Where do you live? If it's in the LA area I have a place for you. I had similar problems with those bolts. All 4 were busted, but I was able to fix all but 1. If the one that's screwed up is on the bottom you can probably get by with 3. If it's a top you need to fix it. Let me know if you want that place in LA (Santa Ana actually). Greg ----- Original Message ----- From: "Chad Rebuck" <[email protected]> To: "16v" <[email protected]> Sent: Monday, September 08, 2003 9:35 AM Subject: [a2-16v-list] removing broken bolt
> So I decide to replace the water pump on my 90 16v... One of the 4 bolts > that secures the water pump to the block has snapped, leaving only about a > 1/4" exposed. I've tried liquid wrench, smacking the bolt with a hammer, > and propane torch all while trying to just get the bolt to break loose > with the vice grips. I gave up and attempted to drill it out and use a > heli-coil, but my small "starter" cobalt bit broke off in the bolt, so now > it is impossible to drill. > > Any suggestions before I replace the block? There has to be some fitting > for my dremel or air grinder that could get through the bit in the bolt. > I am going to do some searches on the web to see what I can find. > > Chad > > _______________________________________________ > a2-16v-list mailing list > [email protected] > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > For list archives, see listinfo link above. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.515 / Virus Database: 313 - Release Date: 9/1/03
