Hey > > I am trying to get my Iridium 9522b modem recognized using mmcli. It is > connected on /dev/ttyUSB2 with 19200, 8, N, 1. I can successfully > communicate via AT commands through pyserial or minicom, so I'm confident > that it is functioning. > > Below are the scan and list outputs from mmcli as well as lsusb. The > usb-serial cable connected to the Iridium is Bus001 Device005. > > pi@raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $ sudo mmcli -S > successfully requested to scan devices > pi@raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $ mmcli -L > > No modems were found > > pi@raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $ lsusb > Bus 001 Device 006: ID 0403:6001 Future Technology Devices International, > Ltd FT232 USB-Serial (UART) IC > Bus 001 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial > Port > Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, > Ltd FT232 USB-Serial (UART) IC > Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 > Fast Ethernet Adapter > Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > pi@raspberrypi:/usr/lib/arm-linux-gnueabihf/ModemManager $ > > I know that there is a plugin for Iridium modems, specifically this 9522b > that I am using. Is there something I need to do to get it to detect it? >
Can you update the baudrate configuration in the modem itself to be 57600bps? Also, could you run ModemManager in debug mode to get full debug logs? See: https://www.freedesktop.org/wiki/Software/ModemManager/Debugging/ -- Aleksander https://aleksander.es _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel