I'm not even sure I'm starting at the correct point but here goes ... I've compiled ModemManager (and libqmi and libmbim) on my Debian machine. Hopefully I've put everything in the correct places (I used /usr to clobber the debian apt installed ancient libraries). When I start ModemManager and use mmcli, I get no errors so that's a good start.
Here's what I get when I start up (hopefully close to recent): ModemManager & mmcli say 1.7.0 I'm running this script (after restarting MomdemManager to get the most recent running): #!/bin/sh # https://mail.gnome.org/archives/networkmanager-list/2013-April/msg00101.html mmcli -L MODEM=$(mmcli -L | grep freedesktop | awk '{ print $1}') if [ -z "${MODEM}" ]; then echo "No modem found, please check modem" exit 2 fi # APN="${APN-internet}" mmcli -v -m ${MODEM} -e date ; echo "\nCurrent Modem Configuration:" mmcli -m ${MODEM} mmcli -v -m ${MODEM} --simple-connect="apn=${APN}" mmcli -v -m ${MODEM} --simple-connect="apn=${APN}" if [ $? -eq 1 ]; then echo "Simple connect failed" mmcli -m ${MODEM} --simple-disconnect exit 1 fi mmcli -v -m ${MODEM} --location-get-3gpp date ; echo "\nObtaining DHCP lease" dhclient -d -4 wwan0 It all seems to run fine but I get no IP address on the wwan0 (well 169.254.156.247) Any ideas in what I should do next to debug this? The trace of the above command is at: http://ushomeautomation.com/temp/mmcli.out -- Linux Home Automation Neil Cherry [email protected] http://www.linuxha.com/ Main site http://linuxha.blogspot.com/ My HA Blog Author of: Linux Smart Homes For Dummies _______________________________________________ ModemManager-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
