Revision: 12d9ef39e6c5
Author: [email protected] <[email protected]>
Date: Thu Jun 7 03:00:11 2012
Log: Revert back formating
http://code.google.com/p/jss7/source/detail?r=12d9ef39e6c5&repo=wiki
Modified:
/SS7Introduction.wiki
=======================================
--- /SS7Introduction.wiki Thu Jun 7 02:57:55 2012
+++ /SS7Introduction.wiki Thu Jun 7 03:00:11 2012
@@ -10,14 +10,16 @@
The hardware and software functions of the SS7 protocol are divided into
functional abstractions called "levels". These levels map loosely to the
Open Systems Interconnect (OSI) 7-layer model defined by the International
Standards Organization (ISO).
- * ==== Message Transfer Part ==== The Message Transfer Part (MTP) is
divided into three levels. The lowest level, *MTP Level 1*, is equivalent
to the OSI Physical Layer. MTP Level 1 defines the physical, electrical,
and functional characteristics of the digital signaling link. Physical
interfaces defined include E-1 (2048 kb/s; 32 64 kb/s channels), DS-1 (1544
kb/s; 24 64kb/s channels), V.35 (64 kb/s), DS-0 (64 kb/s), and DS-0A (56
kb/s).
+==== Message Transfer Part ====
+The Message Transfer Part (MTP) is divided into three levels. The lowest
level, *MTP Level 1*, is equivalent to the OSI Physical Layer. MTP Level 1
defines the physical, electrical, and functional characteristics of the
digital signaling link. Physical interfaces defined include E-1 (2048 kb/s;
32 64 kb/s channels), DS-1 (1544 kb/s; 24 64kb/s channels), V.35 (64 kb/s),
DS-0 (64 kb/s), and DS-0A (56 kb/s).
*MTP Level 2* ensures accurate end-to-end transmission of a message across
a signaling link. Level 2 implements flow control, message sequence
validation, and error checking. When an error occurs on a signaling link,
the message (or set of messages) is retransmitted. MTP Level 2 is
equivalent to the OSI Data Link Layer.
*MTP Level 3* provides message routing between signaling points in the SS7
network. MTP Level 3 re-routes traffic away from failed links and signaling
points and controls traffic when congestion occurs. MTP Level 3 is
equivalent to the OSI Network Layer.
- * ==== ISDN User Part (ISUP) ==== The ISDN User Part (ISUP) defines the
protocol used to set-up, manage, and release trunk circuits that carry
voice and data between terminating line exchanges (e.g., between a calling
party and a called party). ISUP is used for both ISDN and non-ISDN calls.
However, calls that originate and terminate at the same switch do not use
ISUP signaling.
+==== ISDN User Part (ISUP) ====
+The ISDN User Part (ISUP) defines the protocol used to set-up, manage, and
release trunk circuits that carry voice and data between terminating line
exchanges (e.g., between a calling party and a called party). ISUP is used
for both ISDN and non-ISDN calls. However, calls that originate and
terminate at the same switch do not use ISUP signaling.
==== Telephone User Part (TUP) ====