On Fri, Jun 17, 2016 at 2:16 PM, Thomas Lang <thomas.l...@tactilo.eu> wrote: > I have been following the discussion on the mail-list. I’m trying to get > network-manager working with a MC7455. I upgraded the kernel to 4.6.2. I > updated the libqmi (1.14.2), MomdemManager (1.5.992) and NetworkManager > (1.2.0) to the latest versions. The modemmanager can use the qmi interface. > I can connect with the mmcli to the network. I can receive an ip address > with udhcpc -I command. The problem I still have I can’t get the > Network-Manager to start the connection. I have read the mail below that > states the NetworkManager will config the connection for you. It seems that > the dhcp set-up from the NetworkManager fails, see trace below. Now my > question what can I do to get the network-manager to set-up the connection.
That is strange; for the MC7455, when using raw-ip, we are defaulting to static IP setup, not DHCP, so NM shouldn't even try DHCP. Can you get us the output of the bearer info generated during the connection request? (something like "mmcli -b 0", or some other index). Anyway, it would also be good to get MM/NM debug logs, see: https://www.freedesktop.org/wiki/Software/ModemManager/Debugging/ -- Aleksander https://aleksander.es _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
