On Mon, 7 Mar 2005 23:44:49 +0000
David Robinson <[EMAIL PROTECTED]> hit the keyboard and punched:
> > Zoran MJPEG board driver version 0.9.5
> > PCI: Found IRQ 11 for device 0000:00:0a.0
> > MJPEG[0]: Zoran ZR36057 (rev 1) irq: 11, memory: 0xefffe000.
> > DC30[0]: Changing PCI latency from 64 to 48.
> > DC30[0]: Initializing i2c bus...
> > DC30[0]: i2c_client_register() - driver id = 42
> > DC30[0]: Initializing videocodec bus...
> > DC30[0]: jpeg_codec_sleep() - sleep GPIO=0x81008888
> > DC30[0]: jpeg_codec_sleep() - wake GPIO=0x85008888
> > zr36050: initializing MJPEG subsystem #0.
> > zr36050[0]: writing 0x00 to 0x0040
> > zr36050[0]: writing 0x00 to 0x0041
> > zr36050[0]: reading from 0x0040: ff
> > zr36050[0]: reading from 0x0041: ff
> > zr36050[0]: attach failed, can't connect to jpeg processor!
> > zr36050[0]: finished codec #0
> > DC30[0]: find_zr36057() - no codec found
> > DC30[0]: i2c_client_unregister()
> > No known MJPEG cards found.
>
> Just giving this a nudge to see if there's any progress or other
> things I should be trying.
Hi David,
I've just finished (somewhat) installing Gentoo on a P3/800Mhz with a
Pinnacle/Miro DC30 Plus. Kernel is gentoo-modified 2.6.10. I really don't
know much about this, but after a few fiddles and recompiles with the
kernel selecting differend modules it all seems to work. I never use
"modprobe zoran" or anything like that. I have coldplug installed and
starting with default runlevel. Everything just works. Well, works...
actually I don't know about that. Haven't really tested it yet, but at
least I get the device nodes setup:
htpc root # ls -l /dev/video*
lr-xr-xr-x 1 root root 6 Mar 8 00:46 /dev/video -> video0
lr-xr-xr-x 1 root root 10 Mar 8 00:26 /dev/video0 -> v4l/video0
htpc root # ls -l /dev/v4l/
total 0
crw-rw---- 1 root video 81, 0 Jan 1 1970 video0
htpc root #
Maybe I created the /dev/video symlink myselft for testing purposes,
I don't remember.
I don't know what I can do to help you? But I'll gladely share any
information about setup if you just tell me what to look for :-)
To start with, I'll post my dmesg:
htpc root # dmesg
ommit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
Adding 257032k swap on /dev/hda2. Priority:-1 extents:1
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:09.0: 3Com PCI 3c905C Tornado at 0xe800. Vers LK1.1.19
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: AGP aperture is 64M @ 0xd0000000
parport_pc: Ignoring new-style parameters in presence of obsolete ones
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
parport_pc: VIA parallel port: io=0x378, irq=7
i2c_adapter i2c-0: registered as adapter #0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Via IRQ fixup for 0000:00:07.5, from 9 to 11
PCI: Setting latency timer of device 0000:00:07.5 to 64
Linux video capture interface: v1.00
Linux video codec intermediate layer: v0.2
Zoran MJPEG board driver version 0.9.5
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 5 (level, low) -> IRQ 5
MJPEG[0]: Zoran ZR36067 (rev 2) irq: 5, memory: 0xd9001000
MJPEG[0]: subsystem vendor=0x1031 id=0xd801
i2c-core: driver vpx3220 registered.
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 43
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 47
i2c-core: driver adv7175 registered.
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 2a
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 2b
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6a
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 6b
i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 43
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 47
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: master_xfer: with 2 msgs.
i2c_adapter i2c-1: master_xfer: with 2 msgs.
i2c_adapter i2c-1: master_xfer: with 2 msgs.
i2c_adapter i2c-1: client [vpx3220a[0]] registered to adapter
registering 1-0047
i2c_adapter i2c-1: master_xfer: with 1 msgs.
[ _really lots of these messages_ ]
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 2a
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 2b
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: client [adv7176[0]] registered to adapter
registering 1-002b
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: master_xfer: with 2 msgs.
i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 6a
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: found normal i2c entry for adapter 1, addr 6b
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: registered as adapter #1
ZORAN: 1 card(s) found
DC30plus[0]: zr36057_init() - initializing card[0], zr=c9354ac0
i2c_adapter i2c-1: master_xfer: with 1 msgs.
i2c_adapter i2c-1: master_xfer: with 1 msgs.
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 2940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:6): 20.000MB/s transfers (20.000MHz, offset 15)
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
sr0: scsi3-mmc drive: 16x/40x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 6, lun 0, type 5
htpc root #
I've cut out a big bunch of messages like this:
i2c_adapter i2c-1: master_xfer: with 1 msgs.
Dunno what they are from, maybe I said debug=1 somewhere...
lspci maybe?
htpc root # lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 1b)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 0e)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 0e)
0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
ACPI] (rev 20)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686
AC97 Audio Controller (rev 21)
0000:00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 74)
0000:00:0b.0 Multimedia video controller: Zoran Corporation ZR36057PQC
Video cutting chipset (rev 02)
0000:00:0c.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro
AGP 1X/2X (rev 5c)
htpc root #
How about an lsmod?
htpc root # lsmod
Module Size Used by
snd_pcm_oss 48804 0
snd_mixer_oss 17792 1 snd_pcm_oss
snd_seq_oss 31744 0
snd_seq_midi_event 6016 1 snd_seq_oss
snd_seq 47760 4 snd_seq_oss,snd_seq_midi_event
aic7xxx 208728 0
zr36016 6024 1
zr36050 9352 1
adv7175 5896 0
vpx3220 7816 0
zr36067 133052 0
videocodec 7444 3 zr36016,zr36050,zr36067
videodev 7552 1 zr36067
snd_via82xx 22944 0
snd_ac97_codec 73440 1 snd_via82xx
snd_pcm 83208 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 20484 2 snd_seq,snd_pcm
snd_page_alloc 7812 2 snd_via82xx,snd_pcm
gameport 3712 1 snd_via82xx
snd_mpu401_uart 6144 1 snd_via82xx
snd_rawmidi 19360 1 snd_mpu401_uart
snd_seq_device 7052 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 46180 11
snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_via82xx,snd_ac97_codec,
snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
i2c_viapro 6540 0
parport_pc 30404 0
parport 31688 1 parport_pc
via_agp 7680 1
agpgart 28456 1 via_agp
3c59x 36392 0
sata_via 5892 0
sata_svw 5252 0
sata_sil 6020 0
sata_promise 7940 0
libata 40068 4 sata_via,sata_svw,sata_sil,sata_promise
sbp2 21512 0
ohci1394 31108 0
ieee1394 92980 2 sbp2,ohci1394
ohci_hcd 19208 0
uhci_hcd 30480 0
usb_storage 28160 0
usbhid 30272 0
ehci_hcd 27524 0
usbcore 104440 6
ohci_hcd,uhci_hcd,usb_storage,usbhid,ehci_hcd
htpc root #
Any my /etc/shadow
htpc etc # cat shadow
root:$1... just kidding ;-)
--
Rickard
.--. .--.
.----------------------------------------. | | | | .-.
| Rickard Borgm�ster | | | | |/ /
| [EMAIL PROTECTED] | .-^ | .--. | <
| http://doktorn.sub.nu/ | ( o | ( () ) | |\ \
`----------------------------------------' `-----' `--' `--' `--'
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Mjpeg-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mjpeg-users
