Mark Burton wrote: > Hi Mark, > >> Sorry forgot to add that bit. I'm using splitter on the UK extracts from >> geofabrik. > > OK. > >> The most recent trials have used r1099, but before that I was using >> r1067 and r1072 all with the same results. > > OK. > >> As I say going from one tile to an adjacent one works; but anything with >> an intermediate tile fails. I've tried various routes so I believe the >> problem is general (for me at least!) rather than a specific road that >> is causing the problem. > > Testing with mapsource on tiled maps of the UK and the Netherlands, I > can route across multiple tiles (in one case, I counted 7 tiles). > > However, mapsource often gives up when trying to route long distances > (especially with the UK map compared to the NL) so I wonder if there's > some complexity contstraint that we're not adhering to. > > But to answer your original question, multiple tiles can be routed > across. > > Cheers, > > Mark
Thanks for the feedback. I've just done a new map rerunning splitter and mkgmap r1099 again but I get the same problem. At least you've confirmed it should work so I'll try and do some more thorough testing to see if I can pin down what I'm going wrong. _______________________________________________ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev