manager view)
> with the geometry bounds of the loaded image in this render window.
>
>
>
> Best,
>
>
>
> Amir
>
>
>
> *From:* LOPEZ VELAZCO, ROCIO [mailto:rocio.lo...@upf.edu]
> *Sent:* Wednesday, 27 June, 2018 18:03
> *To:* Kalali, Amir
> *Cc:* mitk-users@lists.sourceforge.net
> *Subject:* Re: [mitk-users] Update different QmitkStdMultiWidget in same
> app
>
>
>
> Ok, I fixed it. There was somewhere in the code a call to a global
> initialize vews...
>
> But the second part of the email remains unanswered:
>
> I also had a deep look at the RenderWindowManager Plugin (and module) and
> I was not able to achieve what I want.
>
> Workbench Example: I load a MRI, a US and a US_Doppler images to the
> Workbench. I would like to show in the differnet renders:
>
> - In the red (Axial) render: US axial view
> - In the green (Sagittal) render: US_Doppler axial view
> - In the blue (coronal) render: MRI axial view
>
> By using RenderWindowManagerPlugin I was able to place each image in each
> render, however if US images are shown (which are similar in geometry), I
> can't see the MRI image. So I do a MRI Node Reinit and MRI is shown but not
> the US images... I am not able to see all of them together at the same time!
> Is there any way to solve this? or what would be the direction?
>
> Any inspiration would be very helpful!
>
>
>
> Thank you very much in advance,
>
> Best regards,
>
> Rocío
>
>
> --
>
> Rocío López Velazco
>
> *SimbioSYS group, BCN MedTech*
>
> *UniversityPompeu Fabra*
>
> *Department of Information and Communication Technologies *
>
> *Roc Boronat, 122
> <https://maps.google.com/?q=Roc+Boronat,+122&entry=gmail&source=g> (Tànger
> Building), 08018 Barcelona Office 55 119 *
> *https://bcn-medtech.upf.edu/ <https://bcn-medtech.upf.edu/>*
>
>
>
>
>
--
Rocío López Velazco
*SimbioSYS** group, BCN MedTech*
*UniversityPompeu Fabra*
*Department of Information and Communication Technologies Roc Boronat, 122
(Tànger Building), 08018 Barcelona Office 55 119
https://bcn-medtech.upf.edu/ <https://bcn-medtech.upf.edu/>*
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
mitk-users mailing list
mitk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mitk-users
