The patch titled
     pata_serverworks: Fix cable types and cosmetics
has been removed from the -mm tree.  Its filename was
     pata_serverworks-fix-cable-types-and-cosmetics.patch

This patch was dropped because it was merged into mainline or a subsystem tree

The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/

------------------------------------------------------
Subject: pata_serverworks: Fix cable types and cosmetics
From: Alan Cox <[EMAIL PROTECTED]>

Minor tidying up. Only real change is to return UNK not 80 wire when we
don't know the cable type. This didn't use to matter but with Tejun's
reworking of cable detection it may.

Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
Cc: Jeff Garzik <[EMAIL PROTECTED]>
Cc: Tejun Heo <[EMAIL PROTECTED]>
Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
---

 drivers/ata/pata_serverworks.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff -puN 
drivers/ata/pata_serverworks.c~pata_serverworks-fix-cable-types-and-cosmetics 
drivers/ata/pata_serverworks.c
--- 
a/drivers/ata/pata_serverworks.c~pata_serverworks-fix-cable-types-and-cosmetics
+++ a/drivers/ata/pata_serverworks.c
@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
 
 #define SVWKS_CSB5_REVISION_NEW        0x92 /* min PCI_REVISION_ID for UDMA5 
(A2.0) */
 #define SVWKS_CSB6_REVISION    0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
@@ -102,7 +102,7 @@ static int osb4_cable(struct ata_port *a
 }
 
 /**
- *     csb4_cable      -       CSB5/6 cable detect
+ *     csb_cable       -       CSB5/6 cable detect
  *     @ap: ATA port to check
  *
  *     Serverworks default arrangement is to use the drive side detection
@@ -110,7 +110,7 @@ static int osb4_cable(struct ata_port *a
  */
 
 static int csb_cable(struct ata_port *ap) {
-       return ATA_CBL_PATA80;
+       return ATA_CBL_PATA_UNK;
 }
 
 struct sv_cable_table {
@@ -231,7 +231,6 @@ static unsigned long serverworks_csb_fil
        return ata_pci_default_filter(adev, mask);
 }
 
-
 /**
  *     serverworks_set_piomode -       set initial PIO mode data
  *     @ap: ATA interface
@@ -243,7 +242,7 @@ static unsigned long serverworks_csb_fil
 static void serverworks_set_piomode(struct ata_port *ap, struct ata_device 
*adev)
 {
        static const u8 pio_mode[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
-       int offset = 1 + (2 * ap->port_no) - adev->devno;
+       int offset = 1 + 2 * ap->port_no - adev->devno;
        int devbits = (2 * ap->port_no + adev->devno) * 4;
        u16 csb5_pio;
        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
_

Patches currently in -mm which might be from [EMAIL PROTECTED] are

origin.patch
keyspan-fix-oops.patch
git-arm.patch
pata_pdc202xx_old-fix-crashes-with-atapi.patch
git-net.patch
8390-split-8390-support-into-a-pausing-and-a-non-pausing-driver-core.patch
hci_ldisc-fix-null-pointer-deref.patch
parisc-new-termios-definitions.patch
pcmcia-convert-some-internal-only-ioaddr_t-to-unsigned-int.patch
pcmcia-replace-kio_addr_t-with-unsigned-int-everywhere.patch
serial-keep-the-dtr-setting-for-serial-console.patch
8250c-support-specifying-dw-apb-uarts-in-device-platform_data.patch
avoid-waking-up-closed-serial-ports-on-resume.patch
serial-avoid-stalling-suspend-if-serial-port-wont-drain.patch
serial-speed-setup-failure-reporting.patch
serial-coding-style.patch
sh-termios-ioctl-definitions.patch
git-watchdog.patch
git-x86.patch
geode-lists-are-subscriber-only.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open.patch
get-rid-of-nr_open-and-introduce-a-sysctl_nr_open-fix.patch
sc26xx-new-serial-driver-for-sc2681-uarts.patch
sc26xx-new-serial-driver-for-sc2681-uarts-update.patch
documentation-about-unaligned-memory-access.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline.patch
tty-enable-the-echoing-of-c-in-the-n_tty-discipline-checkpatch-fixes.patch
fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline.patch
fix-ixany-and-restart-after-signal-eg-ctrl-c-in-n_tty-line-discipline-update.patch
tty-kill-tty_flipbuf_size.patch
drivers-edac-turnon-edac-device-error-logging.patch
drivers-edac-use-round_jiffies_relative.patch
drivers-edac-add-cell-xdr-memory-types.patch
drivers-edac-add-cell-mc-driver.patch
drivers-edac-i3000-code-tidying.patch
drivers-edac-i3000-replace-macros-with-functions.patch
drivers-edac-add-freescale-mpc85xx-driver.patch
drivers-edac-add-marvell-mv64x60-driver.patch
drivers-edac-add-marvell-mv64x60-driver-fix.patch
dz-clean-up-and-improve-the-setup-of-termios-settings.patch
char-rocket-switch-long-delay-to-sleep.patch
char-rocket-printk-cleanup.patch
char-char-serial-remove-serial_type_normal-redefines.patch
char-mxser_new-ioaddresses-are-ulong.patch
char-stallion-fix-compiler-warnings.patch
char-riscom8-change-rc_init_drivers-prototype.patch
mxser-mxser_new-first-pass-over-termios-reporting-for-the.patch
char-mxser-ioctl-cleanup.patch
tty-let-architectures-override-the-user-kernel-macros.patch
tty-s390-support-for-termios2.patch
moxa-first-pass-at-termios-reporting.patch
n_tty-clean-up-old-code-to-follow-coding-style-and-mostly-checkpatch.patch
rocket-first-pass-at-termios-reporting.patch
rocket-dont-let-random-users-reset-the-controller.patch
tty_audit-fix-checkpatch-complaint.patch
tty_io-drag-screaming-into-coding-style-compliance.patch
tty_ioctl-drag-screaming-into-compliance-with-the-coding.patch
8250_early-coding-style.patch
8250_gsc-coding-style.patch
8250_hp300-coding-style.patch
8250_hub6-codding-style.patch
8250_pci-coding-style.patch
serial8250-coding-style.patch
8250-enable-rate-reporting-via-termios.patch
serial_core-bring-mostly-into-line-with-coding-style.patch
smbios-dmi-add-type-41-=-onboard-devices-extended-information.patch

-
To unsubscribe from this list: send the line "unsubscribe mm-commits" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to