Hej Moshe ! Do you encode the MPEG video only stream yourself, or do you use the HDTV code stream that was transmitted ? (put differently: is mpeg2enc involved at all ? ). You can upload some samples, but I am currently too busy to promise any testing ... maybe someone on mjpeg-users can help you nail down the problem ? :-)
> Thanks for the help. However, I have tried the -f 3 option with the same > results. Also, just tried -r with manual setting and the same thing. > These are high definition streams captured from HD channels (from TV). I can > send you a sample (or upload some samples to usenet maybe) to look at. > THanks > > -----Original Message----- > From: Gernot Ziegler [mailto:[EMAIL PROTECTED] > Sent: Saturday, September 11, 2004 12:56 PM > To: Moshe Imel > Subject: RE: Mplex 2.2.2 (fwd) > > Hej Moshe ! > > Sorry, have no quick solution ... > > I suspect that you are overloading the SVCD output profile when using a 14 > MBit stream ... how did you encode the MPEG2 video stream ? - maybe -f 3 > or a manual -r settings helps ? > > Servus, > Gernot > > -- > T----------------------------W-E-L-C-O-M-E------------------------------T > | The Austria <=> Sweden <=> Germany connection..... H > O http://www.mpi-sb.mpg.de/~gziegler | http://lysator.liu.se/~gz E > \------------------------------F-U-T-U-R-E------------------------------/ > > ---------- Forwarded message ---------- > Date: Fri, 10 Sep 2004 18:31:54 -0400 > From: Moshe Imel <[EMAIL PROTECTED]> > To: 'Gernot Ziegler' <[EMAIL PROTECTED]> > Subject: RE: Mplex 2.2.2 > > Ok, here is the whole output > > E:\temp>mplex -r 0 -l 180 -f 5 -o tt.mpg tt-xport1.m2v tt.dts.fixed.dts > INFO: [???] mplex version 2.2.2 ($Date: 2003/05/13 20:27:15 $) > INFO: [???] File tt-xport1.m2v looks like an MPEG Video stream. > INFO: [???] File tt.dts.fixed.dts looks like a dts Audio stream. > INFO: [???] Found 1 audio streams and 1 video streams > INFO: [???] Selecting SVCD output profile > INFO: [???] Multiplexing video program stream! > INFO: [???] Scanning for header info: Video stream e0 (tt-xport1.m2v) > INFO: [???] VIDEO STREAM: e0 > INFO: [???] Frame width : 1920 > INFO: [???] Frame height : 1080 > INFO: [???] Aspect ratio : 16:9 display > INFO: [???] Picture rate : 29.970 frames/sec > INFO: [???] Bit rate : 14800000 bits/sec > INFO: [???] Vbv buffer size : 999424 bytes > INFO: [???] CSPF : 0 > INFO: [???] Scanning for header info: dts Audio stream 00 > (tt.dts.fixed.dts) > INFO: [???] dts frame size = 1006 > > INFO: [???] dts AUDIO STREAM: > INFO: [???] Bit rate : 98304 bytes/sec (768 kbit/sec) > INFO: [???] Frequency : 48000 Hz > INFO: [???] SYSTEMS/PROGRAM stream: > INFO: [???] rough-guess multiplexed stream data rate : 15821448 > INFO: [???] Setting best-guess data rate. > INFO: [???] Run-in Sectors = 78 Video delay = 8249 Audio delay = 0 > INFO: [???] Multiplexed stream will be ended at 180 seconds playback time > > INFO: [???] New sequence commences... > INFO: [???] Video e0: buf= 235520 frame=000000 sector=00000000 > INFO: [???] Audio bd: buf= 16384 frame=000000 sector=00000000 > ++ WARN: [???] Stream e0: data will arrive too late sent(SCR)=6067041 > required(D > TS)=0 > ++ WARN: [???] Video e0: buf= 233219 frame=001620 sector=00013505 > ++ WARN: [???] Audio bd: buf= 1294 frame=006320 sector=00003160 > ++ WARN: [???] Stream e0: data will arrive too late sent(SCR)=8299639 > required(D > TS)=0 > ++ WARN: [???] Video e0: buf= 85965 frame=002220 sector=00026030 > ++ WARN: [???] Audio bd: buf= 15378 frame=008632 sector=00004316 > ++ WARN: [???] Stream e0: data will arrive too late sent(SCR)=8410793 > required(D > TS)=0 > ++ WARN: [???] Video e0: buf= 157414 frame=002252 sector=00026870 > ++ WARN: [???] Audio bd: buf= 9342 frame=008754 sector=00004377 > ++ WARN: [???] Stream e0: data will arrive too late sent(SCR)=8622631 > required(D > TS)=0 > ++ WARN: [???] Video e0: buf= 233219 frame=002310 sector=00028411 > ++ WARN: [???] Audio bd: buf= 1294 frame=008982 sector=00004491 > ++ WARN: [???] Stream e0: data will arrive too late sent(SCR)=8735266 > required(D > TS)=0 > ++ WARN: [???] Video e0: buf= 233224 frame=002341 sector=00029180 > ++ WARN: [???] Audio bd: buf= 1294 frame=009100 sector=00004550 > ++ WARN: [???] Stream e0: data will arrive too late sent(SCR)=8847795 > required(D > TS)=0 > ++ WARN: [???] Video e0: buf= 233219 frame=002370 sector=00029943 > ++ WARN: [???] Audio bd: buf= 2300 frame=009216 sector=00004608 > ++ WARN: [???] Stream e0: data will arrive too late sent(SCR)=9073064 > required(D > TS)=0 > ++ WARN: [???] Video e0: buf= 233219 frame=002430 sector=00031396 > ++ WARN: [???] Audio bd: buf= 3306 frame=009450 sector=00004725 > INFO: [???] STREAM e0 completed @ frame 4405. > INFO: [???] STREAM bd completed @ frame 16875. > INFO: [???] Multiplex completion at SCR=16201092. > INFO: [???] Video e0: buf= 74864 frame=004405 sector=00073422 > INFO: [???] Audio bd: buf= 2300 frame=016875 sector=00008438 > INFO: [???] VIDEO_STATISTICS: e0 > INFO: [???] Video Stream length: 168755103 bytes > INFO: [???] Sequence headers: 142 > INFO: [???] Sequence ends : 0 > INFO: [???] No. Pictures : 4406 > INFO: [???] No. Groups : 142 > INFO: [???] No. I Frames : 157 avg. size125370 bytes > INFO: [???] No. P Frames : 2047 avg. size 38615 bytes > INFO: [???] No. B Frames : 2203 avg. size 31786 bytes > INFO: [???] Average bit-rate : 7497200 bits/sec > INFO: [???] Peak bit-rate : 15048000 bits/sec > INFO: [???] BUFFERING min 16 Buf max 233229 > INFO: [???] AUDIO_STATISTICS: bd > INFO: [???] Audio stream length 16977256 bytes. > INFO: [???] Syncwords : 16876 > INFO: [???] Frames : 16876 padded > INFO: [???] Frames : 0 unpadded > INFO: [???] BUFFERING min 1294 Buf max 14372 > **ERROR: [???] MUX STATUS: Frame data under-runs detected! > > -----Original Message----- > From: Gernot Ziegler [mailto:[EMAIL PROTECTED] > Sent: Friday, September 10, 2004 6:10 PM > To: Moshe Imel > Cc: [EMAIL PROTECTED]; MJPEG/Linux users list > Subject: Re: Mplex 2.2.2 > > Hej ! > > Which error message do you get ? > I have mux:ed weird formats like 2160x576 before and that worked fine, > using the -f 3 tag - but your mileage may vary ... > > > Hey Gents, I have been using the latest version of Mplex to mux high > > definition resolution video with DTS audio. Unfortunately, it looks like a > I > > need a high definition profile in Mplex to make this work. Any chance of > > getting this coded into the next version of Mplex? Thanks > > > > Servus, > Gernot > > -- > T----------------------------W-E-L-C-O-M-E------------------------------T > | The Austria <=> Sweden <=> Germany connection..... H > O http://www.mpi-sb.mpg.de/~gziegler | http://lysator.liu.se/~gz E > \------------------------------F-U-T-U-R-E------------------------------/ > > > > > Servus, Gernot -- T----------------------------W-E-L-C-O-M-E------------------------------T | The Austria <=> Sweden <=> Germany connection..... H O http://www.mpi-sb.mpg.de/~gziegler | http://lysator.liu.se/~gz E \------------------------------F-U-T-U-R-E------------------------------/ ------------------------------------------------------- This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
