Hi Gerd
Thanks for your reply
Yes, I noticed that level 2-4 is allowed as well.
Just going back to an earlier problem,
using the default levels
levels = 0:24, 1:22, 2:20, 3:18
overview-levels = 4:17, 5:16, 6:15, 7:14, 8:12
a) I'm still a bit unclear about what happens if a resolution
a) slots in between two levels , ie resolution 19 will between levels 2
and 3
Will if always get rounded down or does it depend on the nearest level
ie
levels = 0:24, 1:22, 2:20, 3:15
resolution 17 will be plotted as level 3 ?
resolution 19 will be plotted as level 2 ?
B) the default style's lowest resolution is 10 in Polygons
and yet its is lower than level 8 in which case its rounded up to level 8
or does it automatically get assgined a new undeclared level 9?
Just realised 4b must get hard coded to the lowest level (0 ?)
Regards
Nick
On 13/03/2020 13:43, Gerd Petermann wrote:
Hi Nick,
a)
natural=wood [0x50 level 2-4 ]
is allowed.
b)
a level larger than specified in levels gives an error message. For your
example I'd expect
Error in style: Error: Level number too large, max=5
Not sure if that makes sense. For your example I would have expected that
area_city=* [0x03 level 6 continue]
is treated like
area_city=* [0x03 level 0-5 continue]
Gerd
________________________________________
Von: Pinns UK <o...@pinns.co.uk>
Gesendet: Mittwoch, 11. März 2020 09:01
An: Gerd Petermann; mkgmap-dev@lists.mkgmap.org.uk
Betreff: Re: AW: [mkgmap-dev] Resolutions...
Hi Gerd
Thanks that's clear.
I'm just experimenting with the default style rather than my own which
is entirely geared towards hiking.
I can see there is some advantage using levels:
a) you get a clearer picture of which elements get plotted at which
zoom level
b) you only have to change the resolutions in the options file to test
the zooming effects.
btw
a) Can you use the '--' in levels?
ie
natural=wood [0x50 level 2-4 ]
b) I have seen an options file which contains levels 0 --> 5
However in the style itself there is mention of a level 6 eventhough
it's not defined in tghe options file
ie
area_city=* [0x03 level 6 continue]
Is that 'allowed' ?
Regards
Nick
On 11/03/2020 06:56, Gerd Petermann wrote:
Hi Nick,
The behaviour changed in the past, but I think if the style produces an object
for a max resolution X and no level covers exactly this resolution the max
resolution is decremented to the next lower value covered by a level. If there
is no such level the object is not added to the map.
natural=coastline [0x15 resolution 12]
is equal to
natural=coastline [0x15 resolution 12-24]
Not sure what you mean with
"I remember in the past it was said the levels are better than resolutions"
Do you suggest to change the default style to use level instead of resolution?
Gerd
________________________________________
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag von Pinns UK
<o...@pinns.co.uk>
Gesendet: Dienstag, 10. März 2020 18:30
An: mkgmap-dev@lists.mkgmap.org.uk
Betreff: Re: [mkgmap-dev] Resolutions...
Hi Gerd
Just to be a nuisance:
If there is no level beyond level 3 in the default style, ie 4,12
then all resolutions <18 contained in the default style (and there are
quite a few!) only get plotted at level 3?
ie the lowest lines are a boundary and a coastline , both at res 12
Do they only get plotted at level 3 , ie resolution 3
I remember in the past it was said the levels are better than resolutions
R
Nick
On 10/03/2020 13:46, Pinns UK wrote:
Thanks Gerd
r
Nick
On 10/03/2020 12:51, Gerd Petermann wrote:
Hi Nick,
the meaning of these statements depends on the levels option. With
the options in default style
levels = 0:24, 1:22, 2:20, 3:18
the resolution 23 and 22 are at level 1, so resolution 23 is
actually rounded down to 22.
Gerd
________________________________________
Von: mkgmap-dev <mkgmap-dev-boun...@lists.mkgmap.org.uk> im Auftrag
von nwillink <o...@pinns.co.uk>
Gesendet: Dienstag, 10. März 2020 13:39
An: mkgmap-dev@lists.mkgmap.org.uk
Betreff: [mkgmap-dev] Resolutions...
Hi
Can anyone tell me what exactly the '-' in after resolutions means.
I plotted a church resolution 21-23 only to find it does not include
resolution 23.
Somewhere I read that only the resolutions between the numbers are
plotted.
If that is the case what does 23-24 mean ? What resolution is there
between
23 and 24
What happens with resolution 23-23 ?
Does 23-24 mean only level 23
Is 24-23 different from 23-24?
The manual does not seem to tackle this issue.
btw
Have noticed that Basecamp/Mapsource only plots 0x2c poi range at
level 24
So the following might never occur in some GPS devices is except at
resolution 24
0x2c02 [resolution 21 ]
This seems to affect :
viewpoints,churches,castles, schools,amusement parks etc
Regards
Nick
--
Sent from:
http://gis.19327.n8.nabble.com/Mkgmap-Development-f5324443.html
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
_______________________________________________
mkgmap-dev mailing list
mkgmap-dev@lists.mkgmap.org.uk
http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
