Am Sonntag, 12. Mai 2019, 16:43:23 CEST schrieb Reinhard Speyerer: > Hi Thomas, > > for the EM7565 you should have used AT!USBCOMP=1,3,100D to switch it to MBIM > mode and AT!USBCOMP=1,3,10D to switch it back to QMI.
Thanks a lot! Linux is more tolerant than windows in this case. The wrong mbim layout worked under linux, but it confused windows. Now it works with qmi and mbim under linux and windows. The new/right mbim-layout confuses me a little bit: [ 452.432305] usb 1-3: new high-speed USB device number 6 using xhci_hcd [ 452.581789] usb 1-3: config 1 has an invalid interface number: 12 but max is 4 [ 452.581808] usb 1-3: config 1 has an invalid interface number: 13 but max is 4 [ 452.581818] usb 1-3: config 1 has an invalid interface number: 13 but max is 4 [ 452.581828] usb 1-3: config 1 has no interface number 1 [ 452.581837] usb 1-3: config 1 has no interface number 4 [ 452.582676] usb 1-3: New USB device found, idVendor=1199, idProduct=9091 [ 452.582692] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 452.582703] usb 1-3: Product: Sierra Wireless EM7565 Qualcomm® Snapdragon™ X16 LTE-A [ 452.582712] usb 1-3: Manufacturer: Sierra Wireless, Incorporated [ 452.582721] usb 1-3: SerialNumber: UF90947406011505 [ 452.584984] qcserial 1-3:1.0: Qualcomm USB modem converter detected [ 452.587027] usb 1-3: Qualcomm USB modem converter now attached to ttyUSB0 [ 452.587937] qcserial 1-3:1.2: Qualcomm USB modem converter detected [ 452.588261] usb 1-3: Qualcomm USB modem converter now attached to ttyUSB1 [ 452.589197] qcserial 1-3:1.3: Qualcomm USB modem converter detected [ 452.589470] usb 1-3: Qualcomm USB modem converter now attached to ttyUSB2 [ 452.609615] cdc_mbim 1-3:1.12: cdc-wdm0: USB WDM device [ 452.610398] cdc_mbim 1-3:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-3, CDC MBIM, 82:82:b6:87:df:91 Regarding APN-selection, windows is still a mystery to me. dualstack, single stack, user defined, modem profile... I never get, what I expect. And in case of IPv6-only sometimes clat starts, sometimes it doesn't start. But that is not scope of this list. The mm/nm team does, what I expect - Thanks! Regards, Thomas _______________________________________________ ModemManager-devel mailing list ModemManager-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
