Josh, If you are metering the current to the DPR and the needle is bouncing, then the O2 is usually good. A steady reading indicates a bad O2 - usually.
Sounds to me like you have a vaccuum leak. Although I could be wrong. Never hurts to check though. Rich Blake 88GTi16v > -----Original Message----- > From: [email protected] > [mailto:[email protected]]On Behalf Of > [email protected] > Sent: Thursday, March 27, 2003 8:21 PM > To: [email protected] > Subject: [a2-16v-list] car runs better once you unplug the DPR??? WTF??? > > > motronic..... high idle untill you unplug the DPR then > it drops to about normal > > Ok, so the full throtle switch takes the O2 out of the > equation correct? > I set the DPR voltage to set it to 2.5, then the next > week it got funky on me. I think maybe it is rich and > killed the O2? > > It started acting funky at the track after I shut it > off and restarted it. > > Then I drove it home and it would only run 'right' if I > had it floored.....part throtle was all ****ed up. > > I'm going to install a new O2 and reset the mixture and > see if that fixes it. Def NOT going 2.5 this time, > prolly go 4..... > _______________________________________________ > a2-16v-list mailing list > [email protected] > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > For list archives, see listinfo link above. >
