Linux video capture interface: v1.00 i2c: initialized Zoran ZR36060 + ZR36057/67 MJPEG board driver version 0.7 PCI: Found IRQ 11 for device 00:0a.0 IRQ routing conflict for 00:0a.0, have irq 10, want irq 11 MJPEG[0]: Zoran ZR36067 (rev 2) irq: 10, memory: 0xe0000000 MJPEG[0]: subsystem vendor=0x1031 id=0xd801 MJPEG[0]: Changing PCI latency from 64 to 32. MJPEG[0]: Initializing i2c bus... MJPEG[0]: Card not supported No known MJPEG cards found.
When I run the xawtv for example fails, to start with the message:
This is xawtv-3.91, running on Linux/i586 (2.4.22-1.2115.nptl) can't open /dev/video0: No such device v4l-conf had some trouble, trying to continue anyway v4l2: open /dev/video0: No existe tal dispositivo v4l2: open /dev/video0: No existe tal dispositivo v4l: open /dev/video0: No existe tal dispositivo no video grabber device available
It is necesary to download and compile the unified zoran driver 0.94?, or the kernel just include into it?. And, what about the /etc/modules.conf? .May I need to make some extra modifications?. Here it is the content of the file:
alias eth0 ne
alias char-major-81 zr36067
alias sound-slot-0 es1371
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
---
If tried the command: modprobe zoran, but I got the error in /var/log/messages: "Can't locate module char-major-81-0"
Thanks in advance for any suggestions.
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
