Anyone correct me if I'm wrong.... 1. Engine oil temp sensor G/BK is the oil temp sensor is on the oil filter housing? my green/black wire is on the back of the head.
2. Engine oil press sw 0.3 bar BL/BK my blue/black is located near the oil filter housing., I thought the low pressure switch was on the back of the head. 3. Engine oil press sw 1.8 bar Y my Yellow is located on the oil filter housing. The yellow wire hooks up to the black oil press. switch? 4. Coolant temp send unit Y/R This one is right! ----- Original Message ----- From: "Galen Bergthold" <[email protected]> To: <[email protected]> Sent: Friday, October 22, 2004 8:12 PM Subject: RE: [a2-16v-list] A few Wiring Questions > From the Bentley, p.226 fora 91-92 Jetta GLI, German production: > Engine oil temp sensor G/BK > Engine oil press sw 0.3 bar BL/BK > Engine oil press sw 1.8 bar Y > Coolant temp send unit Y/R > > > >From: "Mark Reda" <[email protected]> > >To: "a2list" <[email protected]> > >Subject: [a2-16v-list] A few Wiring Questions > >Date: Fri, 22 Oct 2004 18:08:05 -0400 > > > >I'm putting the head back on my 16V and I'm having a hard time figuring out > >which wires connect to a few senders on a 9A with CIS-E Motronic (91 > >GTX)..... > > > >Which colour wires are for the.... > >1. Black oil pressure sender on the oil filter housing > >2. MFA temp sender on the oil filter housing > >3. Coolant gauge temp sender on the side of the block under the distributor > >4. Blue oil pressure sender on back of the head > > > >Thanks, > >Mark. > >_______________________________________________ > >a2-16v-list mailing list > >[email protected] > >http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > >For list archives, see listinfo link above. > > >
