The patch titled atmel_serial: use existing console options only if BRG is running has been added to the -mm tree. Its filename is atmel_serial-use-existing-console-options-only-if-brg-is-running.patch
Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: atmel_serial: use existing console options only if BRG is running From: Haavard Skinnemoen <[EMAIL PROTECTED]> If BRGR is zero, the baud rate generator isn't running, so the boot loader can't have initialized the port. Signed-off-by: Haavard Skinnemoen <[EMAIL PROTECTED]> Acked-by: Andrew Victor <[EMAIL PROTECTED]> Tested-by: Marc Pignat <[EMAIL PROTECTED]> Signed-off-by: Andrew Morton <[EMAIL PROTECTED]> --- drivers/serial/atmel_serial.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff -puN drivers/serial/atmel_serial.c~atmel_serial-use-existing-console-options-only-if-brg-is-running drivers/serial/atmel_serial.c --- a/drivers/serial/atmel_serial.c~atmel_serial-use-existing-console-options-only-if-brg-is-running +++ a/drivers/serial/atmel_serial.c @@ -835,13 +835,13 @@ static void __init atmel_console_get_opt { unsigned int mr, quot; -// TODO: CR is a write-only register -// unsigned int cr; -// -// cr = UART_GET_CR(port) & (ATMEL_US_RXEN | ATMEL_US_TXEN); -// if (cr == (ATMEL_US_RXEN | ATMEL_US_TXEN)) { -// /* ok, the port was enabled */ -// } + /* + * If the baud rate generator isn't running, the port wasn't + * initialized by the boot loader. + */ + quot = UART_GET_BRGR(port); + if (!quot) + return; mr = UART_GET_MR(port) & ATMEL_US_CHRL; if (mr == ATMEL_US_CHRL_8) @@ -861,7 +861,6 @@ static void __init atmel_console_get_opt * lower than one of those, as it would make us fall through * to a much lower baud rate than we really want. */ - quot = UART_GET_BRGR(port); *baud = port->uartclk / (16 * (quot - 1)); } _ Patches currently in -mm which might be from [EMAIL PROTECTED] are git-avr32.patch fix-timerfd-breakage-on-avr32-was-re-fix-variable-use-in-avr32-pte_alloc_one.patch git-mtd.patch gpiolib-add-drivers-gpio-directory.patch gpiolib-add-gpio-provider-infrastructure.patch gpiolib-update-documentation-gpiotxt.patch gpiolib-pxa-platform-support.patch gpiolib-pcf857x-i2c-gpio-expander-support.patch gpiolib-mcp23s08-spi-gpio-expander-support.patch gpiolib-pca9539-i2c-gpio-expander-support.patch gpiolib-deprecate-obsolete-pca9539-driver.patch gpiolib-avr32-at32ap-platform-support.patch config_highpte-vs-sub-page-page-tables-avr32-fix.patch read_current_time-cleanups.patch fix-__const_udelay-declaration-and-definition-mismatches.patch atmel_spi-throughput-improvement.patch atmel_spi-chain-dma-transfers.patch atmel_spi-chain-dma-transfers-update.patch atmel_spi-fix-dmachain-oops-with-debug-enabled.patch add-have_oprofile.patch atmel_lcdfb-validate-display-timings.patch sanitize-the-type-of-struct-useru_ar0.patch add-cmpxchg_local-to-avr32.patch tty-let-architectures-override-the-user-kernel-macros.patch maintainers-add-haavard-as-maintainer-of-the-atmel_serial-driver.patch atmel_serial-clean-up-the-code.patch atmel_serial-use-cpu_relax-when-busy-waiting.patch atmel_serial-use-existing-console-options-only-if-brg-is-running.patch atmel_serial-fix-bugs-in-probe-error-path-and-remove.patch atmel_serial-split-the-interrupt-handler.patch atmel_serial-add-dma-support.patch atmel_serial-use-container_of-instead-of-direct-cast.patch atmel_serial-show-tty-name-in-proc-interrupts.patch - To unsubscribe from this list: send the line "unsubscribe mm-commits" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html