Re: [mp2] SOLVED "make test" fails: "failed to map segment from shared object: Operation not permitted"

Fri, 20 Jan 2006 09:01:59 -0800 

PEBCAK. The issue was this: the mod_perl2 test runs the
suite as 'nobody', which means you should not (and can not)
run the tests from root's home directory. The test warns:

   There are several ways to resolve this issue. One is to
   move and rebuild the distribution to '/tmp/' and repeat
   the 'make test' phase.

/However/, it's often a good idea to mount /tmp with the
"noexec" flag so executable code (including shared objects!)
can't be run, and that was the case here. Thanks to everyone
who replied!

____________________________________________________________
Eamon Daly
----- Original Message ----- From: "Eamon Daly" <[EMAIL PROTECTED]> 
To: <modperl@perl.apache.org>
Sent: Thursday, January 19, 2006 9:35 PM
Subject: [mp2] "make test" fails: "failed to map segment from shared object: Operation not permitted" 



1. Problem Description:

Hey, all. I'm trying to build mod_perl against the stock
httpd in RedHat 4ES. The build runs without issue, but
"make test" fails immediately with the following error:
Can't load '/tmp/mod_perl-2.0.2/blib/arch/auto/ModPerl/Const/Const.so' for module ModPerl::Const: /tmp/mod_perl-2.0.2/blib/arch/auto/ModPerl/Const/Const.so: failed to map segment from shared object: Operation not permitted at /usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 230. 
at /tmp/mod_perl-2.0.2/blib/lib/Apache2/Const.pm line 17

A transcript of "make test" follows after the core trace
section.

2. Used Components and their Configuration:

*** mod_perl version 2.000002

*** using /tmp/mod_perl-2.0.2/lib/Apache2/BuildConfig.pm

*** Makefile.PL options:
 MP_APR_LIB     => aprext
 MP_APXS        => /usr/sbin/apxs
 MP_COMPAT_1X   => 1
 MP_GENERATE_XS => 1
 MP_LIBNAME     => mod_perl
 MP_USE_DSO     => 1


*** /usr/sbin/httpd -V
Server version: Apache/2.0.52
Server built:   Dec 15 2005 04:09:14
Server's Module Magic Number: 20020903:9
Architecture:   32-bit
Server compiled with....
-D APACHE_MPM_DIR="server/mpm/prefork"
-D APR_HAS_SENDFILE
-D APR_HAS_MMAP
-D APR_HAVE_IPV6 (IPv4-mapped addresses enabled)
-D APR_USE_SYSVSEM_SERIALIZE
-D APR_USE_PTHREAD_SERIALIZE
-D SINGLE_LISTEN_UNSERIALIZED_ACCEPT
-D APR_HAS_OTHER_CHILD
-D AP_HAVE_RELIABLE_PIPED_LOGS
-D HTTPD_ROOT="/etc/httpd"
-D SUEXEC_BIN="/usr/sbin/suexec"
-D DEFAULT_PIDLOG="logs/httpd.pid"
-D DEFAULT_SCOREBOARD="logs/apache_runtime_status"
-D DEFAULT_LOCKFILE="logs/accept.lock"
-D DEFAULT_ERRORLOG="logs/error_log"
-D AP_TYPES_CONFIG_FILE="conf/mime.types"
-D SERVER_CONFIG_FILE="conf/httpd.conf"

*** /usr/bin/ldd /usr/sbin/httpd
       libpcre.so.0 => /lib/libpcre.so.0 (0x0056e000)
       libpcreposix.so.0 => /usr/lib/libpcreposix.so.0 (0x00a59000)
       libaprutil-0.so.0 => /usr/lib/libaprutil-0.so.0 (0x00276000)
       libldap-2.2.so.7 => /usr/lib/libldap-2.2.so.7 (0x0033d000)
       liblber-2.2.so.7 => /usr/lib/liblber-2.2.so.7 (0x00d11000)
       libdb-4.2.so => /lib/tls/i686/libdb-4.2.so (0x00111000)
       libexpat.so.0 => /usr/lib/libexpat.so.0 (0x00859000)
       libapr-0.so.0 => /usr/lib/libapr-0.so.0 (0x009f4000)
       librt.so.1 => /lib/tls/librt.so.1 (0x001df000)
       libm.so.6 => /lib/tls/libm.so.6 (0x00a7d000)
       libcrypt.so.1 => /lib/libcrypt.so.1 (0x001f3000)
       libpthread.so.0 => /lib/tls/libpthread.so.0 (0x00221000)
       libdl.so.2 => /lib/libdl.so.2 (0x008d1000)
       libc.so.6 => /lib/tls/libc.so.6 (0x00d8a000)
       libresolv.so.2 => /lib/libresolv.so.2 (0x00233000)
       libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00246000)
       libssl.so.4 => /lib/libssl.so.4 (0x004db000)
       libcrypto.so.4 => /lib/libcrypto.so.4 (0x0036e000)
       /lib/ld-linux.so.2 (0x00ad1000)
       libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x0025a000)
       libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x0028a000)
       libcom_err.so.2 => /lib/libcom_err.so.2 (0x0026e000)
       libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x00c4f000)
       libz.so.1 => /usr/lib/libz.so.1 (0x007a9000)


*** (apr|apu)-config linking info

-laprutil-0 -lldap -llber -ldb-4.2 -lexpat
-lapr-0 -lrt -lm -lcrypt  -lpthread -ldl



*** /usr/bin/perl -V
Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
 Platform:
osname=linux, osvers=2.6.9-22.18.bz155725.elsmp, archname=i386-linux-thread-multi uname='linux hs20-bc1-4.build.redhat.com 2.6.9-22.18.bz155725.elsmp #1 smp thu nov 17 15:34:08 est 2005 i686 i686 i386 gnulinux ' config_args='-des -Doptimize=-O2 -g -pipe -m32 -march=i386 -mtune=pentium4 -Dversion=5.8.5 -Dmyhostname=localhost [EMAIL PROTECTED] -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dinc_version_list=5.8.4 5.8.3 5.8.2 5.8.1 5.8.0' 
   hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define 
   useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
   use64bitint=undef use64bitall=undef uselongdouble=undef
   usemymalloc=n, bincompat5005=undef
 Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm', 
   optimize='-O2 -g -pipe -m32 -march=i386 -mtune=pentium4',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm' ccversion='', gccversion='3.4.5 20051201 (Red Hat 3.4.5-1)', gccosandvers='' 
   intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
   d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 
   alignbytes=4, prototype=define
 Linker and Libraries:
   ld='gcc', ldflags =' -L/usr/local/lib'
   libpth=/usr/local/lib /lib /usr/lib
   libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
   perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
   libc=/lib/libc-2.3.4.so, so=so, useshrplib=true, libperl=libperl.so
   gnulibc_version='2.3.4'
 Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.5/i386-linux-thread-multi/CORE' 
   cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'


Characteristics of this binary (from libperl):
Compile-time options: DEBUGGING MULTIPLICITY USE_ITHREADS USE_LARGE_FILES PERL_IMPLICIT_CONTEXT 
 Built under linux
 Compiled at Dec 16 2005 14:06:35
 %ENV:
   PERL_LWP_USE_HTTP_10="1"
 @INC:
   /usr/lib/perl5/5.8.5/i386-linux-thread-multi
   /usr/lib/perl5/5.8.5
   /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi
   /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi
   /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi
   /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi
   /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi
   /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
   /usr/lib/perl5/site_perl/5.8.5
   /usr/lib/perl5/site_perl/5.8.4
   /usr/lib/perl5/site_perl/5.8.3
   /usr/lib/perl5/site_perl/5.8.2
   /usr/lib/perl5/site_perl/5.8.1
   /usr/lib/perl5/site_perl/5.8.0
   /usr/lib/perl5/site_perl
   /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi
   /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi
   /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi
   /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi
   /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi
   /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
   /usr/lib/perl5/vendor_perl/5.8.5
   /usr/lib/perl5/vendor_perl/5.8.4
   /usr/lib/perl5/vendor_perl/5.8.3
   /usr/lib/perl5/vendor_perl/5.8.2
   /usr/lib/perl5/vendor_perl/5.8.1
   /usr/lib/perl5/vendor_perl/5.8.0
   /usr/lib/perl5/vendor_perl
   .

*** Packages of interest status:

Apache2            : -
Apache2::Request   : -
CGI                : 3.15
ExtUtils::MakeMaker: 6.17
LWP                : 5.79, 5.805
mod_perl           : -
mod_perl2          : 2.000002


3. This is the core dump trace: (if you get a core dump):

 [CORE TRACE COMES HERE]

This report was generated by t/REPORT on Fri Jan 20 03:27:20 2006 GMT.

4. Transcript of "make test":

cd "src/modules/perl" && make
make[1]: Entering directory `/tmp/mod_perl-2.0.2/src/modules/perl'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/tmp/mod_perl-2.0.2/src/modules/perl'
make[1]: Entering directory `/tmp/mod_perl-2.0.2/Apache-Test'
make[1]: Leaving directory `/tmp/mod_perl-2.0.2/Apache-Test'
make[1]: Entering directory `/tmp/mod_perl-2.0.2/ModPerl-Registry'
make[1]: Leaving directory `/tmp/mod_perl-2.0.2/ModPerl-Registry'
make[1]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS'
make[2]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Base64'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Base64'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Brigade'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Brigade'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Bucket'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Bucket'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/BucketAlloc'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/BucketAlloc'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/BucketType'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/BucketType'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Date'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Date'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Error'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Error'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Finfo'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Finfo'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/IpSubnet'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/IpSubnet'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/OS'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/OS'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Pool'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Pool'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/SockAddr'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/SockAddr'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Socket'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Socket'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Status'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Status'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/String'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/String'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Table'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Table'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/ThreadMutex'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/ThreadMutex'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/URI'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/URI'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/UUID'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/UUID'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Util'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR/Util'
make[2]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/APR'
make[2]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Access'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Access'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/CmdParms'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/CmdParms'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Command'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Command'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Connection' 
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Connection'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Directive'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Directive'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Filter'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Filter'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/FilterRec'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/FilterRec'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/HookRun'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/HookRun'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Log'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Log'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/MPM'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/MPM'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Module'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Module'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Process'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Process'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/RequestIO'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/RequestIO'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/RequestRec' 
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/RequestRec'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/RequestUtil' make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/RequestUtil' 
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Response'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Response'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/ServerRec'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/ServerRec'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/ServerUtil' 
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/ServerUtil'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/SubProcess' 
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/SubProcess'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/SubRequest' 
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/SubRequest'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/URI'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/URI'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Util'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2/Util'
make[2]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/Apache2'
make[2]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/ModPerl'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/ModPerl/Global'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/ModPerl/Global'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/WrapXS/ModPerl/Util'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/ModPerl/Util'
make[2]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS/ModPerl'
make[1]: Leaving directory `/tmp/mod_perl-2.0.2/WrapXS'
make[1]: Entering directory `/tmp/mod_perl-2.0.2/xs'
make[2]: Entering directory `/tmp/mod_perl-2.0.2/xs/APR'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/xs/APR/APR'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/xs/APR/APR'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/xs/APR/Const'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/xs/APR/Const'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/xs/APR/PerlIO'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/xs/APR/PerlIO'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/xs/APR/aprext'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/xs/APR/aprext'
make[2]: Leaving directory `/tmp/mod_perl-2.0.2/xs/APR'
make[2]: Entering directory `/tmp/mod_perl-2.0.2/xs/Apache2'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/xs/Apache2/Const'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/xs/Apache2/Const'
make[2]: Leaving directory `/tmp/mod_perl-2.0.2/xs/Apache2'
make[2]: Entering directory `/tmp/mod_perl-2.0.2/xs/ModPerl'
make[3]: Entering directory `/tmp/mod_perl-2.0.2/xs/ModPerl/Const'
make[3]: Leaving directory `/tmp/mod_perl-2.0.2/xs/ModPerl/Const'
make[2]: Leaving directory `/tmp/mod_perl-2.0.2/xs/ModPerl'
make[1]: Leaving directory `/tmp/mod_perl-2.0.2/xs'
/usr/bin/perl -Iblib/arch -Iblib/lib \
t/TEST -clean
[warning] setting ulimit to allow core files
ulimit -c unlimited; /usr/bin/perl /tmp/mod_perl-2.0.2/t/TEST -clean
APACHE_TEST_GROUP= APACHE_TEST_HTTPD= APACHE_TEST_PORT= APACHE_TEST_USER= APACHE_TEST_APXS= \ 
/usr/bin/perl -Iblib/arch -Iblib/lib \
t/TEST -bugreport -verbose=0
[warning] setting ulimit to allow core files
ulimit -c unlimited; /usr/bin/perl /tmp/mod_perl-2.0.2/t/TEST -bugreport -verbose=0 Can't load '/tmp/mod_perl-2.0.2/blib/arch/auto/ModPerl/Const/Const.so' for module ModPerl::Const: /tmp/mod_perl-2.0.2/blib/arch/auto/ModPerl/Const/Const.so: failed to map segment from shared object: Operation not permitted at /usr/lib/perl5/5.8.5/i386-linux-thread-multi/DynaLoader.pm line 230. 
at /tmp/mod_perl-2.0.2/blib/lib/Apache2/Const.pm line 17
Compilation failed in require at /tmp/mod_perl-2.0.2/blib/lib/Apache2/Const.pm line 17. BEGIN failed--compilation aborted at /tmp/mod_perl-2.0.2/blib/lib/Apache2/Const.pm line 17. Compilation failed in require at /tmp/mod_perl-2.0.2/t/response/TestApache/subprocess.pm line 13. BEGIN failed--compilation aborted at /tmp/mod_perl-2.0.2/t/response/TestApache/subprocess.pm line 13. Compilation failed in require at /tmp/mod_perl-2.0.2/Apache-Test/lib/Apache/TestConfigPerl.pm line 593. Bareword "Apache2::Const::OK" not allowed while "strict subs" in use at /tmp/mod_perl-2.0.2/t/response/TestDirective/perlrequire.pm line 26. Compilation failed in require at /tmp/mod_perl-2.0.2/Apache-Test/lib/Apache/TestConfigPerl.pm line 593. Undefined subroutine &TestDirective::perlrequire::APACHE_TEST_CONFIGURE called at /tmp/mod_perl-2.0.2/Apache-Test/lib/Apache/TestConfigPerl.pm line 597. Bareword "Apache2::Const::OK" not allowed while "strict subs" in use at /tmp/mod_perl-2.0.2/t/response/TestDirective/perlmodule.pm line 24. Compilation failed in require at /tmp/mod_perl-2.0.2/Apache-Test/lib/Apache/TestConfigPerl.pm line 593. Undefined subroutine &TestDirective::perlmodule::APACHE_TEST_CONFIGURE called at /tmp/mod_perl-2.0.2/Apache-Test/lib/Apache/TestConfigPerl.pm line 597. 
[warning] root mode: changing the files ownership to 'nobody' (99:99)
[warning] testing whether 'nobody' is able to -rwx /tmp/mod_perl-2.0.2/t
"/usr/bin/perl" -Mlib=/tmp/mod_perl-2.0.2/Apache-Test/lib -MApache::TestRun -e 'eval { Apache::TestRun::run_root_fs_test(99, 99, q[/tmp/mod_perl-2.0.2/t]) }'; 


[warning] result: OK
[warning] the client side drops 'root' permissions and becomes 'nobody'
/usr/sbin/httpd -d /tmp/mod_perl-2.0.2/t -f /tmp/mod_perl-2.0.2/t/conf/httpd.conf -D APACHE2 -D PERL_USEITHREADS 
using Apache/2.0.52 (prefork MPM)
waiting 120 seconds for server to start: .Syntax error on line 204 of /tmp/mod_perl-2.0.2/t/conf/httpd.conf: Cannot load /tmp/mod_perl-2.0.2/src/modules/perl/mod_perl.so into server: /tmp/mod_perl-2.0.2/src/modules/perl/mod_perl.so: failed to map segment from shared object: Operation not permitted 
[  error]
server has died with status 255 (t/logs/error_log wasn't created, start the server in the debug mode) sh: line 1: 999 Terminated /usr/bin/perl /tmp/mod_perl-2.0.2/t/TEST -bugreport -verbose=0 
make: *** [run_tests] Error 143

Reply via email to