On Thu, Nov 25, 2004 at 12:01:29PM +0000, Anne Wilson wrote: Subject: [Mjpeg-users] Audio ring buffer overflow in lavrec
> This section of input has a rather high volume. I tried recording > with > > lavrec -f a -i P -d 2 -q 80 -s -l 60 -R l -U filename.avi > > and have tried dropping -l to 40, but I can run for around 5 > seconds then it drops out with the above error. > > What's wrong, and what do I need to do about it, please? Audio ring buffer overflow is related to rate, not volume. That message generally means that you have capture data coming in from the capture card at a speed higher than what your hard drive can write to disk. However it's kind of hard to believe you would have a disk I/O speed problem on a reasonably modern system at decimation 2 and quality 80 if you have a hardware mjpeg capture card, unless you have a bunch of background disk I/O going on that you are not telling us about. You might try dropping the (-U) to see if it helps, but I suspect there's something else afoot somewhere causing the trouble. ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users
